Difference between revisions of "RSB-3730 UIO Test"
From ESS-WIKI
Xingxing.li (talk | contribs) |
Xingxing.li (talk | contribs) (→UIO-4034 Function) |
||
(22 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
+ | == '''UIO-4030 Function''' == | ||
− | + | [[File:RSB-3730 UIO-4030 spec.png|500x200px|RSB-3730 UIO-4030 spec.png]][[File:RSB-3730 UIO-4030 specifications.png|500x300px|RSB-3730 UIO-4030 specifications.png]][[File:RSB-3730 UIO CN3 GPIO.png|500x300px|RSB-3730 UIO CN3 GPIO.png]] | |
{| border="1" cellpadding="1" cellspacing="1" style="width: 389px;" | {| border="1" cellpadding="1" cellspacing="1" style="width: 389px;" | ||
Line 45: | Line 46: | ||
|- | |- | ||
| style="width: 190px;" | GPIO_Select | | style="width: 190px;" | GPIO_Select | ||
− | | style="width: 187px;" | LOW (83) | + | | style="width: 187px;" | LOW (83) |
|} | |} | ||
Line 54: | Line 55: | ||
Need one Adam-4520I module for RS-485. | Need one Adam-4520I module for RS-485. | ||
− | + | '''The test method is as follows''' | |
RS-232 U-boot setting: | RS-232 U-boot setting: | ||
− | [[File:RSB-3730 UIO-4030 RS-232 setting.png]] | + | [[File:RSB-3730 UIO-4030 RS-232 setting.png|RTENOTITLE]] |
− | + | === '''RS-232''' === | |
− | === '''RS- | ||
+ | '''COM_3''' | ||
+ | |||
+ | [[File:RSB-3730 UIO-4030 RS-232.png|RTENOTITLE]] | ||
− | |||
− | |||
=== '''GPIO''' === | === '''GPIO''' === | ||
− | + | '''for example:Short GPIO pin1(in) 150 & pin6(out) 141''' | |
− | ''' | ||
<pre># echo 150 > /sys/class/gpio/export | <pre># echo 150 > /sys/class/gpio/export | ||
# echo 141 > /sys/class/gpio/export | # echo 141 > /sys/class/gpio/export | ||
Line 82: | Line 82: | ||
</pre> | </pre> | ||
− | [[File:RSB-3730 UIO-4030 GPIO.png]] | + | [[File:RSB-3730 UIO-4030 GPIO.png|RTENOTITLE]] |
+ | |||
+ | |||
+ | === '''RS-485''' === | ||
+ | |||
+ | '''RS-485 U-boot Setting:''' | ||
+ | |||
+ | [[File:RSB-3730 UIO-4030 RS-485 Setting.png|RTENOTITLE]] | ||
+ | |||
+ | '''RS-485(COM_4):''' | ||
+ | <pre># stty -F /dev/ttyUSB0 speed 115200 ignbrk -brkint -icrnl -imaxbel -opost -onlcr -isig -icanon -iexten -echo -echoe -echok -echoctl -echoke | ||
+ | # cat /dev/ttyUSB0 & | ||
+ | # echo "Serial Test" > /dev/ttyUSB0 | ||
+ | </pre> | ||
+ | |||
+ | [[File:RSB-3730 UIO-4030 RS-485.png|800x400px|RSB-3730 UIO-4030 RS-485.png]] | ||
+ | |||
+ | == '''UIO-4032 Function''' == | ||
+ | |||
+ | [[File:RSB-3730 UIO-4032 spec.png|500x300px|RSB-3730 UIO-4032 spec.png]][[File:RSB-3730 UIO-4032 Specifications.png|500x300px|RSB-3730 UIO-4032 Specifications.png]] | ||
+ | |||
+ | '''Note:''' | ||
+ | |||
+ | RS-232 Device :ttymxc0-COM3, ttymxc3-COM4 | ||
+ | |||
+ | === '''RS-232 x2''' === | ||
+ | |||
+ | '''COM_3''' | ||
+ | <pre># stty -F /dev/ttymxc0 -echo -onlcr 115200 | ||
+ | # cat /dev/ttymxc1 & | ||
