Difference between revisions of "Android BSP User Guide for rk3399 series 7.1.2"
Yunjin.jiang (talk | contribs) |
|||
(33 intermediate revisions by 4 users not shown) | |||
Line 1: | Line 1: | ||
+ | |||
== Android BSP Version == | == Android BSP Version == | ||
Line 22: | Line 23: | ||
Step2 In container, change the user. (example) | Step2 In container, change the user. (example) | ||
− | + | | |
<pre> adv@7cc0fa834366:~$ sudo chown adv:adv -R BSP | <pre> adv@7cc0fa834366:~$ sudo chown adv:adv -R BSP | ||
</pre> | </pre> | ||
== Getting Android Source Code == | == Getting Android Source Code == | ||
− | <pre>$ cd ~/ | + | <pre>$ cd ~/BSP |
− | $ sudo git clone https://github.com/ | + | $ sudo git clone https://github.com/ADVANTECH-Rockchip/repo.git |
$ mkdir rk3399_android_n7 | $ mkdir rk3399_android_n7 | ||
$ cd rk3399_android_n7 | $ cd rk3399_android_n7 | ||
$ git config --global user.name "Your Name" | $ git config --global user.name "Your Name" | ||
$ git config --global user.email you@example.com | $ git config --global user.email you@example.com | ||
− | $ ../repo/repo init -u | + | $ ../repo/repo init -u https://AIM-Linux@dev.azure.com/AIM-Linux/RISC-RK3399-Android/_git/android-n7-manifest -b android-7.1.2 -m default.xml |
$ ../repo/repo sync | $ ../repo/repo sync | ||
− | $ ../repo/repo forall -c git checkout -b local --track | + | $ ../repo/repo forall -c git checkout -b local --track advantech-azure/android-7.1.2 |
$ | $ | ||
+ | </pre> | ||
+ | |||
+ | For DeviceOn, please repo following command | ||
+ | <pre>$ ../repo/repo init -u https://AIM-Linux@dev.azure.com/AIM-Linux/RISC-RK3399-Android/_git/android-n7-manifest -b android-7.1.2 -m deviceon.xml | ||
</pre> | </pre> | ||
Line 46: | Line 51: | ||
== Build U-boot == | == Build U-boot == | ||
+ | |||
+ | === Build RSB-4710 U-boot === | ||
<pre>$ cd u-boot | <pre>$ cd u-boot | ||
− | $ make | + | $ make rk3399_rsb4710a2_2G_defconfig |
$ make ARCHV=aarch64 | $ make ARCHV=aarch64 | ||
</pre> | </pre> | ||
+ | |||
+ | === Build ROM-5780 U-boot === | ||
+ | <pre>$ cd u-boot | ||
+ | $ make rk3399_rom5780a3_2G_defconfig | ||
+ | $ make ARCHV=aarch64</pre> | ||
== Build Kernel == | == Build Kernel == | ||
− | === Build | + | === Build RSB-4710 platform === |
<pre>$ cd kernel | <pre>$ cd kernel | ||
$ make ARCH=arm64 rk3399_adv_defconfig -j8 | $ make ARCH=arm64 rk3399_adv_defconfig -j8 | ||
− | $ make ARCH=arm64 rk3399-rsb4710- | + | $ make ARCH=arm64 rk3399-rsb4710-a2.img -j12 |
</pre> | </pre> | ||
+ | |||
+ | === Build ROM-5780 platform === | ||
+ | <pre>$ cd kernel | ||
+ | $ make ARCH=arm64 rk3399_adv_defconfig -j8 | ||
+ | $ make ARCH=arm64 rk3399-rom5780-a3.img -j12</pre> | ||
== Build Android == | == Build Android == | ||
+ | |||
+ | === Build RSB-4710 platform === | ||
<pre>$ source build/envsetup.sh | <pre>$ source build/envsetup.sh | ||
$ lunch rk3399_rsb4710-userdebug | $ lunch rk3399_rsb4710-userdebug | ||
− | $ make -j4 2 | + | $ make -j4 2>&1 | tee build-log.txt |
</pre> | </pre> | ||
+ | |||
+ | === Build ROM-5780 platform === | ||
+ | <pre>$ source build/envsetup.sh | ||
+ | $ lunch rk3399_rom5780-userdebug | ||
+ | $ make -j4 2>&1 | tee build-log.txt</pre> | ||
== Push all image to rockdev folder == | == Push all image to rockdev folder == | ||
Line 69: | Line 93: | ||
</pre> | </pre> | ||
