Revision as of 08:00, 3 December 2019

Getting Started

Ubuntu 18.04 (recommended) or 16.04

To enter force recovery mode, you can do:

1. Hold the Recovery key

2. Power on device

3. Wait for 5 seconds and you can release the Recovery key

Once it enters recovery mode successfully, the HDMI output should be disabled and also you can detect a new "nvidia apx" device.

Download the SDK Manager for Jetson TX2 series from JetPack website.

You will need a nVidia developer account for access.

After download complete, install via dpkg.

$ sudo dpkg -i sdkmanager_0.9.14-4964_amd64.deb

Then, you're able to run SDK manager.

$ sdkmanager

@@ Line 2: / Line 2: @@
 == <span style="color:#0070c0">Host Environment</span> ==
+Ubuntu 18.04 (recommended) or 16.04
 == <span style="color:#0070c0">Force Recovery Mode</span> ==
-== <span style="color:#0070c0">Flash Ubuntu Image</span> ==
+To enter force recovery mode, you can do:
+:1. Hold the Recovery key
+:2. Power on device
+:3. Wait for 5 seconds and you can release the Recovery key
+Once it enters recovery mode successfully, the HDMI output should be disabled and also you can detect a new "nvidia apx" device.
+== <span style="color:#0070c0">Flash Pre-built Image</span> ==
 == <span style="color:#0070c0">Install SDK Components</span> ==
+=== <span style="color:#0070c0">SDK Manager</span> ===
+Download the SDK Manager for '''Jetson TX2 series''' from [https://developer.nvidia.com/embedded/jetpack JetPack website].
+You will need a nVidia developer account for access.
+After download complete, install via dpkg.
+ $ sudo dpkg -i sdkmanager_0.9.14-4964_amd64.deb
+Then, you're able to run SDK manager.
+ $ sdkmanager
+=== <span style="color:#0070c0">Installation</span> ===
 = Demo =