Difference between revisions of "WISE-1530 SDK"
From ESS-WIKI
Erick.huang (talk | contribs) (Created page with "<parsererror style="display: block; white-space: pre; border: 2px solid #c77; padding: 0 1em 0 1em; margin: 1em; background-color: #fdd; color: black"> === This page contains...") |
Erick.huang (talk | contribs) |
||
| Line 1: | Line 1: | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
= Preparing for Hardware = | = Preparing for Hardware = | ||
The user needs to prepare for hardware as following: | The user needs to prepare for hardware as following: | ||
| − | *WISE-1530, WISE-1500 and WISE-ED22. | + | *WISE-1530, WISE-1500 and WISE-ED22. |
| + | *802.11b/g/n (2.4 GHz) Wireless Access Point (AP). | ||
| + | *PC running the MicrosoftR WindowsR 7 operating systems | ||
| − | Please refer to the following steps for setup a WISE series of boards before | + | Please refer to the following steps for setup a WISE series of boards before using WISE-1520. |
'''Step01:''' Please prepare boards as below. | '''Step01:''' Please prepare boards as below. | ||
| + | |||
| + | [[File:WISE-1530 hardware setup.png|RTENOTITLE]] | ||
| + | |||
| + | '''?''' WISE-1530 | ||
| + | |||
| + | '''?''' WISE-1500 | ||
| + | |||
| + | '''?''' WISE-ED22 | ||
| + | |||
| + | '''?''' WISE-ED22 reset button | ||
| + | |||
| + | '''?''' CN2 on WISE-1500 | ||
| + | |||
| + | '''?''' SW3 on WISE-1500 | ||
| + | |||
| + | *Please check pin1 and pin2 to “OFF” as default. | ||
| + | *Switch pin2 to decide whether running “backup to default” while device | ||
| + | |||
| + | booting. “ON”: enabled, “OFF”: disable | ||
| + | |||
| + | '''?''' One reset button on WISE-1500 and the other on WISE-ED22 | ||
| + | |||
| + | '''? '''Micro USB connector | ||
| + | |||
| + | *Drag-n-drop programming | ||
| + | *Serial port and debugging | ||
| + | *Power supplies for UART1 debug port | ||
| + | |||
| + | '''?''' RF connector | ||
| + | |||
| + | '''Step02:''' Connect the WISE-ED22 to PC using micro-USB cable. | ||
| + | |||
| + | * Install Driver ( [[https://developer.mbed.org/media/downloads/drivers/ https://developer.mbed.org/media/downloads/drivers/] | ||
| + | |||
| + | mbedWinSerial_16466.exe Download latest driver] ) | ||
| + | |||
| + | *The device will be visible in the Device Manager as below, user can use | ||
| + | |||
| + | serial tools (putty, tera term ...etc.) to key in command. | ||
| + | |||
| + | [[File:Mbed uart.png|649x466px|Mbed uart.png]] | ||
| + | [[Category:Editor]] | ||
Revision as of 09:53, 18 July 2017
Preparing for Hardware
The user needs to prepare for hardware as following:
- WISE-1530, WISE-1500 and WISE-ED22.
- 802.11b/g/n (2.4 GHz) Wireless Access Point (AP).
- PC running the MicrosoftR WindowsR 7 operating systems
Please refer to the following steps for setup a WISE series of boards before using WISE-1520.
Step01: Please prepare boards as below.
? WISE-1530
? WISE-1500
? WISE-ED22
? WISE-ED22 reset button
? CN2 on WISE-1500
? SW3 on WISE-1500
- Please check pin1 and pin2 to “OFF” as default.
- Switch pin2 to decide whether running “backup to default” while device
booting. “ON”: enabled, “OFF”: disable
? One reset button on WISE-1500 and the other on WISE-ED22
? Micro USB connector
- Drag-n-drop programming
- Serial port and debugging
- Power supplies for UART1 debug port
? RF connector
Step02: Connect the WISE-ED22 to PC using micro-USB cable.
- Install Driver ( [https://developer.mbed.org/media/downloads/drivers/
mbedWinSerial_16466.exe Download latest driver] )
- The device will be visible in the Device Manager as below, user can use
serial tools (putty, tera term ...etc.) to key in command.
