Difference between revisions of "RSB-3430 user guide"

From ESS-WIKI
Jump to: navigation, search
Line 279: Line 279:
 
== '''Linux系统的基本使用(Linux System Basic Operating Method)''' ==
 
== '''Linux系统的基本使用(Linux System Basic Operating Method)''' ==
  
−
=== '''      Display Setting (RSB-3430)''' ===
+
=== '''載入預設值由uboot 設定(Load Default Setting in Uboot )''' ===
 +
 
 +
'''1. 開機時 在五秒內按下空白鍵 ,進入Uboot '''
 +
 
 +
'''2. Command : '''
 +
 
 +
'''    env default -a '''
 +
 
 +
'''    saveenv '''
 +
 
 +
'''    reset   '''
 +
 
 +
'''[[File:RSB-3430 Load default 2021-10-27 091752.jpg]]'''
 +
 
 +
=== '''顯示設定 (Display  Setting ) ''' ===
 +
 
 +
''' 預設值為: HDMI 輸出'''
 +
 
  
−
'''   '''
 
  
 
=== '''乙太網路使用方法(Ethernent Testing Method)''' ===
 
=== '''乙太網路使用方法(Ethernent Testing Method)''' ===
Line 287: Line 303:
 
'''Command : ifconfig '''
 
'''Command : ifconfig '''
  
−
'''[[File:Ethernet Test 2021-09-09 131742.jpg|RTENOTITLE]]'''
+
[[File:RSB-3430 ifconfig info 2021-10-27 092342.jpg]]
 +
 
 +
'''Command: Ping 8.8.8.8 '''
 +
 
 +
'''[[File:RSB-3430 ping 8888 2021-10-27 092542.jpg]]'''
 +
 
 +
 
  
−
'''Command: Ping - I eth1 8.8.8.8  or Ping - I eth0 8.8.8.8  '''
+
=== '''WiFi & BT 使用方法(WIFI & Bluetooth Testing Method)''' ===
 +
<pre>M.2 module (EWM-W162M201E) - WIFI / BT Function&nbsp;
 +
WIFI&nbsp;
  
−
'''[[File:PingTest2021-09-09 131931.jpg|RTENOTITLE]]'''
+
$ ifconfig mlan0 up
 +
$ wpa_passphrase ${SSID} ${WPA_KEY} > /tmp/wpa.conf
 +
$ wpa_supplicant -BDwext -imlan0 -c/tmp/wpa.conf
 +
$ udhcpc -b -i mlan0
  
−
=== '''WiFi使用方法(WIFI Testing Method)''' ===
+
BlueTooth&nbsp;
−
<pre>Command&nbsp;:
 
  
−
# killall wpa_supplicant
+
$ /usr/libexec/bluetooth/bluetoothd -C &
−
# ifconfig wlan0 up
+
$ hciconfig hci0 up
−
# wpa_passphrase "SSID" "PASSWORD" > /tmp/wpa.conf
+
$ bluetoothctl
−
# wpa_supplicant -BDwext -iwlan0 -c/tmp/wpa.conf
+
$ discoverable on
−
# udhcpc -b -i wlan0'''
+
$ pairable on
 +
$ scan on
 +
[NEW] FC:18:3C:8D:75:F4 Device ID&nbsp;
 +
$ scan off
 +
$ pair FC:18:3C:8D:75:F4
 +
$ connect FC:18:3C:8D:75:F4
 +
</pre>
  
−
ping 8.8.8.8
 
−
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
 
−
64 bytes from 8.8.8.8: icmp_seq=1 ttl=54 time=2.10 ms
 
−
64 bytes from 8.8.8.8: icmp_seq=2 ttl=54 time=2.10 ms</pre>
 
  
−
[[File:WifiTest 2021-09-09 132238.jpg|RTENOTITLE]]
 
  
 
=== '''4G使用方法(4G Testing Method)''' ===
 
=== '''4G使用方法(4G Testing Method)''' ===

Revision as of 02:41, 27 October 2021

資源特性(Features)

  • NXP Arm® Cortex®-A53 i.MX8M Plus Quad/Dual up to 1.8 GHz
  • Onboard LPDDR4 4 GB / 6 GB, 4000MT/s memory
  • HDMI 1920x1080 at 60Hz, 1 Single or 1 Dual Channel 24 bit LVDS (or 1 4-Lane MIPI-DSI by BOM Option)
  • 1 4-wire RS-232/422/485, 1 USB3.2 Gen1 By 1, 1 USB2.0, 1 Micro SD, 1 Mic. in / Line out
  • 1 mini-PCIe for 3G/4G, 1 M.2 2230 Key E Slot
  • Supports Yocto Linux and Android
  • Support I/O Expansions boards by UIO40-Express

訂購資訊(Ordering Information)

RTENOTITLE

规格（Specifications）

接口布局和尺寸(Layout and Sizes)

接口布局圖 Board Dimension Layout 

RTENOTITLE

RTENOTITLE


RTENOTITLE


 'Connector List'

