Difference between revisions of "Wise32xxweb/LuCI"
| Line 102: | Line 102: | ||
| − | *<font color="red">Please note | + | |
| + | *<font color="red">Please note</font> | ||
| + | |||
1. Firmware update process may take around 1~2 minutes, please don’t turn off the power or press the reset button. | 1. Firmware update process may take around 1~2 minutes, please don’t turn off the power or press the reset button. | ||
2. After firmware upgrade, the system will restore its default setting, the IP address will return to 192.168.1.1. | 2. After firmware upgrade, the system will restore its default setting, the IP address will return to 192.168.1.1. | ||
| − | 3. The device is unavailable during the upgrade process. Any connections to or through the device will be lost. | + | 3. The device is unavailable during the upgrade process. Any connections to or through the device will be lost. |
=== Reboot === | === Reboot === | ||
| + | |||
| + | User can reboot system through clcik "Perform reboot". System will reboot immediately. | ||
| + | |||
| + | [[File:3240reboot.jpg|800px|3240reboot.jpg]] | ||
== Service == | == Service == | ||
| Line 115: | Line 121: | ||
=== Remote Management === | === Remote Management === | ||
| − | In this Page, you can manage the router from anywhere on the Internet port | + | In this Page, you can manage the router from anywhere on the Internet port. |
| + | |||
| + | [[File:3240remotema.jpg|800px|3240remotema.jpg]] | ||
== Network Configuration == | == Network Configuration == | ||
| − | In this page, you can set Network Interface, Routing Gateways | + | In this page, you can set Network Interface, Routing Gateways and DNS Client based on your networking environment. |
| + | |||
| − | |||
=== Ethernet === | === Ethernet === | ||
| Line 129: | Line 137: | ||
*Select interface. | *Select interface. | ||
| − | [[File: | + | [[File:3240ethernet.jpg|600px|3240ethernet.jpg]] |
| + | |||
| + | |||
| + | [[File:3240ethernet 1.jpg|600px|3240ethernet 1.jpg]] | ||
| + | |||
| + | *Change protocol. | ||
| + | |||
| + | [[File:3240ethernet 2.jpg|600px|3240ethernet 2.jpg]] | ||
*Edit Interface. | *Edit Interface. | ||
| − | [[File: | + | [[File:3240ethernet 3.jpg|600px|3240ethernet 3.jpg]] |
| + | |||
| + | |||
=== Wifi === | === Wifi === | ||
| − | + | In this page, you can set wireless Interface, scan other wifi router in your environment or setting wifi AP mode. Default setting wifi Ap mode, The access point account is wise_3240 and no password | |
| − | + | Next step is Wi-Fi Sta <-> Wi-Fi AP mode setting. This mode is means wise-3240 wireless uplink through another Wifi Ap router to internet and downlink offer the Wifi client access point. as following | |
| − | + | 1. Scan Wifi Ap | |
| − | + | 2. Join network and input ssid and password as your network environment | |
| − | + | 3. Dissable Wireless ,click add wifi Ap mode and input ssid 、password as you need | |
Revision as of 09:29, 9 April 2019
Contents
Default Setting
- IP Address: 192.168.1.1
- Username: root
- Password: ePaper
Main Page / System Information
If logging successful, you will see software information on the Overview page as following.
Status
Firewall
This page show firewall rule table. When you change the firewall setting of Ethernet interface , you should click Restart Firewall
System log
This page show about system log message
kernel log
This page show about linux Kernel message
Processes
This page shows all running processes on your system, with child processes indented and displayed below their parent. For each process the PID, owner and command are displayed. You can terminate the running processes but you should know the risk of the service stop in system.
System
System
This page offer three function operation as below
- System Properties
This function is for sync the system's current time with browser .On operating systems that have a separate hardware clock, it can be used to set that too. This form also offer User-defined host name.
- Change time zone
It also allows you to set the system's default time zone, which is used to convert the system time to a human-readable format and offset.
- Time server sync
This function is for configuring the system to automatically synchronize the time with a remote server. Synchronization will be done using the Unix time protocol or NTP, depending on which commands are installed and what the remote system supports.
Administration Users
This page you can change LuCI web login password as you want
Backup/Flash Firmware
This page has four operation Download backup、Restore backup 、Reset to defaults and flash firmware as below.
Download backup & Restore backup
User can download backup file that is value of all web settings by click on "Generate archive" button.
When user has been downloaded backup file, user can recover all web settings by function of restore backup.
Reset to defaults
Click "Perform reset" button the value of all the web settings will be back to original setting.
Firmware Update
Please download the most updated Firmware version from Advantech Website to your computer.
1.Click choose file button and upload the image.
2.Click "Flash image" button and upload firmware image
3. After firmware image upload complete, it show the Checksum on screen.
User should make sure the firmware checksum is correct or not and click button proceed.
- Please note
1. Firmware update process may take around 1~2 minutes, please don’t turn off the power or press the reset button.
2. After firmware upgrade, the system will restore its default setting, the IP address will return to 192.168.1.1.
3. The device is unavailable during the upgrade process. Any connections to or through the device will be lost.
Reboot
User can reboot system through clcik "Perform reboot". System will reboot immediately.
Service
Remote Management
In this Page, you can manage the router from anywhere on the Internet port.
Network Configuration
In this page, you can set Network Interface, Routing Gateways and DNS Client based on your networking environment.
Ethernet
Setting Ethernet IP address.
- Select interface.
- Change protocol.
- Edit Interface.
Wifi
In this page, you can set wireless Interface, scan other wifi router in your environment or setting wifi AP mode. Default setting wifi Ap mode, The access point account is wise_3240 and no password
Next step is Wi-Fi Sta <-> Wi-Fi AP mode setting. This mode is means wise-3240 wireless uplink through another Wifi Ap router to internet and downlink offer the Wifi client access point. as following
1. Scan Wifi Ap
2. Join network and input ssid and password as your network environment
3. Dissable Wireless ,click add wifi Ap mode and input ssid 、password as you need