Difference between revisions of "IoTGateway/BSP/Android/Gettingstarted/How to configure Capacitive Multi-touch Display"
From ESS-WIKI
Line 51: | Line 51: | ||
Show touch points on the screen | Show touch points on the screen | ||
− | <pre> | + | <pre>Settings > Developer Options > Show touches |
− | Settings > Developer Options > | + | Settings > Developer Options > pointer location |
</pre> | </pre> |
Revision as of 08:28, 3 February 2017
Configure
- HID interface
Enable HID in menuconfig
Device Drivers ---> Input device support ---> <*> Event interface Miscellaneous devices ---> <*>User level driver support HID Devices ---> [*]/dev/hidraw raw HID device support Special HID drivers ---> <*> HID Multitouch panels
- I2C interface
Enable I2C bus in menuconfig
Device drivers ---> I2C support ---> <*> I2C support [*] Enable compatibility bits for old user-space <*> I2C device interface <*> I2C bus multiplexing support Multiplexer I2C Chip support --->
copy and rename .config to arch/arm/configs/imx_v7_android_defconfig
Test
The getevent tool provides information about the touch device.
# getevent -lt [ 78826.389007] EV_ABS ABS_MT_TRACKING_ID 0000001f [ 78826.389038] EV_ABS ABS_MT_PRESSURE 000000ab [ 78826.389038] EV_ABS ABS_MT_POSITION_X 000000ab [ 78826.389068] EV_ABS ABS_MT_POSITION_Y 0000025b [ 78826.389068] EV_ABS ABS_MT_SLOT 00000001 [ 78826.389068] EV_ABS ABS_MT_TRACKING_ID 00000020 [ 78826.389068] EV_ABS ABS_MT_PRESSURE 000000b9 [ 78826.389099] EV_ABS ABS_MT_POSITION_X 0000019e [ 78826.389099] EV_ABS ABS_MT_POSITION_Y 00000361 [ 78826.389099] EV_SYN SYN_REPORT 00000000 [ 78826.468688] EV_ABS ABS_MT_SLOT 00000000 [ 78826.468688] EV_ABS ABS_MT_TRACKING_ID ffffffff [ 78826.468719] EV_ABS ABS_MT_SLOT 00000001 [ 78826.468719] EV_ABS ABS_MT_TRACKING_ID ffffffff [ 78826.468719] EV_SYN SYN_REPORT 00000000
Show touch points on the screen
Settings > Developer Options > Show touches Settings > Developer Options > pointer location