Difference between revisions of "EPC-R5710 Ethernet"
From ESS-WIKI
Xingxing.li (talk | contribs) (Created page with " === '''Ethernet''' === Eth0 : As a router, eth0 is a node that allocates a network to other LAN ports. The interfaces are LAN1 to LAN4 and FIBER up to 1000M. Eth1 :&n...") |
Xingxing.li (talk | contribs) |
||
| Line 2: | Line 2: | ||
=== '''Ethernet''' === | === '''Ethernet''' === | ||
| − | Eth0 : As a router, eth0 is a node that allocates a network to other LAN ports. The interfaces are LAN1 to LAN4 and FIBER up to 1000M. | + | '''Eth0 : As a router, eth0 is a node that allocates a network to other LAN ports. The interfaces are LAN1 to LAN4 and FIBER up to 1000M.''' |
| − | Eth1 : Eth1 is the node of the network receiving port of LAN5. | + | '''Eth1 : Eth1 is the node of the network receiving port of LAN5.''' |
Eth1 Step 1： Check Ethernet device | Eth1 Step 1： Check Ethernet device | ||
| − | [[File:EPC-R5710 Eth1.png]] | + | Step 2 : Connect cable and ping test (eg. Eth1) |
| + | |||
| + | [[File:EPC-R5710 Eth1.png|RTENOTITLE]] | ||
| + | |||
| + | Routing function test: When LAN5 is already connected to an external network, LAN1 to LAN4 and FIBER can connect to other devices for network access. | ||
Latest revision as of 10:08, 7 September 2023
Ethernet
Eth0 : As a router, eth0 is a node that allocates a network to other LAN ports. The interfaces are LAN1 to LAN4 and FIBER up to 1000M.
Eth1 : Eth1 is the node of the network receiving port of LAN5.
Eth1 Step 1： Check Ethernet device
Step 2 : Connect cable and ping test (eg. Eth1)
Routing function test: When LAN5 is already connected to an external network, LAN1 to LAN4 and FIBER can connect to other devices for network access.