Difference between revisions of "AlarmEvent"
From ESS-WIKI
Line 66: | Line 66: | ||
== Dashboard == | == Dashboard == | ||
+ | |||
+ | 1. Add RMM_Event data source | ||
+ | |||
+ | [[File:AlarmEvent dashboard 1.JPG|600x300px]] | ||
+ | |||
+ | 2. | ||
= Json Data Format = | = Json Data Format = |
Revision as of 03:27, 27 November 2018
Contents
Introduction
Alarm Event
How to
Software Requirements
- MQTT broker V1.0.3
- EI Agent
- Agent_Modbus_Handler_2.0.1-rc2 or newer
Installation
1.Double click AlarmEvent-X.X.X.exe to install.
2.Click "Next" to continue the setup wizard.
3.Select installation folder then click "Next"
4.Click "Next" to begin the installation
5.Complete the installation, click "Finish" to exit the setup wizard
6.Edit event_config.json (if need)
7.Restart device
Configuration
event_config.json (location: C:\Program Files (x86)\Advantech\AlarmEvent\config)
- handler_name: Subcribe handler name
- tag_name: Subcribe tag name
- subtype: Event subtype
- event:
- severity: Emergency = 0 ,Warning = 4
- msg_code: Device output code
- msg: Output code express message
- error_code: Output code express error code
- extmsg: Externel event message
- server: MQTT broker ip
- server_port: MQTT broker port
{ "handler_name":"Modbus_Handler", "tag_name":"Error_Code", "subtype":"TC_AC", "event": { "1": {"severity":0, "msg_code":241, "msg":"Door Open","error_code": "E:0030", "extmsg":"Immediate stop: Enclosure door open"}, "2": {"severity":4, "msg_code":242, "msg":"Door Open", "error_code": "A:0030","extmsg":"Warning: Enclosure door open"}, "3": {"severity":4, "msg_code":250, "msg":"CAB FTR DP ALM","error_code": "A:0031", "extmsg":"Warning: Cabinet filter differential pressure"}, "4": {"severity":0, "msg_code":321, "msg":"Oil level","error_code": "E:0040", "extmsg":"Immediate stop: Oil level alarm"}, "5": {"severity":4, "msg_code":322, "msg":"Oil level alarm","error_code": "A:0040", "extmsg":"Warning: Oil level high"}, "6": {"severity":0, "msg_code":401, "msg":"RD alarm","error_code": "E:0050", "extmsg":"Immediate stop: Refrigerant dryer"}, "7": {"severity":4, "msg_code":402, "msg":"RD alarm","error_code": "A:0050", "extmsg":"Warning: Refrigerant dryer"}, "8": {"severity":0, "msg_code":481, "msg":"Belt drive SERV","error_code": "E:0060", "extmsg":"Immediate stop: Belt drive service"}, "9": {"severity":0, "msg_code":561, "msg":"Fan MTR IMM stop","error_code": "E:0070", "extmsg":"Immediate stop: Fan motor trip"} }, "server":"127.0.0.1", "server_port": 3000 }
Dashboard
1. Add RMM_Event data source
2.
Json Data Format
{ "susiCommData": { "commCmd":2059, "requestID":2001, "agentID":"Modbus_Handler", "handlerName":"general", "sendTS":1541992952337, "eventnotify": { "subtype":"TC_AC", "msg":"Door Open", "severity":4, "handler":"Modbus_Handler", "extMsg": { "n": "Warning: Enclosure door open", "ErrorCode":"A:0030", "eventID":242 } } } }
Use Case
...
Release
Index | Version |
Date |
Platform |
OS |
Release Note |
|
|
|