Latest revision as of 04:40, 7 March 2017

Android Image Downloads

${BOARD} : target board name (list below)

rsb_4410 / rom_3420 / rom_5420 / rom_7420 / ubc_ds31 / ubc_200 / rsb_6410

${BSPHOME} : the directory that BSP tarball extacted to

${SD_DEVICE} : device name of SD card in Ubuntu (e.g. /dev/sdf)

${MMC_DEVICE} : device name of on-board eMMC in Android (e.g. /dev/block/mmcblk0)

debug console / serial console

serial terminal program (e.g. minicom, putty, teraterm ...) that serial port is configured to 115200 8N1

terminal console

terminal program (e.g. gnome-terminal, xfce4-terminal ...)

Perform the following command in terminal console

$ cd ${BSPHOME}/download/scripts

$ ./android_mk_sd_emmc_script/mksd-android.sh ${SD_DEVICE}

Boot up from SD card

Perform the following commands in debug console

# cd /data/mkimage/scripts

# sh ./mksd-android.sh ${MMC_DEVICE}

Remove SD card, then target board can boot up from onboard eMMC.

This release includes all porting and enhancements based on the Android open source code.

@@ Line 30: / Line 30: @@
 :Perform the following command in terminal console
-::<code>$ cd <span style="color: rgb(128, 0, 128);">'''${BSPHOME}'''</span>/scripts</code>
+::<code>$ cd <span style="color: rgb(128, 0, 128);">'''${BSPHOME}'''</span>/</code>download/<code>scripts</code>
-::<code>$ ./mksd-android.sh <span style="color: rgb(128, 0, 128);">'''${SD_DEVICE}'''</span></code>
+::<code>$ ./</code>android_mk_sd_emmc_script/<code>mksd-android.sh <span style="color: rgb(128, 0, 128);">'''${SD_DEVICE}'''</span></code>
 === <span id="to_transfer_whole_system_to_onboard_emmc" class="mw-headline"><span style="color: rgb(0, 102, 204);">To transfer whole system to onboard eMMC</span></span> ===