Revision as of 04:09, 15 June 2016

Bluetooth Testing Guide for Quark Platform

Getting Started

${BSP_HOME} : the directory BSP pack extracted to

e.g. ~/LBV2011/meta-clanton_v1.2.0

${BT_MAC_ADDR} : Bluetooth peer device's MAC address

${FILE} : test file that be sent to peer device

All operations in this guide are based on BlueZ5, please make sure the verion of BSP is V2.011 at least.

In LBV2011 the BlueZ4 is used by default, it is necessary to do the following precedures to convert to BlueZ5.

Download the QuarkLBV2011_convert_to_BlueZ5.tar.gz, and execute the following command:

$ tar xvf QuarkLBV2011_convert_to_BlueZ5.tar.gz -C ${BSP_HOME}

Rebuild all image files(click this for details)

If peer device is not paired ever...

# ./bt_pair.sh ${BT_MAC_ADDR}

If peer device has paired, repair it...

# ./bt_pair.sh -u ${BT_MAC_ADDR}

While the configuration of the peer device is ready...

# ./bt_send.sh ${BT_MAC_ADDR} ${FILE}

@@ Line 19: / Line 19: @@
 ===Convert BlueZ4 to BueZ5 if BSP quarkLBV2011 used===
 In LBV2011 the BlueZ4 is used by default, it is necessary to do the following precedures to convert to BlueZ5.<br>
-:Download the [[File:quarkLBV2011_convert_to_BlueZ5.tar.gz]], and perform below command
+:Download the [[Media:QuarkLBV2011_convert_to_BlueZ5.tar.gz|QuarkLBV2011_convert_to_BlueZ5.tar.gz]], and execute the following command:
-::<code>$ tar xvf quarkLBV2011_convert_to_BlueZ5.tar.gz -C <span style="color:#7030a0;">'''${BSP_HOME}'''</span></code>
+::<code>$ tar xvf QuarkLBV2011_convert_to_BlueZ5.tar.gz -C <span style="color:#7030a0;">'''${BSP_HOME}'''</span></code>
 :Rebuild all image files(click [[IoTGateway/BSP/Linux/Quark/Yocto_LBV2_User_Guide#To_build_all_image_files|this]] for details)