Difference between revisions of "RSB-4810 Debian11 user guide"
Xingxing.li (talk | contribs) |
Xingxing.li (talk | contribs) |
||
(6 intermediate revisions by the same user not shown) | |||
Line 160: | Line 160: | ||
== '''快速入门 (Quick Start)''' == | == '''快速入门 (Quick Start)''' == | ||
+ | |||
+ | |||
=== '''系统下载 (OS Download)''' === | === '''系统下载 (OS Download)''' === | ||
− | {| border="2 | + | Note: LIV=Yocto Linux, UIV=Ubuntu, DIV=Debian, AIV=Android |
+ | |||
+ | LBV=BSP, LIV=Image | ||
+ | |||
+ | {| border="2" | ||
|- | |- | ||
− | + | | '''Platform''' | |
− | + | | '''Product''' | |
− | + | | '''Image Version''' | |
− | + | | '''Release Date''' | |
− | + | | '''Release Version''' | |
− | + | | '''Release notes''' | |
− | + | | '''Image Download''' | |
− | + | | '''BSP Download Tag''' | |
− | | | + | | '''SDK''' |
+ | | '''Comment''' | ||
+ | | '''CAN2.0 Patch''' | ||
|- | |- | ||
− | | colspan="1" rowspan="1 | + | | colspan="1" rowspan="1" | RK3568 |
− | | colspan="1" rowspan="1 | + | | colspan="1" rowspan="1" | RSB-4810 |
− | + | | DIV130311 | |
− | + | | 2024/03/15 | |
− | + | | Beta | |
− | | | + | | [https://ess-wiki.advantech.com.tw/view/RSB-4810_Debian11_Release_notes Release note] |
− | + | | | |
− | [https://pan.baidu.com/s/1NYKJtOkZHxANfcTgJz47ZA?pwd=a887 Baidu] Password:a887 | + | [https://pan.baidu.com/s/1NYKJtOkZHxANfcTgJz47ZA?pwd=a887 Baidu] Password:a887 |
[https://www.dropbox.com/scl/fo/dv9hbpbv2ba933zzg8xha/h?rlkey=ddiohitzm65m9sb4d8u292wlh&dl=0 Dropbox] | [https://www.dropbox.com/scl/fo/dv9hbpbv2ba933zzg8xha/h?rlkey=ddiohitzm65m9sb4d8u292wlh&dl=0 Dropbox] | ||
− | + | | RK3568_RISC_DIV130311.xml | |
− | | | + | | |
+ | [https://pan.baidu.com/s/1CYEgQZLVzZTWhsRd1qMIrQ?pwd=a887 Baidu] Password:a887 | ||
+ | |||
+ | Dropbox | ||
+ | |||
+ | | | ||
+ | [https://ess-wiki.advantech.com.tw/wiki/images/c/ca/RSB4810A2AIM20DIV130311_2024-03-15_test_report.xlsx Test Report] | ||
+ | |||
+ | '''[https://pan.baidu.com/s/1WeQwXmE409gA4vJxhRqusg?pwd=a887 CAN2.0 Errata ] '''提取码:a887 | ||
+ | |||
+ | | [https://pan.baidu.com/s/1fmaL9eIqDdqd5h4FeXcXdw?pwd=a887 Baidu] Password:a887 | ||
|} | |} | ||
+ | |||
+ | *Alpha: Basic I/O function bring up by RD; | ||
+ | |||
+ | *Beta: Basic I/O function、performance and middleware verified by RD. Peripherals integrated; | ||
+ | |||
+ | *GA: Beta version by QE verification; | ||
+ | |||
+ | *RTM: Beta version by SI/Power/QE verification and pre-loaded; | ||
=== '''How to update images .''' === | === '''How to update images .''' === | ||
Line 201: | Line 227: | ||
==== '''[[4._RSB-4810_Debian_U-boot_update_image.|U-boot update image.]] '''(TBD) ==== | ==== '''[[4._RSB-4810_Debian_U-boot_update_image.|U-boot update image.]] '''(TBD) ==== | ||
+ | |||
== '''Linux系统的基本使用(Linux System Basic Operating Method)''' == | == '''Linux系统的基本使用(Linux System Basic Operating Method)''' == | ||
Line 237: | Line 264: | ||
| | ||
+ | |||
+ | |||
+ | |||
+ | |||
=== '''CAN2.0 測試( CAN Test method) ''' === | === '''CAN2.0 測試( CAN Test method) ''' === | ||
− | + | '''Note:RK3568 CAN2.0 Errata; ''' | |
− | + | ||
+ | '''CAN2.0 Errata:[https://pan.baidu.com/s/1WeQwXmE409gA4vJxhRqusg?pwd=a887 CAN2.0 Errata ] '''提取码:a887 | ||
+ | |||
+ | '''CAN2.0 Patch:'''[https://pan.baidu.com/s/19A7ZRUGwPS7Ao3ngN-5sDw?pwd=a887 Baidu] Password:a887 | ||
+ | |||
+ | Short CAN1/2 Pin header ,Loopback test for example: | ||
+ | |||
+ | CAN0_D+->CAN1_D+ | ||
+ | |||
+ | CAN0_D-->CAN1_D- | ||
+ | [[File:RSB-4810 CAN2.0 Connector.png|RTENOTITLE]] | ||
− | + | '''输入指令:''' | |
+ | <pre># ip link set can0 down | ||
+ | # ip link set can0 type can bitrate 1000000 | ||
+ | # ip link set can0 up | ||
+ | # ip -details link show can0 | ||
+ | # candump can0 & | ||
+ | # ip link set can1 down | ||
+ | # ip link set can1 type can bitrate 1000000 | ||
