Difference between revisions of "IoTGateway/Webmin"

Revision as of 10:43, 1 March 2016 (view source) Chinchen.lin (talk | contribs) (→‎Network Diagnostic) ← Older edit		Revision as of 10:46, 1 March 2016 (view source) Chinchen.lin (talk | contribs) (→‎System Time) Newer edit →
Line 169:		Line 169:
	== System Time ==		== System Time ==
−	=== Date and Time ===	+
−	=== Time zone ===	+	=== Set Time ===
−	=== NTP server ===	+	This form is for changing the system's current time, which is used by all running processes. On operating systems that have a separate hardware clock, it can be used to set that too.
		+
		+	[[File:Webmin settime.png|400px]]
		+
		+	=== Change time zone ===
		+	This form allows you to set the system's default time zone, which is used to convert the system time to a human-readable format and offset.
		+
		+	[[File:Webmin changetz.png|400px]]
		+
		+	=== Time server sync ===
		+	This form is for configuring the system to automatically synchronize the time with a remote server. Synchronization will be done using the Unix time protocol or NTP, depending on which commands are installed and what the remote system supports.
		+
		+	[[File:Webmin ntp.png|400px]]
	== WISE Connection Status ==		== WISE Connection Status ==

---

Revision as of 10:46, 1 March 2016

Default Setting

• IP Address: 192.168.1.1
• Username: admin
• Password: admin
• WSN NetID (WSN1/WSN2): 2001/2002
• WSN Join Key: JOINADVANTECHIOT

Main Page / System Information

If logging successful, you will see the following page.

Webmin Users

Under Webmin, you can change Username and Password in Webmin Users page.

Back to factory default

Click on Back to Advantech factory default, the value of all the web settings will be back to original setting.

Bootup and Shutdown

In this page, all actions that running in the system are appearing in the table.

Bootup and Shutdown	Description
Start	Start immediately
Stop	Stop immediately
Restart	Restart immediately
Start On Boot	Start when device on boot
Disable On Boot	Disable when device on boot
Start Now and On Boot	Start immediately and start when device on boot
Disable Now and On Boot	Disable immediately and disable when device on boot
Reboot System	Click on this button to immediately reboot the system. All currently logged in users will be disconnected and all services will be re-started.

Firmware Update

Please download the most updated Firmware version from Advantech Website and upload the image into SD card. After plugging the SD card into SD card slot, Firmware update process can be started. Click browse icon to view image file in the SD card.

• Double click “mmcb1p1” folder.

• Select the file with “emmc.img.gz”.

• Click update icon to start firmware update. The firmware update process may take around 5~10 minutes, please don’t turn off the power or press the reset button. After the process completed, please type the default IP address to return to login page.

• Please note, after firmware upgrade, the system will restore its default setting, the IP address will return to 192.168.0.1.

• Note: The device is unavailable during the upgrade process. Any connections to or through the device will be lost.

Running Processes

This page shows all running processes on your system, with child processes indented and displayed below their parent. For each process the PID, owner and command are displayed. Please click Help to get more information.

Network Configuration

In this page, you can set Network Interface, Routing Gateways , Hostname and DNS Client based on your networking environment.

IP

Setting Ethernet IP address.

• Select interface.

• Edit Interface.

Default Gateway

Select interface and input Gateway IP.

DNS

Input DNS servers.

Network Diagnostic

• ping: This command is used for testing network connections.
• traceroute: Use this command to Trace Route to a host.
• nslookup: This command is used to query internet name servers interactively.

WISE Cloud Setting

WISE WSN Setting

There are 2 WSN networks available to be set up in WISE-3310. Each network has it’s default Network ID and JoinKey, both of the 2 settings can be changed in this page.

WISE WSN Setting	Description
Network ID	The network identifier is the identifier of your network. It is set to 2001/2002 by default.
JoinKey	The Joinkey is the password to join the network. It is set to JOINADVANTECHIOT by default.
Save WSN config/Save&Exchange WSN config	Click Save WSN config to apply the new settings to gateway/ Click Save&Exchange WSN config to apply new settings to both gateway and nodes.
Network Statistic	Click Network Statistic to see nodes status and WSN network health report.

• Network Statistic

In Network Statistic page, nodes status and network health can be monitored in the table.

WSN Network Statistic	Description
Net Reliability	Network reliability as a percentage
Net Path Stability	Path stability as a percentage
Net Latency	Average latency, in milliseconds
MAC address	MAC address (EUI-64) of the note.
Mote ID	Short address assigned to this note by the manager, MoteID 1 is always the AP
State	“Lost” = Note is not currently part of the network. “Negotiating” = Note is in the process of joining the network. “Operational” = Note is operational.
Routing	Enable routing function = Yes Disable routing function = No
Reliability	Network reliability as a percentage
Latency (msec)	Average latency, in milliseconds

System Time

Set Time

This form is for changing the system's current time, which is used by all running processes. On operating systems that have a separate hardware clock, it can be used to set that too.

Change time zone

This form allows you to set the system's default time zone, which is used to convert the system time to a human-readable format and offset.

Time server sync

This form is for configuring the system to automatically synchronize the time with a remote server. Synchronization will be done using the Unix time protocol or NTP, depending on which commands are installed and what the remote system supports.

WISE Connection Status

This page shows WISE Connection status.

Connected
Disconnected