Difference between revisions of "IoTGateway/BSP/Android/iMX6/FAQ"

 Please refer to the following sections for details
   (Android)

 (1)  BSP support
 (2)  Convert the bmp file to hex value.
      Example : bmp file name is aaa.c
 (3)  Step1.
        Add aaa.o in board/freescale/common/Makefile
        Add aaa.c in board/freescale/common/
      Step2.
        Modify LCD setting in board/freescale/mx6q-rom-3420/mx6q_rom-3420.c
        Fill in correct timing parameters for customer panel (Phill provide parameter).
      Step3.
        Enable CONFIG_SPLASH_SCREEN config
        Set lvds_num to 0, because we use LVDS0 channel.

 (1) Please rename your Logo file to "android-logo-mask.png"
 (2) Replace the logo image file
     --> android_M6.0.1_1.0.0/frameworks/base/core/res/assets/images/android-logo-mask.png.

 (1) Download IRTOUCH driver  (Irtouch-dualtouch-package-android-v14.2.0.0002.7z)
 
 (2) Download IRTOUCH SWAP mode tool (Swapmode.7z)
 
 (3) Swap mode
     You need to check and swap IRTOUCH 0X80.
     Please install SWAP mode tool in win7.
     Run SwapModeTool.exe and choose IRTOUCH 0X80.
   
 (4) Installing the IRTOUCH Dual-touch Touchscreen Driver
     (a) irtouchusb-dt.c locate to kernel_imx/driver/input/touchscreen;
     (b) modify Makefile in kernel_imx/driver/input/touchscreen
         add:  "obj-$(CONFIG_TOUCHSCREEN_USBIRTOUCH_DT)	+= irtouchusb-dt.o"
     (c) modify Kconfig in kernel_imx/driver/input/touchscreen
         add:
         config TOUCHSCREEN_USBIRTOUCH_DT
                tristate "IRTOUCH USB Touchscreen Driver For single point"
                depends on USB_ARCH_HAS_HCD
                select USB
                help
                  Say Y here if you have a IRTOUCH based touchscreen
                  controller.
                  If unsure, say N.
                  To compile this driver as a module, choose M here: the
                  module will be called irtouch.
     (d)  You can make menuconfig select TOUCHSCREEN_USBIRTOUCH_DT and build kernel 
          Modify defconfig CONFIG_TOUCHSCREEN_USBIRTOUCH_DT=y
          example : imx6_rsb4410_android_kk44_defconfig
     (e)  Add one line to Android file system's ueventd.rc: 
          File path : device/fsl/imx6/etc/ueventd.freescale.rc  
          /dev/irtouch      0666   root    root
     (f)  Copy "Vendor_6615_Product_0081.idc" and "Vendor_6615_Product_0080.idc" file to the Android file system's /usr/idc directory.
 
 (5)  Calibration the Touchscreen
         Install CalibrationTools.apk and run "CalibrationTools" to start calibrate touchscreen. 
         package name:com.irtouch.android.calibration    
         class name:  CalibrationToolsActivity