BAT RTC Battery Connector
BL1 LVDS Backlight 1 
BL2 LVDS Backlight 2 
COM1  COM + CAN Pin Header (default as debug console) 
CSI1 MIPI-CSI Camera Input 1
CSI2 MIPI-CSI Camera Input 2 
DCIN/DCIN 1 12V DC Power Inout by DC Jack / by Pin Header 
HDMI  HDMI CONN
LAN1 Ethernet 1 
LAN2  Ethernet 2
LOUT Line Out Pin Header
LVDS LVDS CONN.
M2 M.2 Key E CONN.
MIC MIC In Pin Header
MPCIE Mini-PCIe CONN.
RST Rest Button
SD SD Slot
UIO1  UIO40-Express Pin Header 1 
UIO2  UIO40-Express Pin Header 2 
USB1 USB CONN. (USB 3.2 Gen 1 on TOP + USB 2.0 on BOT)

接口引脚定義 (Pin definitions)

 机械尺寸  (Mechanical Characteristics)

RTENOTITLE

快速入门 (Quick Start)

系统下载 (OS Download)

'Linux系统 (Linux OS)'   

Git BSP Tag Version

Product

 BSP/Image

Date

Alpha Release

Beta Release

MP Release

Release Note

Comment

Release Owner

imx6LBV90146
 RSB-3430A1  3430A1AIM20LIV90146_DualQuad_2021-08-08.img.gz 2021-08-08 V


   

 Linux 燒錄方法 (Linux Flash eMMC Method)

1. 確認SD 在Ubuntu 電腦中的代號

RTENOTITLE

RTENOTITLE

2. 先將鏡像燒錄到SD Card 中( Create a bootable SD card ) 

'RTENOTITLE



RTENOTITLE

3.設定終端機(Set Debug Terminal) 

Debug 串口調試 (Debug port Setting)

以 Tera Term  为例介绍如何使用串口调试功能 

   Baud Rate波特率：115200
   Data 数据位：8
   Parity 奇偶校验：无
   Stop 停止位：1
   Flow Control流控：无

Tera Term Tool 

RTENOTITLE

RTENOTITLE

Check the Sriel port in Device Manager (查看PC端的串口号)：

if you can not identify the Serial device , please check your serial driver. 

RTENOTITLE

4. 將SD card 插入機器 

  RTENOTITLE

5. 檢查撥碼開關  ( 1 ON , 2 OFF) 

RTENOTITLE

6. 接上Debug Cable 

RTENOTITLE

7. 打開電源 

RTENOTITLE

8. 由終端機進入系統 

RTENOTITLE

9. 燒錄鏡像到 eMMC flash 

將3430A1AIM20LIV90146_DualQuad_flash_tool.tgz 複製到U盤中,插入機器的USB Port 

RTENOTITLE

在系統中 ,確認USB中燒錄資料 

RTENOTITLE

RTENOTITLE

在根目錄下 ,解壓縮 

RTENOTITLE

在mk_Inand 資料夾中執行 ./mksd-linux.sh 

RTENOTITLE

RTENOTITLE

RTENOTITLE

10. 移除SD 卡,從eMMC 開機. 

RTENOTITLE

 

Linux系统的基本使用(Linux System Basic Operating Method)

載入預設值由uboot 設定(Load Default Setting in Uboot )

1. 開機時 在五秒內按下空白鍵 ,進入Uboot 

2. Command : 

    env default -a 

    saveenv 

    reset   

RSB-3430 Load default 2021-10-27 091752.jpg

顯示設定 (Display  Setting ) 

 預設值為: HDMI 輸出


乙太網路使用方法(Ethernent Testing Method)

Command : ifconfig 

RSB-3430 ifconfig info 2021-10-27 092342.jpg

Command: Ping 8.8.8.8 

RSB-3430 ping 8888 2021-10-27 092542.jpg


WiFi & BT 使用方法(WIFI & Bluetooth Testing Method)

M.2 module (EWM-W162M201E) - WIFI / BT Function 
WIFI 

$ ifconfig mlan0 up
$ wpa_passphrase ${SSID} ${WPA_KEY} > /tmp/wpa.conf
$ wpa_supplicant -BDwext -imlan0 -c/tmp/wpa.conf
$ udhcpc -b -i mlan0

BlueTooth 

$ /usr/libexec/bluetooth/bluetoothd -C &
$ hciconfig hci0 up
$ bluetoothctl
$ discoverable on
$ pairable on
$ scan on
[NEW] FC:18:3C:8D:75:F4 Device ID 
$ scan off
$ pair FC:18:3C:8D:75:F4
$ connect FC:18:3C:8D:75:F4


4G使用方法(4G Testing Method)

Command:
Test 4G: (EWM-C117FL06E - USB)
Step 1: Connect EWM-C117FL06E to Mini PCIE slot on 9680015491 and connect
the card to CN6 PCIe_D slot on ROM-DB5901.
Step 2: Connect the antenna 1750007990-01 to the SMA (F) connector on
9680015491
and connect the IPEX connector to MT1 on EWM-C117FL06E module.
Step 3: Connect the Mini USB cable from 9680015491 to USB 2.0 Type A port on
ROM-DB5901.
Step 4: Power on and execute the pppd command to connect to the network.

