Difference between revisions of "WISE-1530 RF Continue Tx Manual"
Erick.huang (talk | contribs) |
Erick.huang (talk | contribs) |
||
| Line 57: | Line 57: | ||
<span style="background-color:#D3D3D3;">Ex: iperf -c 192.168.1.1 -u -t 30</span> | <span style="background-color:#D3D3D3;">Ex: iperf -c 192.168.1.1 -u -t 30</span> | ||
| − | + | <br/> | |
Revision as of 03:45, 19 July 2017
Preparing for Hardware
The user needs to prepare for hardware as following:
- WISE-1530, WISE-1500 and WISE-ED22.
- 802.11b/g/n (2.4 GHz) Wireless Access Point (AP).
- PC running the Microsoft® Windows® 7 operating systems
Please refer to the following steps for setup a WISE-1530 boards.
Step01: Please prepare boards as below.
① WISE-1530
② WISE-1500
③ Power connector
④ Reset button
⑤ UART connector
⑥ RF connector
Step02: Connect the WISE-1530 to PC via USB-to-UART cable.
- Install USB-to-UART driver.
- The device will be visible in the Device Manager as below, user can use serial port tools (putty, tera term ...etc.).
RF Test Command
Launch serial port tool, you can see " Console app start, type 'help' " on screen, after power on or reset.
Join: Connect to AP
join <ssid> <open|wpa_aes|wpa_tkip|wpa2|wpa2_tkip|wpa2_aes|wep> [key] [channel] [ip netmask gateway]
Ex: join join RT66 wpa2_aes 987135238
Ping:
ping <destination> [-i <interval in ms>] [-n <number>] [-l <length>]
Ex: ping 192.168.1.1 -i 10 -n 10
Iperf: Test Tx
iperf [-s|-c host ip] [options]
-u: use UDP mode
-t: time(second)
Ex: iperf -c 192.168.1.1 -u -t 30