Difference between revisions of "IoTGateway/BSP/Android/iMX6/FAQ"
From ESS-WIKI
(→boot logo) |
(→u-boot) |
||
| Line 18: | Line 18: | ||
(1) BSP support | (1) BSP support | ||
(2) Convert the bmp file to hex value. | (2) Convert the bmp file to hex value. | ||
| + | Example : bmp file name is aaa.c | ||
(3) Step1. | (3) Step1. | ||
| − | Add | + | Add aaa.o in board/freescale/common/Makefile |
| − | Add | + | Add aaa.c in board/freescale/common/ |
Step2. | Step2. | ||
Modify LCD setting in board/freescale/mx6q-rom-3420/mx6q_rom-3420.c | Modify LCD setting in board/freescale/mx6q-rom-3420/mx6q_rom-3420.c | ||
| Line 27: | Line 28: | ||
Enable CONFIG_SPLASH_SCREEN config | Enable CONFIG_SPLASH_SCREEN config | ||
Set lvds_num to 0, because we use LVDS0 channel. </small> | Set lvds_num to 0, because we use LVDS0 channel. </small> | ||
| + | |||
==kernel== | ==kernel== | ||
Revision as of 10:17, 14 July 2016
i.MX6 Android - Frequently Asked Questions
compiling
u-boot
kernel
application
boot logo
u-boot
(1) BSP support
(2) Convert the bmp file to hex value.
Example : bmp file name is aaa.c
(3) Step1.
Add aaa.o in board/freescale/common/Makefile
Add aaa.c in board/freescale/common/
Step2.
Modify LCD setting in board/freescale/mx6q-rom-3420/mx6q_rom-3420.c
Fill in correct timing parameters for customer panel (Phill provide parameter).
Step3.
Enable CONFIG_SPLASH_SCREEN config
Set lvds_num to 0, because we use LVDS0 channel.
kernel
SDcard image
mini-PCIe