Difference between revisions of "IoTGateway/BSP/Linux/iMX6/Eclipse Plug-in"
From ESS-WIKI
| Line 7: | Line 7: | ||
Please perform following command to make toolchain installer. | Please perform following command to make toolchain installer. | ||
| − | < | + | $ bitbake fsl-image-x11 -c populate-sdk |
| − | $ bitbake fsl-image-x11 -c populate-sdk | + | |
| − | </ | + | <tt> |
| + | $ bitbake fsl-image-x11 -c populate-sdk | ||
| + | </tt> | ||
Please change working directory to where installer located and perform the following command. | Please change working directory to where installer located and perform the following command. | ||
| − | + | $ sudo ./poky-eglibc-x86_64-fsl-image-x11-cortexa9hf-vfp-neon-toolchain-qt4-1.5.3.sh | |
| − | $ sudo ./poky-eglibc-x86_64-fsl-image-x11-cortexa9hf-vfp-neon-toolchain-qt4-1.5.3.sh | ||
| − | |||
===Qt5 SDK=== | ===Qt5 SDK=== | ||
Please perform following command to make toolchain installer. | Please perform following command to make toolchain installer. | ||
| − | + | $ bitbake fsl-image-x11-qt5 -c populate-sdk | |
| − | $ bitbake fsl-image-x11-qt5 -c populate-sdk | ||
| − | |||
Please change working directory to where installer located and perform the following command. | Please change working directory to where installer located and perform the following command. | ||
| − | + | $ sudo ./poky-eglibc-x86_64-fsl-image-x11-qt5-cortexa9hf-vfp-neon-toolchain-1.5.3.sh | |
| − | $ sudo ./poky-eglibc-x86_64-fsl-image-x11-qt5-cortexa9hf-vfp-neon-toolchain-1.5.3.sh | ||
| − | |||
<br> | <br> | ||
| Line 35: | Line 31: | ||
Please download "eclipse-standard-kepler-R-linux-gtk-x86_64.tar.gz" manually, put it to directory ~/FILES/ and perform the following commands: | Please download "eclipse-standard-kepler-R-linux-gtk-x86_64.tar.gz" manually, put it to directory ~/FILES/ and perform the following commands: | ||
| − | + | $ cd ~/ | |
| − | $ cd ~/ | + | $ tar xvf ~/FILES/eclipse-standard-kepler-R-linux-gtk-x86_64.tar.gz |
| − | $ tar xvf ~/FILES/eclipse-standard-kepler-R-linux-gtk-x86_64.tar.gz | ||
| − | |||
==Starting the Eclipse IDE== | ==Starting the Eclipse IDE== | ||
Revision as of 12:52, 9 March 2016
Prerequisites
Installing cross toolchain
Please use bitbake command to build one toolchain installer or get a pre-built one.
Qt4 SDK
Please perform following command to make toolchain installer.
$ bitbake fsl-image-x11 -c populate-sdk
$ bitbake fsl-image-x11 -c populate-sdk
Please change working directory to where installer located and perform the following command.
$ sudo ./poky-eglibc-x86_64-fsl-image-x11-cortexa9hf-vfp-neon-toolchain-qt4-1.5.3.sh
Qt5 SDK
Please perform following command to make toolchain installer.
$ bitbake fsl-image-x11-qt5 -c populate-sdk
Please change working directory to where installer located and perform the following command.
$ sudo ./poky-eglibc-x86_64-fsl-image-x11-qt5-cortexa9hf-vfp-neon-toolchain-1.5.3.sh
Working with Eclipse
Installing the Eclipse IDE
Please download "eclipse-standard-kepler-R-linux-gtk-x86_64.tar.gz" manually, put it to directory ~/FILES/ and perform the following commands:
$ cd ~/ $ tar xvf ~/FILES/eclipse-standard-kepler-R-linux-gtk-x86_64.tar.gz
Starting the Eclipse IDE
$ source /opt/poky/1.5.3/environment-setup-cortexa9hf-vfp-neon-poky-linux-gnueabi $ ~/eclipse/eclipse
- select your workspace location
- Make sure you are in your Workbench and select "Install New Software" from the "Help" pull-down menu.
- Select "Kepler - http://download.eclipse.org/releases/kepler" from the "Work with:" pull-down menu.
- Expand the box next to "Linux Tools" and select the LTTng - Linux Tracing Toolkit boxes.
- Expand the box next to "Mobile and Device Development" and select the following boxes:
- Expand the box next to "Programming Languages" and select the following boxes:
- Complete the installation and restart the Eclipse IDE.
Installing the Plug-in
Configuring the Options
Creating the Project
Building the Project
Running the Application
Debugging the Application