Revision as of 08:31, 18 October 2019

Gannt Panel For TLS

Introduction

This is a customized Gantt chart for the TLS project. The diagram has following features.

1. Can gets TLS data in period and shows color bar with priority display rule.
2. Can set customize status text from option.
3. Direction of time axis: from Left (past) to Right (present).
4. Can set color (Red, Yellow, Green, Blue) mapping to light sensor ID (Light1, Light2, Light3, Light4) by TLS.
5. Can define timeline period on Gantt chart.

Grafana Version

This Project is base on Grafana v5.3.0 .

Set Up Data Source By Grafana

 Step 1: Open "Configuration".
 Step 2: Add new data source see Figure 1.
 Step 3: Fill in the information see Figure 2.

                                                                                                            (Figure 1 、Configuration) 

                                                               (Figure 2 、 Set Up DataSource)

How To Create A New Gantt Panel

 Step 1: Add panel and choose plugin "Gantt-for-TLS" see Figure 3.
 Step 2: Edit panel see Figure 4.
 Step 3: Set up Metrics and choose DataSource "RMM-SimpleJson".
 Step 4: Set up all of the sensor's(Light1、Light2、Light3、Light4) "Device" "Plugin" "Sensor" "Alias" see Figure 5.
 
 Warning: Although the sensor light can define the mapping color but the aliases must be these strings "red" "yellow" "green" "blue".

                                                                                                      (Figure 3 、 Add Panel)

                                                                                                             (Figure 4 、 Edit Panel)

                                                                                                                                                       (Figure 5 、 Set Metrics)

Configuration

Example:

...

Release

This is an overview that displays Modbus Service versions and some stats and numbers for each release.