Difference between revisions of "Getting Started Overview"
From ESS-WIKI
Billy.soong (talk | contribs) (Created page with "This document is a guide on how to work with the Android code, It describes the methods to setup the environment to apply i.MX android and build the entire android s...") |
Billy.soong (talk | contribs) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | This document is a guide on how to work with the Android code, | + | This document is a guide on how to work with the Android code, it describes the methods to setup the environment to apply i.MX android and build the entire android system. |
It also explains how to develop custom board and hardware setting. | It also explains how to develop custom board and hardware setting. | ||
| − | To starting setup PC requirements, please | + | To starting setup PC requirements, please refer to section [http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Android/Gettingstarted/Development_Environment Development Environment] and make sure you have gone through the datasheets of the modules and carrier borad, |
Latest revision as of 09:36, 25 January 2017
This document is a guide on how to work with the Android code, it describes the methods to setup the environment to apply i.MX android and build the entire android system.
It also explains how to develop custom board and hardware setting.
To starting setup PC requirements, please refer to section Development Environment and make sure you have gone through the datasheets of the modules and carrier borad,