Difference between revisions of "UIO-4032TEST"

Latest revision as of 08:41, 27 June 2023

General Specificationn

2 x USB 2.0
2 x 2 wires RS-232
1 x GbE
Dimension: 146 x 31 x 22mm

Environment Specification

Weight: 200g
Operating Humidity: 5 ~ 95% relative humidity, non-condensing
Operating Temperature: -40 ~ 85 C
Storage Temperature: -40 ~ 85 ㆍC and 60 C @ 95% RH Non-Condensing

Ordering Information

P/N	Description
UIO-4032	UIO-4032, 1 GbE, 2 USB, 2 RS-232

Find Other Products

[edit]

RSB-3430
RSB-3720

RS-232 x2 :
Note:ttymxc2 –COM_3 ttymxc3-COM_4

'''$ stty -F /dev/ttymxc2 -echo -onlcr 115200 crtscts
$ cat /dev/ttymxc2 &
$ echo "Serial Port Test" > /dev/ttymxc2

USB

Insert a USB disk

usb 1-1.2: new high-speed USB device number 4 using ci_hdrc
usb-storage 1-1.2:1.0: USB Mass Storage device detected
scsi2 : usb-storage 1-1.2:1.0
scsi 2:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: [sda] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] Attached SCSI removable disk

LAN

ifconfig eth1 8.8.8.8

COM Port
Rear IO – RS-232 x 2
USB x 2
Ethernet x 1
Note:
ttymxc1 – COM3
ttymxc3 – COM4

RS-232(COM3):

# stty -F /dev/ttymxc1 -echo -onlcr 115200
# cat /dev/ttymxc1 &
# echo "Serial Port Test" > /dev/ttymxc1

RS-232(COM3):

