Difference between revisions of "Audio（ROM-5880）"
From ESS-WIKI
Xingxing.li (talk | contribs) |
Xingxing.li (talk | contribs) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 13: | Line 13: | ||
=== '''Step 2：Audio codec''' === | === '''Step 2：Audio codec''' === | ||
| + | |||
| + | 1. Get sound card ID. | ||
| + | <pre># cat /proc/asound/cards | ||
| + | 0 [rockchiphdmi ]: rockchip_hdmi - rockchip,hdmi | ||
| + | rockchip,hdmi | ||
| + | 1 [rockchiprt5640c]: rockchip_rt5640 - rockchip,rt5640-codec | ||
| + | rockchip,rt5640-codec</pre> | ||
| + | |||
| + | 2. Record（0/1->rt5640-codec） | ||
| + | |||
| + | Take Card ID 1 for example： | ||
| + | <pre># arecord -Dplughw:1,0 -f S16_LE -r 16000 -d 10 -t wav test.wav</pre> | ||
| + | |||
| + | 3. Playback | ||
| + | |||
| + | Take Card ID 1 for example： | ||
| + | <pre># aplay -Dplughw:1,0 -t wav test.wav</pre> | ||
Latest revision as of 03:45, 5 December 2023
ROM-5880 supports 2 sound cards: 0 hdmi (with Audio), 1 rt5640-codec. (Connect Audio boardROM-EG57 on CN17 of SOM-DB2510 carrier board, set SW3 to 2.)
Step 1：HDMI
Set the default audio output when playing media files, if it supports audio.
1. Entry start->Sound & Video->PulseAudio Volume Control.
2. Select “Build-in Audio stereo” for HDMI output or Select “Build-in Audio Speaker …” for rt5640-codec output.
Step 2：Audio codec
1. Get sound card ID.
# cat /proc/asound/cards 0 [rockchiphdmi ]: rockchip_hdmi - rockchip,hdmi rockchip,hdmi 1 [rockchiprt5640c]: rockchip_rt5640 - rockchip,rt5640-codec rockchip,rt5640-codec
2. Record（0/1->rt5640-codec）
Take Card ID 1 for example：
# arecord -Dplughw:1,0 -f S16_LE -r 16000 -d 10 -t wav test.wav
3. Playback
Take Card ID 1 for example：
# aplay -Dplughw:1,0 -t wav test.wav