+ | # ip link set can1 up | ||
+ | # ip -details link show can1 | ||
+ | # cansend can1 123#55 | ||
+ | can0 123 [1] 55 | ||
+ | </pre> | ||
− | + | [[File:RSB-4810 Debain11 CAN2.0.png|RTENOTITLE]] | |
=== '''I2C 測試( I2C Test method) ''' === | === '''I2C 測試( I2C Test method) ''' === |
Latest revision as of 07:20, 24 June 2024
Contents
- 1 产品介绍(product presentation)
- 2 硬件接口说明
- 3 快速入门 (Quick Start)
- 4 Linux系统的基本使用(Linux System Basic Operating Method)
- 4.1 乙太網路使用方法(Ethernent Testing Method)
- 4.2 WiFi使用方法(WIFI Testing Method)
- 4.3 4G使用方法(4G Testing Method)
- 4.4 蓝牙使用方法(BlueTooth Operating Method)
- 4.5 音訊使用方法(BlueTooth Operating Method)
- 4.6 CAN2.0 測試( CAN Test method)
- 4.7 I2C 測試( I2C Test method)
- 4.8 看門狗測試 (Watch Dog Test method)
- 4.9 UART測試 (UART Test method)
- 4.10 GPIO測試(GPIO Test method)
- 4.11 Display測試(Display Test method)
- 4.12 遠程訪問及文件傳輸(Remote Access and File Transimmion)
- 5 通用方法(General Method)
- 6 How to build Debian 11 BSP (Debian 11 BSP 編譯)
产品介绍(product presentation)
产品特性(product feature)
- Rockchip RK3568 Arm Quad Cortex-A55, up to 2.0GHz
- Built-in NPU with processing performance of up to 0.8 TOPS
- Onboard 2/4GB LPDDR4 memory and 16/32GB eMMC
- Supports 1 x HDMI 2.0 4K, 1 x LVDS/MIPI-DSI, and 1 x eDP
- Supports 4K H.264/H.265 video decoder
- Provides 2 x GbE, 1 x SATA 3.0, 6 x UART, 2 x USB 3.0, 2 x USB 2.0, 1 x USB OTG, and 2 x CAN FD
- Provides a M.2 E Key with PCIE 3.0/USB 2.0/SDIO/UART signal for Wi-Fi 5/6 Modules, and a MINI-PCIE with PCIE 3.0/USB 2.0 signal for LTE/5G Modules
- Supports Linux and Android OS
产品官网链接(Product official website link)
RSB-4810 - Rockchip Arm Cortex-A55 RK3568 3.5" SBC - Advantech
硬件接口说明
接口布局圖 Board Layout
接口尺寸 Board Dimension
接口引脚定義 (Pin definitions)
Jumper List | |
J1 |
MASKROM mode select Short pin 12 and power on the RSB-4810 to enter MASKROM mode. Change back to pin 23 before click "Run" to flash image |
J2 | CAN impedance matching |
J3 | CAN impedance matching |
J4 | OTG Mode selection, default USB3.0 host |
SW1 | AT & ATX Mode Switch, default AT mode |
BLP1 | LVDS BKL PWR 3.3V&5V level select, default 5V |
BLP2 | LVDS BKL PWR 12V select |
VDD1 | EDP VDD 3.3V &5V level select, default 3.3V |
VDD2 | LVDS VDD 3.3V & 5V level select, default 3.3V |
J5 | COM5,COM6 power 12/5V level select, default 5V |
List
AUDIO | Audio pin header (Headphone, Mic in, Speaker) |
EDP | eDP CONN |
LVDS | LVDS CONN |
BL | LVDS Back light Control |
SATA | SATA3.0 |
MINIPCIE | MINI PCIe 52P |
SIM | Nano SIM card |
M2 | M.2 E-Key CONN |
SD | Micro SD slot |
PWRBTN | Power button and LED |
DCIN1 | 12V DC jack |
COM1 | RS-232 pin header |
COM2 | RS-232 DB9 |
HDMI | HDMI CONN |
CAN1/2 | CAN FD CONN |
USB1/2 | USB pin header |
USB3/4 | USB Type A ((2 x USB3.0, the lower Type A connector can be configured to OTG by jumper setting)) |
SATAP | SATA Power |
LAN1 | LAN1 |
LAN2 | LAN2 |
BAT | RTC CONN |
COM3/4 | COM3 and COM4 with RS-232 or RS-485 |
COM5/6 | COM5 and COM6 with RS-232 |
RST | Reset button |
CN1 | GPIO CONN |
I2C1 | I2C pin header |
Debug port | Debug connector |
快速入门 (Quick Start)
系统下载 (OS Download)
Note: LIV=Yocto Linux, UIV=Ubuntu, DIV=Debian, AIV=Android
LBV=BSP, LIV=Image
Platform | Product | Image Version | Release Date | Release Version | Release notes | Image Download | BSP Download Tag | SDK | Comment | CAN2.0 Patch |
RK3568 | RSB-4810 | DIV130311 | 2024/03/15 | Beta | Release note |
Baidu Password:a887 |
RK3568_RISC_DIV130311.xml |
Baidu Password:a887 Dropbox |
CAN2.0 Errata 提取码:a887 |
Baidu Password:a887 |
- Alpha: Basic I/O function bring up by RD;
- Beta: Basic I/O function、performance and middleware verified by RD. Peripherals integrated;
- GA: Beta version by QE verification;
- RTM: Beta version by SI/Power/QE verification and pre-loaded;
How to update images .