# stty -F /dev/ttymxc3 -echo -onlcr 115200
# cat /dev/ttymxc3 &
# echo "Serial Port Test" > /dev/ttymxc3

USB

USB3.0 HUB+USB Keyeboard&Mouse
USB3.0 driver data copy compare

Ethernet

@@ Line 2: / Line 2: @@
 {| border="0" cellpadding="5" cellspacing="0" style="width:100%;"
 |-
-| style="width: 20%;text-align: center;vertical-align: top;" | [[File:RSB-4810.png|RTENOTITLE]]
+| style="width: 20%;text-align: center;vertical-align: top;" | [[File:UIO-4032 290.jpg|RTENOTITLE]]
 | style="width:80%; vertical-align: top;padding-left: 5px;" |
 {| border="0" cellpadding="5" cellspacing="0" style="width:100%;"
 |-
-| style="width:22%;min-width:180px;vertical-align: top;line-height:20px;color: #333333;" |
+| style="width:22%;min-width:250px;vertical-align: top;line-height:20px;color: #333333;" |
 <span style="color: #4e62a1;font-weight: bold;">'''General Specificationn'''</span>
-*<span style="font-size:14px;color:#4d4d4d;line-height:20px;">1 x 2 wires RS-232</span>
+*2 x USB 2.0
-*<span style="font-size:14px;color:#4d4d4d;line-height:20px;">1 xRS-485</span>
+*2 x 2 wires RS-232
-*<span style="font-size:14px;color:#4d4d4d;line-height:20px;">GPIO: 4 DIs and 4 DOs (2.5~24V)</span>
+*1 x GbE
-*<span style="font-size:14px;color:#4d4d4d;line-height:20px;">Dimension: 146 x 31 x 22 mm</span>
+*<span style="font-size:14px;color:#4d4d4d;line-height:20px;">Dimension: </span>146 x 31 x 22mm
 | style="width:78%;vertical-align: top;line-height:20px;" |
 <span style="color: #4e62a1;font-weight: bold;">'''Environment Specification'''</span>
-*<span style="font-size:14px;color:#4d4d4d;line-height:20px;">Weight: 180g</span>
+*<span style="font-size:14px;color:#4d4d4d;line-height:20px;">Weight: </span>200g
-*<span style="font-size:14px;color:#4d4d4d;line-height:20px;">Operating Humidity: 5 ~ 95% relative humidity, non-condensing</span>
+*<span style="font-size:14px;color:#4d4d4d;line-height:20px;">Operating Humidity: </span>5 ~ 95% relative humidity, non-condensing
-*<span style="font-size:14px;color:#4d4d4d;line-height:20px;">Operating Temperature: -40 ~ 85 *C</span>
+*<span style="font-size:14px;color:#4d4d4d;line-height:20px;">Operating Temperature: </span>-40 ~ 85 C
-*<span style="font-size:14px;color:#4d4d4d;line-height:20px;">Storage Temperature: -40 ~ 85 *c and 60 *c @95% RH non-condensing</span>
+*<span style="font-size:14px;color:#4d4d4d;line-height:20px;">Storage Temperature: </span>-40 ~ 85 ㆍC and 60 C @ 95% RH Non-Condensing
 |}
@@ Line 36: / Line 36: @@
 | style="width:85%;vertical-align: top;padding-left:5px;line-height:20px;background-color: rgb(54, 100, 177);color:#ffffff;" | Description
 |-
-| style="vertical-align: top;line-height:20px;;padding-left:5px;background-color: #f7f7f7;" | UIO-4030
+| style="vertical-align: top;line-height:20px;;padding-left:5px;background-color: #f7f7f7;" | UIO-4032
-| style="vertical-align: top;line-height:20px;;padding-left:5px;background-color: #f7f7f7;" | 1x RS232, 4x Dis.
+| style="vertical-align: top;line-height:20px;;padding-left:5px;background-color: #f7f7f7;" | UIO-4032, 1 GbE, 2 USB, 2 RS-232
-x DOs,1x RS-485
 |}
 <p style="text-align: right;padding-right:0px;padding-bottom:10px;padding-top:10px;">[http://ess-wiki.advantech.com.tw/view/AIM-Linux/UIO40-Express <span style="color:#994895;border:solid 1px #994895; padding:10px 20px;text-decoration: none;">Find Other Products</span>]</p>
@@ Line 48: / Line 46: @@
 = RSB-3430 =
-'''&nbsp;Note: RS-232: /dev/ttymxc2&nbsp;<br/> &nbsp;GPIO&nbsp;: need to connect loopback.<br/> &nbsp;RS-485: pin1 data- & pin2 data+ (ttyUSB0)'''
+'''RS-232 x2&nbsp;:&nbsp;<br/> &nbsp;Note:ttymxc2 –COM_3 ttymxc3-COM_4'''
+<pre>'''$ stty -F /dev/ttymxc2 -echo -onlcr 115200 crtscts
-'''RS-232'''
-<pre>$ stty -F /dev/ttymxc2 -echo -onlcr 115200 crtscts
 $ cat /dev/ttymxc2 &
 $ echo "Serial Port Test" > /dev/ttymxc2</pre>
-'''RS485&nbsp;<br/> &nbsp;&nbsp; &nbsp;<br/> Test RS-485 with Adam-4520.'''
+'''USB'''&nbsp;
-<pre>$ stty -F /dev/ttyUSB0 115200
+<pre>Insert a USB disk
-$ echo "Serial Test" > /dev/ttyUSB0</pre>
-'''GPIO&nbsp;'''
+usb 1-1.2: new high-speed USB device number 4 using ci_hdrc
-<pre>[EXTENSION I/O B]