RTENOTITLE

RTENOTITLE

GPIO使用方法(GPIO Operating Method)

RTENOTITLE 


Loop-back Test (Take GPIO4 and GPIO5 as examples)  

Step 1: Connect GPIO4 and GPIO5
Step 2: Export GPIO interface

root@imx8qxprom5620a1 : ~# echo 456 > /sys/class/gpio/export
root@imx8qxprom5620a1 : ~# echo 452 > /sys/class/gpio/export

Step 3: Set direction

root@imx8qxprom5620a1 : ~# echo out > /sys/class/gpio/gpio1/direction
root@imx8qxprom5620a1 : ~# echo in > /sys/class/gpio/gpio2/direction

Step 4: Read value and set output value then check

root@imx8qxprom5620a1 : ~# cat /sys/class/gpio/gpio2/value
0r
oot@imx8qxprom5620a1 : ~# echo 1 > /sys/class/gpio/gpio1/value
root@imx8qxprom5620a1 : ~# cat /sys/class/gpio/gpio2/value
1

串口使用方法(Serial Port Operating Method)

RS-232 Test 

SW7 Setting (SW7設置) 

RTENOTITLE

蓝牙使用方法(BlueTooth Operating Method)

Command : 

$ hciconfig hci0 up
$ bluetoothctl
$ discoverable on
$ pairable on
$ scan on
[NEW] FC:18:3C:8D:75:F4 myphone
$ scan off
$ pair FC:18:3C:8D:75:F4
$ connect FC:18:3C:8D:75:F4

RTENOTITLE

  遠程訪問及文件傳輸(Remote Access and File Transimmion)

              查看主板IP位址 ( Chech IP Address )：​ 

        Command : ifconfig

RTENOTITLE

Windows下SSH访问及文件传输

SSH Remote Log into Device 

  • SSH远程登录,以putty选择putty.exe(或者使用Xshell、SecureCRT等类似软件)
  • 需要设置远程设备的IP、通讯端口(默认22)、通讯方式，登录后验证用户名密码


RTENOTITLE

RTENOTITLE


RTENOTITLE

RTENOTITLE

通用方法(General Method)

      查看CPU温度(Check CPU Temperature)

    root@imx8qxprom5620a1:/# cat /sys/devices/virtual/thermal/thermal_zone0/temp 44600

    # 或者直接以度爲單位顯示 echo $[$(cat /sys/class/thermal/thermal_zone0/temp)/1000]° >>> 45°

      查看CPU频率(Check CPU Frequency)

           cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq 
           >> 900000
           cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq    
           >> 1200000

      查看内存容量(Check Memory Capacity)

root@imx8qxprom5620a1:/# busybox free -m
             total       used       free     shared    buffers     cached
Mem:       1794920     516080    1278840      17252      9852        80292
-/+ buffers/cache:     425936    1368984
Swap:            0          0          0

      查看存储容量(Check Storage Capacity)

root@imx8qxprom5620a1:/# busybox df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/root                13.4G      1.7G     11.1G  13% /
devtmpfs                395.8M      4.0K    395.8M   0% /dev
tmpfs                   876.4M         0    876.4M   0% /dev/shm
tmpfs                   876.4M     16.5M    859.9M   2% /run
tmpfs                   876.4M         0    876.4M   0% /sys/fs/cgroup
tmpfs                   876.4M      4.0K    876.4M   0% /tmp
tmpfs                   876.4M    280.0K    876.2M   0% /var/volatile
/dev/mmcblk0p2           13.6G      1.7G     11.3G  13% /run/media/mmcblk0p2
/dev/mmcblk0p1           63.9M     23.4M     40.5M  37% /run/media/mmcblk0p1
/dev/mmcblk1p1           63.9M     23.4M     40.5M  37% /run/media/mmcblk1p1
tmpfs                   175.3M     88.0K    175.2M   0% /run/user/0
root@imx8qxprom5620a1:/#

      網路Ping測試(Ping Network Testing)

     ping 8.8.8.8
     PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
     64 bytes from 8.8.8.8: icmp_seq=1 ttl=54 time=2.10 ms
     64 bytes from 8.8.8.8: icmp_seq=2 ttl=54 time=2.10 ms

      設置RTC (RTC Setting) 

     root@imx8qxprom5620a1:/# systemctl stop ntpdate.service
     root@imx8qxprom5620a1:/# date 090816072021 && hwclock -w && date
             Wed Sep  8 16:07:00 UTC 2021
             Wed Sep  8 16:07:00 UTC 2021
     root@imx8qxprom5620a1:/# date
             Wed Sep  8 16:07:06 UTC 2021
     root@imx8qxprom5620a1:/#'''

         

Linux BSP編譯方法(Android BSP Compile Method)

Yocto 3.0

Retrieved from "https://ess-wiki.advantech.com.tw/wiki/index.php?title=RSB-3430_user_guide&oldid=21804"