Difference between revisions of "IoTGateway/BSP/Linux/iMX6/Mfgtool"
From ESS-WIKI
Alex.cheng (talk | contribs) (Modify description) |
Alex.cheng (talk | contribs) (Modify description) |
||
| Line 59: | Line 59: | ||
imx6dl-ebcrs03-a1 1G | imx6dl-ebcrs03-a1 1G | ||
imx6dl-ubc220-a1 1G | imx6dl-ubc220-a1 1G | ||
| − | imx6q-ubc220-a1 | + | imx6q-ubc220-a1 1G |
imx6q-ebcrb01-a1 1G | imx6q-ebcrb01-a1 1G | ||
imx6q-ebcrs03-a1 2G | imx6q-ebcrs03-a1 2G | ||
| Line 82: | Line 82: | ||
imx6dl-rom7421-a1 1G | imx6dl-rom7421-a1 1G | ||
imx6dl-rom7421-a1 512M | imx6dl-rom7421-a1 512M | ||
| − | + | imx7d-ebcrm01-a1 2G | |
| + | |||
[variable] | [variable] | ||
DDR = 1G | DDR = 1G | ||
| Line 93: | Line 94: | ||
[LIST] | [LIST] | ||
name = | name = | ||
| − | ADV adv-loader & Image adv-loader & Image | + | ADV adv-loader & Image adv-loader & Image for i.MX6 |
| − | ADV kernel update zImage and dtb file | + | ADV kernel update zImage and dtb file for i.MX6 |
| − | ADV u-boot update u-boot | + | ADV u-boot update u-boot for i.MX6 |
| − | ADV adv-loader update adv-loader | + | ADV adv-loader update adv-loader for i.MX6 |
| + | ADV imx7 u-boot update u-boot for i.MX7 | ||
| + | ADV imx7 qspi u-boot update u-boot to qspi for i.MX7 | ||
| + | ADV imx7 kernel update zImage and dtb file for i.MX7 | ||
| + | ADV imx7 Image update total image for i.MX7 | ||
== define config variable == | == define config variable == | ||
Revision as of 10:05, 25 February 2019
User Guide for using mfgtool
Download Mfgtools
- Yocto 2.1
- branch = 4.1.15
git clone -b branch https://github.com/ADVANTECH-Corp/Mfgtools.git
Enter recovery mode
ROM-5420
- Set the correct boot mode, then power on.
EBC-RS03
- Set the correct boot mode, then power on.
EBC-RM01
- Set the correct boot mode, please do not insert the boot SD card. Then power on.
Other Projects
- Set eng mode,then power on(1-off,2-on)
Connect the OTG to the PC
- After connecting to PC, a HID-compliant device will be shown in the Device
Modify config file
modify cfg.ini
- mfgtools/cfg.ini
[profiles] chip = Linux [platform] [LIST] name = ADV adv-loader & Image #Projects imx6q-epcrs200-a1 1G imx6dl-ebcrs03-a1 1G imx6dl-ubc220-a1 1G imx6q-ubc220-a1 1G imx6q-ebcrb01-a1 1G imx6q-ebcrs03-a1 2G imx6qp-rom7421-a1 1G imx6qp-rom7421-a1 2G imx6q-rom3420-a1 1G imx6q-rom3420-a1 2G imx6q-rom5420-a1 1G imx6q-rom5420-a1 2G imx6q-rom5420-b1 1G imx6dl-rom5420-b1 1G imx6dl-rom5420-b1 2G imx6q-rom5420-b1 2G imx6q-rom7420-a1 1G imx6q-rom7420-a1 2G imx6q-rsb4410-a1 1G imx6q-rsb4410-a2 1G imx6q-rsb4411-a1 1G imx6q-epcrs200-a1 1G imx6q-rsb4411-a1 2G imx6dl-rom5420-b1 512M imx6dl-rom7421-a1 1G imx6dl-rom7421-a1 512M imx7d-ebcrm01-a1 2G
[variable] DDR = 1G board = imx6q-rsb4411-a1 mmc = 0 image = fsl-image-qt5-imx6qrsb4411-20141218174618.rootfs.sdcard
which operation you want to do
[LIST] name = ADV adv-loader & Image adv-loader & Image for i.MX6 ADV kernel update zImage and dtb file for i.MX6 ADV u-boot update u-boot for i.MX6 ADV adv-loader update adv-loader for i.MX6 ADV imx7 u-boot update u-boot for i.MX7 ADV imx7 qspi u-boot update u-boot to qspi for i.MX7 ADV imx7 kernel update zImage and dtb file for i.MX7 ADV imx7 Image update total image for i.MX7
define config variable
[variable] DDR = (size of memory) board = (projects name) mmc = ( “0” means “emmc” ,”1” means “SD Card” .) image = (If you want to update whole image,fill the image file name )
Copy file
You must copy file to Profiles\Linux\OS Firmware\files\imx6qrsb4411a1-1G\
ADV Image fsl-image-qt5-imx6qrsb4411-20141218174618.rootfs.sdcard ADV kernel zImage and dtb file ADV u-boot u-boot_crc.bin.crc & u-boot_crc.bin ADV adv-loader SPL
Running mfgtool and update
running the MfgTool2.exe and update
- If you can’t running mfgtool2.exe, you can check MfgTool.log
- Click “Start”,you can get information form debug console
- After update finish,it will be shown below
- Click “Exit” to terminate the application.