There are three ways to update images:
Usering_RKTool.
SD_update image.
OS_update image. (TBD)
U-boot update image. (TBD)
Linux系统的基本使用(Linux System Basic Operating Method)
乙太網路使用方法(Ethernent Testing Method)
Command : ifconfig
WiFi使用方法(WIFI Testing Method)
4G使用方法(4G Testing Method)
蓝牙使用方法(BlueTooth Operating Method)
音訊使用方法(BlueTooth Operating Method)
CAN2.0 測試( CAN Test method)
Note:RK3568 CAN2.0 Errata;
CAN2.0 Errata:CAN2.0 Errata 提取码:a887
CAN2.0 Patch:Baidu Password:a887
Short CAN1/2 Pin header ,Loopback test for example:
CAN0_D+->CAN1_D+
CAN0_D-->CAN1_D-
输入指令:
# ip link set can0 down # ip link set can0 type can bitrate 1000000 # ip link set can0 up # ip -details link show can0 # candump can0 & # ip link set can1 down # ip link set can1 type can bitrate 1000000 # ip link set can1 up # ip -details link show can1 # cansend can1 123#55 can0 123 [1] 55
I2C 測試( I2C Test method)
看門狗測試 (Watch Dog Test method)
UART測試 (UART Test method)
How to Configure RS-232/485 Mode Enter U-boot interrupt mode. Connect the device to the debug port and open the debug console. Press “ctrl + c” before powering on the device.
The following information should be displayed on the debug console:
Hit any key to stop autoboot: 0
=>
=>
Then input the following command to configure the UART mode.
RS-485 Mode:
setenv uart_mode 0x0c
saveenv
reset
RS-232 Mode:
setenv uart_mode 0x00
saveenv
reset
Note: The default value is RS-232. Cp210x supports four ports, but for RSB-4810 only ttyUSB2 and ttyUSB3 support RS-485 mode.
In the above command “setenv uart_mode 0x0c”, 0x0c means set bit2(ttyUSB2) and bit3(ttyUSB3) to 1 (0 means to RS-232; 1 means to RS-485). To configure just ttyUSB2 (or ttyUSB3) to RS-485 mode, change 0x0c to 0x04 (or 0x08).
GPIO測試(GPIO Test method)
Display測試(Display Test method)
How_to_Config_Multi-Display
遠程訪問及文件傳輸(Remote Access and File Transimmion)
查看主板IP位址 ( Chech IP Address ):
ID: root password:123456
通用方法(General Method)
查看CPU温度(Check CPU Temperature)
# cat /sys/devices/virtual/thermal/thermal_zone0/temp 40000
或者直接以度爲單位顯示 echo $[$(cat /sys/class/thermal/thermal_zone0/temp)/1000]° >>> 40°
查看CPU频率(Check CPU Frequency)
cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
>> 1200000
cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq
>> 1800000
查看内存容量(Check Memory Capacity)
# busybox free -m
查看存储容量(Check Storage Capacity)
# busybox df -h
調整亮度(Change the backlight)
Note: connect with LVDS Panel , default value is 200
root@linaro-alip:~# echo 100 > /sys/class/backlight/backlight/brightness
root@linaro-alip:~# echo 200 > /sys/class/backlight/backlight/brightness
root@linaro-alip:~#
root@linaro-alip:~# cat /sys/class/backlight/backlight/max_brightness
255
root@linaro-alip:~# cat /sys/class/backlight/backlight/brightness
200