− | All image in rockdev/Image-rk3399_rsb4710 ./mkimage.sh at previous step will repack boot.img and system.img, and copy other related image files to the rockdev/Image- | + | All image in rockdev/Image-rk3399_rsb4710 or rockdev/Image-rk3399_rom5780 ./mkimage.sh at previous step will repack boot.img and system.img, and copy other related image files to the rockdev/Image-project/ directory. The common image files are listed below: |
− | |||
+ | | ||
<pre># boot.img : Android's initramfs, to initialize and mount system partition. | <pre># boot.img : Android's initramfs, to initialize and mount system partition. | ||
# kernel.img : Kernel image. | # kernel.img : Kernel image. | ||
Line 98: | Line 122: | ||
</pre> | </pre> | ||
− | Note : "adv" in rk3399_rsb4710-ota-eng.<span style="color:#FF0000 | + | Note : "adv" in rk3399_rsb4710-ota-eng.<span style="color:#FF0000">adv</span>.zip is the name of your building PC. |
'''<big>Step4 </big>'''Copy the update.zip to SD or USB disk. | '''<big>Step4 </big>'''Copy the update.zip to SD or USB disk. | ||
Line 104: | Line 128: | ||
'''<big>Step5 </big>'''Follow Android update. | '''<big>Step5 </big>'''Follow Android update. | ||
− | == How to | + | == How to update images? == |
There are three ways to update images: | There are three ways to update images: | ||
− | 1. | + | === '''[[1._Using_AndroidToool.|1._Using_AndroidToool.]]''' === |
There is no limitation by this way. | There is no limitation by this way. | ||
− | 2. | + | === '''[[2._Using_storage(such_sd_or_USB_disk)with_update.zip_in_it.|2._Using_storage(such sd_or_USB_disk)with_update.zip_in_it.]]''' === |
There are some limitations: | There are some limitations: | ||
Line 120: | Line 144: | ||
(2)Only update images from the same os, eg : | (2)Only update images from the same os, eg : | ||
− | Android6.0 upgrade to Android6.0 or Android7.1 upgrade to Android7.1. | + | Android6.0 upgrade to Android6.0 or Android7.1 upgrade to Android7.1. |
− | (3)Using update.zip to upgrade. | + | (3)Using update.zip to upgrade. (see more detail in "Create OTA zip" on how to create update.zip) |
− | 3. | + | === '''[[3._Using_bootup_sd_disk_made_by_SDDiskTool.|3._Using_bootup_sd_disk made_by SDDiskTool.]]''' === |
(1)Only update images from the same os, eg : | (1)Only update images from the same os, eg : | ||
− | + | Android6.0 upgrade to Android6.0 or Android7.1 upgrade to Android7.1. | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | (2)Using update.img to upgrade. | |
+ | == DeviceOn == | ||
− | <pre>$ | + | === '''Remount /system partition''' === |
− | $ | + | <pre>$ adb root |
− | + | $ adb remount | |
</pre> | </pre> | ||
− | ''' | + | === '''Modify agent_config.xml''' === |
− | + | There are following tags have to do update at least. | |
− | < | + | <pre><CredentialURL></CredentialURL> |
− | + | <IoTKey></IoTKey> | |
+ | <DeviceName></DeviceName> | ||
+ | <SN></SN> | ||
</pre> | </pre> | ||
− | ''' | + | === '''Update agent_config.xml''' === |
− | <pre>$ ./ | + | <pre>$ adb push agent_config.xml /system/bin/ |
− | + | $ adb push agent_config.xml /system/lib/ | |
</pre> | </pre> | ||
− | + | After update agent_config.xml, please reboot device. | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− |
Latest revision as of 03:24, 28 April 2022
Contents
Android BSP Version
Android 7.1.2
Kernel 4.4.126
Build Environment on Host
Currently, we adopt Docker as build environment.
You can get the latest version of advrisc/u16.04-imx6abv5 Docker image for developing Rockchip RK3399 projects.