+ | # echo "Serial Port Test" > /dev/ttymxc0 | ||
+ | </pre> | ||
+ | |||
+ | [[File:RSB-3730 UIO-4032 RS-232 setting.png|RTENOTITLE]] | ||
+ | |||
+ | '''COM_4''' | ||
+ | |||
+ | [[File:RSB-3730 UIO-4032 RS-232.png|RTENOTITLE]] | ||
+ | |||
+ | === '''USB x2''' === | ||
+ | |||
+ | USB3.0 HUB+USB Keyeboard&Mouse | ||
+ | |||
+ | USB3.0 driver data copy compare | ||
+ | |||
+ | === '''Ethernet''' === | ||
+ | |||
+ | [[File:RSB-3730 UIO-4032 Ethernet.png|RTENOTITLE]] | ||
+ | |||
+ | |||
+ | == '''UIO-4034 Function''' == | ||
+ | |||
+ | [[File:RSB-3730 UIO-4034 spec.png|500x300px|RSB-3730 UIO-4034 spec.png]][[File:RSB-3730 UIO-4034 specifitions.png|500x300px|RSB-3730 UIO-4034 specifitions.png]] | ||
+ | |||
+ | '''Note: RSB-3730 not support UIO-4034 CAN Function.''' | ||
+ | |||
+ | === '''RS-232''' === | ||
+ | |||
+ | '''COM_3''' | ||
+ | <pre># stty -F /dev/ttymxc0 -echo -onlcr 115200 | ||
+ | # cat /dev/ttymxc0 & | ||
+ | # echo "Serial Port Test" > /dev/ttymxc0</pre> | ||
+ | |||
+ | [[File:RSB-3730 UIO-4034 RS232 COM3.png|RTENOTITLE]] | ||
+ | |||
+ | '''COM_4''' | ||
+ | |||
+ | [[File:RSB-3730 UIO-4034 RS232 COM4.png|RTENOTITLE]] | ||
+ | |||
+ | === '''CAN''' === | ||
− | + | '''RSB-3730 not support UIO-4034 CAN Function''' |
Latest revision as of 10:12, 18 July 2024
Contents
UIO-4030 Function
GPIO Pin | Number |
GPIO 1 | 150 |
GPIO 2 | 151 |
GPIO 3 | 152 |
GPIO 4 | 153 |
GPIO 5 | 85 |
GPIO 6 | 141 |
GPIO 7 | 506 |
GPIO 8 | 140 |
GPIO 9 | 511 |
GPIO 10 | 138 |
GPIO 11 | 0 |
GPIO 12 | 97 |
GPIO_Select | LOW (83) |
Note:
Device:ttymxc0 - COM_3, ttyUSB0 - COM_4(RS-485)
Need one Adam-4520I module for RS-485.
The test method is as follows
RS-232 U-boot setting:
RS-232
COM_3
GPIO
for example:Short GPIO pin1(in) 150 & pin6(out) 141
# echo 150 > /sys/class/gpio/export # echo 141 > /sys/class/gpio/export # echo in > /sys/class/gpio/gpio1/direction # echo out > /sys/class/gpio/gpio2/direction # echo 1 > /sys/class/gpio/gpio2/value # cat /sys/class/gpio/gpio1/value 0 # cat /sys/class/gpio/gpio2/value 1
RS-485
RS-485 U-boot Setting:
RS-485(COM_4):
# stty -F /dev/ttyUSB0 speed 115200 ignbrk -brkint -icrnl -imaxbel -opost -onlcr -isig -icanon -iexten -echo -echoe -echok -echoctl -echoke # cat /dev/ttyUSB0 & # echo "Serial Test" > /dev/ttyUSB0
UIO-4032 Function
Note:
RS-232 Device :ttymxc0-COM3, ttymxc3-COM4
RS-232 x2
COM_3
# stty -F /dev/ttymxc0 -echo -onlcr 115200 # cat /dev/ttymxc1 & # echo "Serial Port Test" > /dev/ttymxc0
COM_4
USB x2
USB3.0 HUB+USB Keyeboard&Mouse
USB3.0 driver data copy compare
Ethernet
UIO-4034 Function
Note: RSB-3730 not support UIO-4034 CAN Function.
RS-232
COM_3
# stty -F /dev/ttymxc0 -echo -onlcr 115200 # cat /dev/ttymxc0 & # echo "Serial Port Test" > /dev/ttymxc0
COM_4
CAN
RSB-3730 not support UIO-4034 CAN Function