Difference between revisions of "1. Using AndroidToool."

Revision as of 08:58, 14 May 2020

Download AndroidTool_v2.65.rar and DriverAssitant_v4.5.rar

Step1 Connect with the OTG port and PC.

Step2 Double click DriverInstall.

Step3 Enter into MASKROM mode .

There are two ways to enter MASKROM .

1. Hardware way to enter MASKROM

TBD

2. Software way to enter MASKROM

When the device boot up to android, you can use ADB or Debug console, send command "reboot loader" .

Or Press "ctrl + c" key when booting into uboot, until get the following information on debug console :

Hit any key to stop autoboot: 0
rkboot # <INTERRUPT>
rkboot # loader

So the way need the device could boot up to android OS.

Click "Advantech Function" , then "Enter MASHROM" button to enter MASHROM mode .

Step4 Select the image path.

Step5 Finish the update

@@ Line 20: / Line 20: @@
 When the device boot up to android, you can use ADB or Debug console, send command "reboot loader"&nbsp;.
+Or Press&nbsp;"ctrl + c" key when booting into uboot, until get the following information on debug console&nbsp;:&nbsp;
+<pre>Hit any key to stop autoboot: 0
+rkboot # <INTERRUPT>
+rkboot # loader</pre>
 So the way need the device could boot up to android OS.
@@ Line 27: / Line 32: @@
 Click "Advantech Function" , then "Enter MASHROM" button to enter MASHROM mode .
-[[File:RK3288 upgrade Loader MASHROM.png]]
+[[File:RK3288 upgrade Loader MASHROM.png|RTENOTITLE]]
 '''Step4''' Select the image path.