Docker command:
docker pull advrisc/u16.04-imx6abv5:20170523
Run Docker example
Step1 Run docker container (example)
$ docker run -it --name android_n7 -v /home/bsp/myandroid:/home/adv/BSP:rw advrisc/u16.04-imx6abv5:20170523 /bin/bash
Step2 In container, change the user. (example)
adv@7cc0fa834366:~$ sudo chown adv:adv -R BSP
Getting Android Source Code
$ cd ~/BSP $ sudo git clone https://github.com/ADVANTECH-Rockchip/repo.git $ mkdir rk3399_android_n7 $ cd rk3399_android_n7 $ git config --global user.name "Your Name" $ git config --global user.email you@example.com $ ../repo/repo init -u https://AIM-Linux@dev.azure.com/AIM-Linux/RISC-RK3399-Android/_git/android-n7-manifest -b android-7.1.2 -m default.xml $ ../repo/repo sync $ ../repo/repo forall -c git checkout -b local --track advantech-azure/android-7.1.2 $
For DeviceOn, please repo following command
$ ../repo/repo init -u https://AIM-Linux@dev.azure.com/AIM-Linux/RISC-RK3399-Android/_git/android-n7-manifest -b android-7.1.2 -m deviceon.xml
Build Instructions
$ export JAVA_HOME=/usr/lib/jvm/java-8-openjdk-amd64 $ export PATH=$JAVA_HOME/bin:$PATH $ export CLASSPATH=.:$JAVA_HOME/lib:$JAVA_HOME/lib/tools.jar
Build U-boot
Build RSB-4710 U-boot
$ cd u-boot $ make rk3399_rsb4710a2_2G_defconfig $ make ARCHV=aarch64
Build ROM-5780 U-boot
$ cd u-boot $ make rk3399_rom5780a3_2G_defconfig $ make ARCHV=aarch64
Build Kernel
Build RSB-4710 platform
$ cd kernel $ make ARCH=arm64 rk3399_adv_defconfig -j8 $ make ARCH=arm64 rk3399-rsb4710-a2.img -j12
Build ROM-5780 platform
$ cd kernel $ make ARCH=arm64 rk3399_adv_defconfig -j8 $ make ARCH=arm64 rk3399-rom5780-a3.img -j12
Build Android
Build RSB-4710 platform
$ source build/envsetup.sh $ lunch rk3399_rsb4710-userdebug $ make -j4 2>&1 | tee build-log.txt
Build ROM-5780 platform
$ source build/envsetup.sh $ lunch rk3399_rom5780-userdebug $ make -j4 2>&1 | tee build-log.txt
Push all image to rockdev folder
$ ./mkimage.sh
All image in rockdev/Image-rk3399_rsb4710 or rockdev/Image-rk3399_rom5780 ./mkimage.sh at previous step will repack boot.img and system.img, and copy other related image files to the rockdev/Image-project/ directory. The common image files are listed below:
# boot.img : Android's initramfs, to initialize and mount system partition. # kernel.img : Kernel image. # misc.img : Misc partition image, to switch boot mode and pass parameter in recovery mode. # recovery.img : Recovery mode image. # resource.img : Resource image, containing boot logo and kernel's device tree info. # system.img : System partition image with ext4 filesystem format. # uboot.img :uboot # trust.img :File about sleep # MiniLoaderAll.bin :Loader
Create OTA zip
Step1 After Build Android, you will be create image for OTA update.
$ ./mkimage.sh ota
Step2 Package the update.zip
$ make otapackage
Step3 Rename the out/target/product/rk3399_rsb4710/rk3399_rsb4710-ota-eng.adv.zip to update.zip
$mv out/target/product/rk3399_rsb4710/rk3399_rsb4710-ota-eng.adv.zip update.zip
Note : "adv" in rk3399_rsb4710-ota-eng.adv.zip is the name of your building PC.
Step4 Copy the update.zip to SD or USB disk.
Step5 Follow Android update.
How to update images?
There are three ways to update images:
1._Using_AndroidToool.
There is no limitation by this way.
2._Using_storage(such sd_or_USB_disk)with_update.zip_in_it.
There are some limitations:
(1)The device must be able to boot up to Android system.
(2)Only update images from the same os, eg :
Android6.0 upgrade to Android6.0 or Android7.1 upgrade to Android7.1.
(3)Using update.zip to upgrade. (see more detail in "Create OTA zip" on how to create update.zip)
3._Using_bootup_sd_disk made_by SDDiskTool.
(1)Only update images from the same os, eg :
Android6.0 upgrade to Android6.0 or Android7.1 upgrade to Android7.1.
(2)Using update.img to upgrade.
DeviceOn
Remount /system partition
$ adb root $ adb remount
Modify agent_config.xml
There are following tags have to do update at least.
<CredentialURL></CredentialURL> <IoTKey></IoTKey> <DeviceName></DeviceName> <SN></SN>
Update agent_config.xml
$ adb push agent_config.xml /system/bin/ $ adb push agent_config.xml /system/lib/
After update agent_config.xml, please reboot device.