+usb-storage 1-1.2:1.0: USB Mass Storage device detected
-pin#5: gpio 121, pin#6: gpio 122
+scsi2&nbsp;: usb-storage 1-1.2:1.0
-pin#7: gpio 123, pin#8: gpio 124
+scsi 2:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
-pin#9: gpio 125, pin#10: gpio 126
+sd 2:0:0:0: [sda] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB)
-pin#11: gpio 127, pin#12: 133</pre>
+sd 2:0:0:0: [sda] Write Protect is off
+sd 2:0:0:0: [sda] No Caching mode page found
+sd 2:0:0:0: [sda] Assuming drive cache: write through
+sd 2:0:0:0: [sda] No Caching mode page found
+sd 2:0:0:0: [sda] Assuming drive cache: write through
+sda: sda1
+sd 2:0:0:0: [sda] No Caching mode page found
+sd 2:0:0:0: [sda] Assuming drive cache: write through
+sd 2:0:0:0: [sda] Attached SCSI removable disk</pre>
+'''LAN'''
+<pre>ifconfig eth1 8.8.8.8 </pre>
 = RSB-3720 =
-== '''RSB-3720 Testing method (RSB-3720&nbsp;測試方法&nbsp;)''' ==
+COM Port&nbsp;<br/> Rear IO – RS-232 x 2<br/> USB x 2<br/> Ethernet x 1<br/> Note:<br/> ttymxc1 – COM3<br/> ttymxc3 – COM4
 '''RS-232(COM3):'''
 <pre># stty -F /dev/ttymxc1 -echo -onlcr 115200
 # cat /dev/ttymxc1 &
-# echo "Serial Port Test" /dev/ttymxc1</pre>
+# echo "Serial Port Test" > /dev/ttymxc1</pre>
-'''RS-485'''
+[[File:RSB-3720 4032 232 pic1.png|RTENOTITLE]]
-'''Note:&nbsp;'''
+'''RS-232(COM3):'''
+<pre># stty -F /dev/ttymxc3 -echo -onlcr 115200
+# cat /dev/ttymxc3 &
+# echo "Serial Port Test" > /dev/ttymxc3</pre>
-'''Adam-4520<br/> Data-&nbsp;: Pin1<br/> Data+&nbsp;: Pin2<br/> Remember to set up RS-485 before test.'''
+[[File:RSB-3720 4032 232 pic2.png|RTENOTITLE]]
-<pre># stty -F /dev/ttyUSB0 speed 115200 ignbrk -brkint -icrnl -imaxbel -opost -onlcr -isig -icanon -iexten -echo -echoe -echok -echoctl -echoke
-# cat /dev/ttyUSB0 &
-# echo "Serial Test" > /dev/ttyUSB0</pre>
-'''GPIO'''
+'''USB&nbsp;&nbsp;'''
+<pre>USB3.0 HUB+USB Keyeboard&Mouse
+USB3.0 driver data copy compare</pre>
-Note:<br/> input pin#5: gpio 504(DB9-1)<br/> output pin#6: gpio 505(DB9-6)<br/> input pin#7: gpio 506(DB9-2)<br/> output pin#8: gpio 507(DB9-7)<br/> input pin#9: gpio 508(DB9-3)<br/> output pin#10: gpio 509(DB9-8)<br/> input pin#11: gpio 139(DB9-4)<br/> output pin#12: gpio 138(DB9-9)
+'''Ethernet'''&nbsp;
-<pre># echo 504 > /sys/class/gpio/export
-# echo 505 > /sys/class/gpio/export
-# echo out > /sys/class/gpio/gpio2/direction
-# echo in > /sys/class/gpio/gpio1/direction
-# cat /sys/class/gpio/gpio1/value
-# echo 1 > /sys/class/gpio/gpio2/value
-# cat /sys/class/gpio/gpio1/value
-</pre>
-[[File:RSB-3720 GPIOp1.png|RTENOTITLE]]
+[[File:RSB-3720 4032 ethernet pic1.png|RTENOTITLE]]
-<pre># echo 506 > /sys/class/gpio/export
-# echo 507 > /sys/class/gpio/export
-# echo out > /sys/class/gpio/gpio4/direction
-# echo in > /sys/class/gpio/gpio3/direction
-# cat /sys/class/gpio/gpio3/value
-# echo 1 > /sys/class/gpio/gpio4/value
-# cat /sys/class/gpio/gpio3/value</pre>
-[[File:RSB-3720 GPIOp2.png|RTENOTITLE]]
+[[File:RSB-3720 4032 ethernet pic2.png|RTENOTITLE]]
-<pre># echo 508 > /sys/class/gpio/export
-# echo 509 > /sys/class/gpio/export
-# echo out > /sys/class/gpio/gpio6/direction
-# echo in > /sys/class/gpio/gpio5/direction
-# cat /sys/class/gpio/gpio5/value
-# echo 1 > /sys/class/gpio/gpio6/value
-# cat /sys/class/gpio/gpio5/value
-</pre>
-[[File:RSB-3720 GPIOp3.png|RTENOTITLE]]
+&nbsp;
-<pre># echo 139 > /sys/class/gpio/export
-# echo 138 > /sys/class/gpio/export
-# echo out > /sys/class/gpio/gpio8/direction
-# echo in > /sys/class/gpio/gpio7/direction
-# cat /sys/class/gpio/gpio7/value
-# echo 1 > /sys/class/gpio/gpio8/value
-# cat /sys/class/gpio/gpio7/value</pre>
-[[File:RSB-3720 GPIOp4.png|RTENOTITLE]]
+<!--== '''接口布局和尺寸(Layout and Sizes)''' == --><!--'''[[File:UIO-4032 photo1 2021-10-27 143242.jpg|RTENOTITLE]]''' --><!--&#160;
-== <br/> <br/> <br/> <!--[[File:UIO-4030 photo3 2021-10-27 141714.jpg|RTENOTITLE]]--> ==
+<!--'''[[File:UIO-4032 photo2 2021-10-27 143326.jpg|RTENOTITLE]]''' --><!--&#160;--><!--'''[[File:UIO-4032 photo3 2021-10-27 143358.jpg|RTENOTITLE]]'''-->
 <headertabs></headertabs>

Difference between revisions of "UIO-4032TEST"

Latest revision as of 08:41, 27 June 2023

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools