Difference between revisions of "MIO-5355 Yocto user guide"
From ESS-WIKI
(→Swtich / Jumper Settings) |
|||
| (12 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | == {{DISPLAYTITLE: | + | == {{DISPLAYTITLE:MIO-5355 Yocto user guide}}'''產品介紹(Product introduction )''' == |
=== '''產品特性(Product Features)''' === | === '''產品特性(Product Features)''' === | ||
| − | * | + | *Qualcomm® QCS6490/QCS5430 on 3.5" SBC, support extend operating temperature -20~70°C |
| − | * | + | *Powerful but Low Power with 8x Kryo 670 CPU from 1.9 up to 2.7 GHz + Adreno GPU 643 + up to 12.3 TOPs iNPU |
| − | + | *Rugged Design with On-board 8GB LPDDR5 and 128GB UFS or eMMC | |
| − | * | + | *Flexible Displays with HDMI and LVDS or eDP & Rich I/Os: 2x GbE, 6x USB, 4x COM, 2x MIPI-CSI, 1x Audio |
| − | * | + | *3x M.2 Expansions: M.2 E-Key 2230 for WiFi/BT, M.2 B-Key 3052 for 4G/LTE, M.2 B-Key 2280 for NVMe Storage |
| − | + | *Various OS Support: Yocto, Windows on Arm and Ubuntu | |
| − | *Support Windows | ||
| | ||
| Line 16: | Line 15: | ||
=== '''產品官網連結(Product official website link)''' === | === '''產品官網連結(Product official website link)''' === | ||
| − | [https://www.advantech.com/zh-tw/products/ | + | [https://www.advantech.com/zh-tw/products/7978f26b-5c2e-4118-8e67-ae09ca11fc27/mio-5355/mod_c8a58934-6b0a-4728-ac3e-df35a296c4f1 '''MIO-5355'''] |
| | ||
| Line 22: | Line 21: | ||
== '''硬件接口說明(Hardware interface introduction)''' == | == '''硬件接口說明(Hardware interface introduction)''' == | ||
| − | === ''' | + | === '''接口布局(Layout)''' === |
| − | '''[[File: | + | '''[[File:Mio-5355 top.jpg|TOPSIDE]]''' |
| − | '''[[File: | + | '''[[File:Mio-5355 bottom.jpg|BOTTOMSIDE]]''' |
| − | ''' | + | === '''Swtich / Jumper Settings''' === |
| − | + | | |
| − | + | '''SW1''' | |
| − | | + | *SW1 ( 1-on ) : USB EDL Mode (Forced Recovery) |
| + | *SW1 ( 1-off ) : Normal Boot | ||
| + | *SW1 ( 2-on ) : AT Mode | ||
| + | *SW1 ( 2-off ) : ATX Mode | ||
| + | *SW1 ( 3-on ) : UFS | ||
| + | *SW1 ( 3-off ) : EMMC | ||
| + | *SW1 ( 4-on ) : LVDS (DVT Support) | ||
| + | *SW1 ( 4-off ) : eDP (DVT Support) | ||
| − | ''' | + | '''SW2''' |
| − | + | *LVDS Resolution setting | |
| − | + | '''[[File:Mio-5355 LVDS Resolution.jpg|LVDS_Resolution]]''' | |
| − | + | '''SW3''' | |
| − | + | *SW3 ( 1-on ) : COM1 TERM RX Eable | |
| − | + | *SW3 ( 1-off ) : COM1 TERM RX Disable | |
| − | + | *SW3 ( 2-on ) : COM2 TERM RX Eable | |
| − | + | *SW3 ( 2-off ) : COM2 TERM RX Disable | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | '''VDD1''' | |
| − | + | *VDD1 ( Select 1,3 ): 3.3V | |
| + | *VDD1 ( Select 3,5 ): 5V | ||
| + | *VDD1 ( Select 3,4 ): 12V | ||
=== '''系统下载 (OS Download)''' === | === '''系统下载 (OS Download)''' === | ||
| Line 59: | Line 63: | ||
'''Yocto 4.0 : ''' | '''Yocto 4.0 : ''' | ||
| − | + | [https://www.dropbox.com/scl/fo/tptbp080ohgckjdbr3vrq/AFLPSjOpHbpN6_IfFaoksO0/officialbuild/risc_qcs_linux_yocto_00041.0/2025-10-14?rlkey=647rksjn60zyqj4i134tflsuj&e=2&subfolder_nav_tracking=1&st=kixrspiq&dl=0 2025-10-14] | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | == ''' | + | == '''燒錄方法 (Recovery & Rescue method)''' == |
'''1. Download the Qualcomm Software Center ''' | '''1. Download the Qualcomm Software Center ''' | ||
| Line 112: | Line 106: | ||
'''12. Unzip the UFS File and eMMC File ''' | '''12. Unzip the UFS File and eMMC File ''' | ||
| − | |||
| − | |||
'''For example : ''' | '''For example : ''' | ||
| − | ''' | + | ''' mio5355a1_yocto4.0.18-le1.1_v2.0.0_kernel-6.6.28_qcs6490_8g_emmc_2025-10-14.tgz ''' |
| − | ''' | + | ''' mio5355a1_yocto4.0.18-le1.1_v2.0.0_kernel-6.6.28_qcs6490_8g_ufs_2025-10-14.tgz ''' |
'''13 Connect your device via Micro USB.''' | '''13 Connect your device via Micro USB.''' | ||
| − | ''' | + | '''14. if your pc can not identify the USB , please download the "'Qualcomm USB Driver" ''' |
| − | ''' | + | '''15. Search " Qualcomm USB Driver " ''in the search bar , then install the driver. ''''' |
[[File:ROM-2860 search bar usb driver.PNG|RTENOTITLE]] | [[File:ROM-2860 search bar usb driver.PNG|RTENOTITLE]] | ||
| − | === '''<u> | + | === '''<u>Flash UFS</u>''' === |
| − | ''' | + | '''For confirmation, we will erase the partition before UFS installation. ''' |
| − | ''' | + | ''' 1. Change the SW1''' |
| − | + | '''<span style="background-color:#ffff00;"> Flash UFS: the SW1 switch to 1-on, 3-on</span>''' | |
| − | ''' | + | ''' 2. Turn on the power ''' |
| − | + | ''' 3. Open " PCATApp" Tool ''' | |
| − | ''' | + | ''' 4. Select "Qualcomm HS-USB QDLoader 9008" and click connect''' |
| − | [[File: | + | [[File:MIO-5355 Connect.jpg|Connect]] |
| − | ''' | + | '''5. When you connected successfully , it will show "green word" - Qualcomm HS-USB QDLoader 9008 (COM 11) ''' |
| − | [[File: | + | [[File:MIO-5355 Connected.png|Connected]] |
| − | + | '''6. Select UFS Folder in PCAT Tool , the Tool will help load Files automatically and Select "MEMORY_TYPE_UFS" ''' | |
| − | + | [[File:MIO-5355 Select.PNG|Select]] | |
| − | ''' | + | '''7. Select provision button [[File:ROM-2860 provision file button.PNG|RTENOTITLE]] ''' |
| − | + | [[File:ROM-2860 provision file icon yocto.PNG|RTENOTITLE]] | |
| − | ''' | + | '''8. Add the prog_firehose_ddr.elf and provision_ufs31.xml in UFS folder. ''' |
| − | + | [[File:MIO-5355 UFSPROVISION.jpg|UFSPROVISION]] | |
| − | + | '''9. Then press "OK" , it will start to do USF Provision. ''' | |
| − | + | [[File:ROM-2860 provision file running.PNG|RTENOTITLE]] | |
| − | + | '''10. When the Provision finished , you can see the result in message window. ''' | |
| − | + | [[File:ROM-2860 provision log yocto.PNG|RTENOTITLE]] | |
| − | |||
| − | [[File:ROM-2860 | ||
| − | |||
| − | |||
| − | + | '''11. Click " Download" ''' | |
| − | + | [[File:MIO-5355 ufs download.png|UFS_DOWNLOAD]] | |
| − | + | '''12. UFS Donwload ''''''completed''' | |
| − | + | [[File:MIO-5355 ufs finished.png|ufs_finished]] | |
| − | + | '''12. When you finish the download process , please change the switch.''' | |
| − | ''' | + | ''' Flash UFS: the SW1 <span style="background-color:#ffff00;">switch to 1-off</span>''' |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| | ||
| Line 201: | Line 179: | ||
'''1. Turn off the Power ''' | '''1. Turn off the Power ''' | ||
| − | ''' | + | '''2. Change the SW1 ''' |
| − | '''<span style="background-color:#ffff00;"> Flash eMMC: the SW1 switch to 1 | + | '''<span style="background-color:#ffff00;"> Flash eMMC: the SW1 switch to 1-on, 3-off </span>''' |
'''3. Turn on the power ''' | '''3. Turn on the power ''' | ||
| Line 211: | Line 189: | ||
'''5. If the device disconnect with PCAT Tool , please connect it again. ''' | '''5. If the device disconnect with PCAT Tool , please connect it again. ''' | ||
| − | [[File: | + | [[File:MIO-5355 Connect.jpg|Connect]] |
| | ||
| − | '''6. Select | + | '''6. Select EMMC Folder in PCAT Tool, the Tool will help load Files automatically and Select "MEMORY_TYPE_EMMC"''' |
| − | [[File: | + | [[File:MIO-5355 EMMC Select.png|EMMC_Select]] |
'''7. Make sure the setting ,then press " Download " button.''' | '''7. Make sure the setting ,then press " Download " button.''' | ||
| − | [[File: | + | [[File:MIO-5355 EMMC Flash.png|EMMC_Flash]] |
| − | ''' | + | '''8. eMMC Donwload ''''''completed''' |
| − | [[File: | + | [[File:MIO-5355_EMMC_Finished.png|EMMC_Finished]] |
| − | |||
| − | |||
| − | |||
| − | |||
'''10. When the eMMC installation finished . Close the PCAT tool ,''' | '''10. When the eMMC installation finished . Close the PCAT tool ,''' | ||
| Line 235: | Line 209: | ||
'''11 ''''''Please''' '''remove the mirco usb cable, turn off the power ''' | '''11 ''''''Please''' '''remove the mirco usb cable, turn off the power ''' | ||
| − | '''12.''' '''eMMC boot up : SW1 switch to 1-off | + | '''12.''' '''eMMC boot up : SW1 switch to 1-off ''' |
'''13. Connect debug cable and open the terminal , turn on the power . ''' | '''13. Connect debug cable and open the terminal , turn on the power . ''' | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| | ||
| − | == '''Linux | + | == '''Linux BSP編譯方法(Linux BSP Compile Method) ''' == |
| − | |||
| − | |||
| − | [https://ess-wiki.advantech.com.tw/view/AIM-Linux/BSP/Qualcomm/RISC_QCS_Yocto_LE1. | + | [https://ess-wiki.advantech.com.tw/view/AIM-Linux/BSP/Qualcomm/RISC_QCS_Yocto_LE1.1_MIO-5355 '''Yocto 4.0(LE 1.1)'''] |
| | ||
| − | + | == '''基本功能測試(Basic Function test) ''' == | |
| − | |||
| − | |||
| − | + | [https://ess-kms.edgecenter.io/en/aimlinux/public/ECG/MIO-5355_LE_SW_User_Manual Test SOP] | |
Latest revision as of 08:47, 28 November 2025
Contents
產品介紹(Product introduction )
產品特性(Product Features)
- Qualcomm® QCS6490/QCS5430 on 3.5" SBC, support extend operating temperature -20~70°C
- Powerful but Low Power with 8x Kryo 670 CPU from 1.9 up to 2.7 GHz + Adreno GPU 643 + up to 12.3 TOPs iNPU
- Rugged Design with On-board 8GB LPDDR5 and 128GB UFS or eMMC
- Flexible Displays with HDMI and LVDS or eDP & Rich I/Os: 2x GbE, 6x USB, 4x COM, 2x MIPI-CSI, 1x Audio
- 3x M.2 Expansions: M.2 E-Key 2230 for WiFi/BT, M.2 B-Key 3052 for 4G/LTE, M.2 B-Key 2280 for NVMe Storage
- Various OS Support: Yocto, Windows on Arm and Ubuntu
產品官網連結(Product official website link)
硬件接口說明(Hardware interface introduction)
接口布局(Layout)
Swtich / Jumper Settings
SW1
- SW1 ( 1-on ) : USB EDL Mode (Forced Recovery)
- SW1 ( 1-off ) : Normal Boot
- SW1 ( 2-on ) : AT Mode
- SW1 ( 2-off ) : ATX Mode
- SW1 ( 3-on ) : UFS
- SW1 ( 3-off ) : EMMC
- SW1 ( 4-on ) : LVDS (DVT Support)
- SW1 ( 4-off ) : eDP (DVT Support)
SW2
- LVDS Resolution setting
SW3
- SW3 ( 1-on ) : COM1 TERM RX Eable
- SW3 ( 1-off ) : COM1 TERM RX Disable
- SW3 ( 2-on ) : COM2 TERM RX Eable
- SW3 ( 2-off ) : COM2 TERM RX Disable
VDD1
- VDD1 ( Select 1,3 ): 3.3V
- VDD1 ( Select 3,5 ): 5V
- VDD1 ( Select 3,4 ): 12V
系统下载 (OS Download)
Yocto 4.0 :
燒錄方法 (Recovery & Rescue method)
1. Download the Qualcomm Software Center
2. Open the Qualcomm Software Center
3. Search "PCAT" in the search bar
4. Click Qualcomm® Product Configuration Assistant Tool
5. Select Qualcomm® Product Configuration Assistant Tool version
Version: 2.33.2.119
6. Install Qualcomm® Product Configuration Assistant Tool 2.33.2.119
7. Search "QUTS" in the search bar
8. Click the Qualcomm® Unified Tools Services
9. Select Qualcomm® Unified Tools Services version
Version : 1.75.2.9
10. Install Qualcomm® Unified Tools Services 1.75.2.9
11. You will find the new application in your Windows system .
12. Unzip the UFS File and eMMC File
For example :
mio5355a1_yocto4.0.18-le1.1_v2.0.0_kernel-6.6.28_qcs6490_8g_emmc_2025-10-14.tgz
mio5355a1_yocto4.0.18-le1.1_v2.0.0_kernel-6.6.28_qcs6490_8g_ufs_2025-10-14.tgz
13 Connect your device via Micro USB.
14. if your pc can not identify the USB , please download the "'Qualcomm USB Driver"
15. Search " Qualcomm USB Driver " in the search bar , then install the driver.
Flash UFS
For confirmation, we will erase the partition before UFS installation.
1. Change the SW1
Flash UFS: the SW1 switch to 1-on, 3-on
2. Turn on the power
3. Open " PCATApp" Tool
4. Select "Qualcomm HS-USB QDLoader 9008" and click connect
5. When you connected successfully , it will show "green word" - Qualcomm HS-USB QDLoader 9008 (COM 11)
6. Select UFS Folder in PCAT Tool , the Tool will help load Files automatically and Select "MEMORY_TYPE_UFS"
7. Select provision button 
8. Add the prog_firehose_ddr.elf and provision_ufs31.xml in UFS folder.
9. Then press "OK" , it will start to do USF Provision.
10. When the Provision finished , you can see the result in message window.
11. Click " Download"
'12. UFS Donwload 'completed
12. When you finish the download process , please change the switch.
Flash UFS: the SW1 switch to 1-off
Flash eMMC
1. Turn off the Power
2. Change the SW1
Flash eMMC: the SW1 switch to 1-on, 3-off
3. Turn on the power
4. Make sure the device connection status.
5. If the device disconnect with PCAT Tool , please connect it again.
6. Select EMMC Folder in PCAT Tool, the Tool will help load Files automatically and Select "MEMORY_TYPE_EMMC"
7. Make sure the setting ,then press " Download " button.
'8. eMMC Donwload 'completed
10. When the eMMC installation finished . Close the PCAT tool ,
'11 'Please remove the mirco usb cable, turn off the power
12. eMMC boot up : SW1 switch to 1-off
13. Connect debug cable and open the terminal , turn on the power .
Linux BSP編譯方法(Linux BSP Compile Method)