Latest revision as of 11:16, 25 February 2019

User Guide for using mfgtool

Download Mfgtools

Yocto 2.1

branch = 4.1.15

git clone -b branch https://github.com/ADVANTECH-Corp/Mfgtools.git

Enter recovery mode

ROM-5420

Set the correct boot mode, then power on.

EBC-RS03

Set the correct boot mode, then power on.

EBC-RM01

Set the correct boot mode, please do not insert the boot SD card. Then power on.

Other Projects

Set eng mode,then power on(1-off,2-on)

Connect the OTG to the PC

After connecting to PC, a HID-compliant device will be shown in the Device

Modify config file

modify cfg.ini

mfgtools/cfg.ini

[profiles]
chip = Linux

[platform]

[LIST]
name = ADV adv-loader & Image

#Projects
imx6q-epcrs200-a1	1G
imx6dl-ebcrs03-a1	1G
imx6dl-ubc220-a1	1G
imx6q-ubc220-a1		1G
imx6q-ebcrb01-a1	1G
imx6q-ebcrs03-a1	2G
imx6qp-rom7421-a1	1G
imx6qp-rom7421-a1	2G
imx6q-rom3420-a1	1G
imx6q-rom3420-a1	2G
imx6q-rom5420-a1	1G
imx6q-rom5420-a1	2G
imx6q-rom5420-b1	1G
imx6dl-rom5420-b1	1G
imx6dl-rom5420-b1	2G
imx6q-rom5420-b1	2G
imx6q-rom7420-a1	1G
imx6q-rom7420-a1	2G
imx6q-rsb4410-a1	1G
imx6q-rsb4410-a2	1G
imx6q-rsb4411-a1	1G
imx6q-epcrs200-a1	1G
imx6q-rsb4411-a1	2G
imx6dl-rom5420-b1	512M
imx6dl-rom7421-a1	1G
imx6dl-rom7421-a1	512M
imx7d-ebcrm01-a1	2G 

[variable]
DDR = 1G
board = imx6q-rsb4411-a1
mmc = 0
image = fsl-image-qt5-imx6qrsb4411-20141218174618.rootfs.sdcard

which operation you want to do

[LIST]
name = 
ADV adv-loader & Image adv-loader & Image
ADV kernel		update zImage and dtb file for i.MX6
ADV u-boot		update u-boot for i.MX6
ADV adv-loader		update adv-loader for i.MX6
ADV Image		update total image for i.MX6
ADV imx7 u-boot		update u-boot for i.MX7
ADV imx7 qspi u-boot	update u-boot to qspi for i.MX7
ADV imx7 kernel		update zImage and dtb file for i.MX7
ADV imx7 Image		update total image for i.MX7

define config variable

[variable]
DDR = (size of memory)
board = (projects name)
mmc = ( “0” means “emmc” ,”1” means “SD Card” .)
image = (If you want to update whole image,fill the image file name )

Copy file

You must copy file to Profiles\Linux\OS Firmware\files\imx6qrsb4411a1-1G\

ADV Image 		fsl-image-qt5-imx6qrsb4411-20141218174618.rootfs.sdcard
ADV kernel		zImage and dtb file
ADV u-boot		u-boot_crc.bin.crc & u-boot_crc.bin
ADV adv-loader		SPL
ADV imx7 u-boot 	u-boot-imx7d-ebcrm01-a1-2G.imx
ADV imx7 qspi u-boot 	u-boot-imx7d-ebcrm01-a1-2G.imx
ADV imx7 kernel 	zImage and dtb file
ADV imx7 Image 		fsl-image-qt5-imx7debcrm01a1-20190102101920.rootfs.sdcard

Running mfgtool and update

running the MfgTool2.exe and update

1. If you can’t running mfgtool2.exe, you can check MfgTool.log
2. Click “Start”,you can get information form debug console

   

3. After update finish,it will be shown below

   

4. Click “Exit” to terminate the application.