Difference between revisions of "How to debug"
From ESS-WIKI
Yunjin.jiang (talk | contribs) |
Yunjin.jiang (talk | contribs) |
||
| Line 37: | Line 37: | ||
Please connect device's TX to usb2uart adapter's RX and device's RX to usb2uart adapter's TX . | Please connect device's TX to usb2uart adapter's RX and device's RX to usb2uart adapter's TX . | ||
| + | |||
| + | |||
| + | |||
| + | |||
= UART parameter = | = UART parameter = | ||
Revision as of 09:56, 25 March 2019
USB2UART Bridge
There are plenty types of usb to uart bridge in the market . Most of them use the following chip :
- CP210X
- PL2303
Download driver for CP210X and PL2303 .
Hardware PIN define
RSB4680 debug port pin define :
| PIN | PIN Name |
| 1 | NC |
| 2 | TX |
| 3 | RX |
| 4 | GND |
Note :
Please connect device's TX to usb2uart adapter's RX and device's RX to usb2uart adapter's TX .
UART parameter
- BaudRate：115200
- DataBits ：8
- StopBits ：1
- Parity ：None
- FlowControl：None or XON/XOFF
