Difference between revisions of "ROM-5780 user guide"

From ESS-WIKI
Jump to: navigation, search
Line 17: Line 17:
 
=== '''ROM-5620 接口布局圖 Board Dimension Layout ''' ===
 
=== '''ROM-5620 接口布局圖 Board Dimension Layout ''' ===
  
−
[[File:ROM-5620 module.PNG.jpg|RTENOTITLE]]
+
[[File:ROM-5780 module board.jpg]]
  
 
=== '''ROM-DB5901 接口布局圖 Board Dimension Layout''' ===
 
=== '''ROM-DB5901 接口布局圖 Board Dimension Layout''' ===

Revision as of 08:44, 20 December 2021

資源特性(Features)

  • Rockchip RK3399 Arm dual Cortex-A72 and quad Cortex-A53 1.8 GHz
  • Onboard 2GB LPDDR4 memory and 16GB eMMC
  • Support HDMI2.0 4K 60fps, 1x DP, 1x eDP, 1 x LVDS
  • Support 4K H.264/H.265 Video decoder
  • 2 x USB3.0, 3 x USB2.0,1 x USB2,0 OTG, 3 x UART, 12 x GPIO
  • 1 x PCIe2.0, 1 x SATA, 1 x 4-lane MIPI CSI, Gigabit LAN
  • Support Debian Linux and Android

訂購資訊(Ordering Information)

ROM-5780 orderinfo.jpg

接口布局和尺寸(Layout and Sizes)

ROM-5620 接口布局圖 Board Dimension Layout 

ROM-5780 module board.jpg

ROM-DB5901 接口布局圖 Board Dimension Layout

RTENOTITLE

RTENOTITLE


主板内置插针式引脚排序方式 (Pin Header defination) 

Internal I/O

RTENOTITLE

Position Description Connector Type
BAT1 PIN Header for Battery
 WAFER 8P 2.54mm 180D(M) DIP
A2543WV2-8P
BH1 RTC Battery Holder
 BATTERY HOLDER 24.9*23.4*8.9
CR2032 BH800.4GG
CAN1 CANBus Port 1
 BOX HEADER 5x2P 2.54mm 180D(M)
DIP 23N6960-10S10
CAN2 CANBus Port 2
 BOX HEADER 5x2P 2.54mm 180D(M)
DIP 23N6960-10S10
COM1 COM Port 1
 BOX HEADER 5x2P 2.54mm 180D(M)
DIP 23N6960-10S10
COM3 COM Port 3 (Debug Port)
 BOX HEADER 5x2P 2.54mm 180D(M)
DIP 23N6960-10S10
CN4 PCIex1 Connector 1
 PCIEXPRESS 36P 180D(F) DIP
2EG01817-D2D-DF
CN5 PCIex1 Connector 2
 PCIEXPRESS 36P 180D(F) DIP
2EG01817-D2D-DF
CN6 PCIex1 Connector 3
 PCIEXPRESS 36P 180D(F) DIP
2EG01817-D2D-DF
CN11 SATA Connector
 Serial ATA 7P 1.27mm 180D(M) DIP
WATM-07DBN4A3B8
CN12 SATA Power Connector
 WAFER 4P 2.5mm 180D(M) DIP
24W1161-04S10-01T
CN22 GPIOx8 sets
 PIN HEADER 10x2P 2.0mm 180D(M)
DIP 21N22050
CN25 MXM 3.0 Connector
 MXM Conn. 314P 90D(F) SMD
AS0B821-S78B-7H
CN26 M.2 Key E Slots
 NGFF 75P 0.5mm 90D(F) H=4.2mm
SMD AS0BC21-S40BE
CN38 FAN (Reserved) WTB Con. 3P 2.54mm 180D(M) DIP
A2543WV0-3P-6T-5e
CN39 MIPI-CSI1 (FPC, 4-Lane
 FPC 39P, 0.6mm, H0.9mm
CN40 MIPI-CSI0 (FPC, 2-Lane)
 FPC 39P, 0.6mm, H0.9mm
CN41 MIPI-CSI0 (Mini-SAS, 2-Lane)
 Mini SAS 36P/0.8mm/(M)/LCP/VA/G15u/
S/BK/W
CN42 MIPI-CSI1 (Mini-SAS, 4-Lane)
 Mini SAS 36P/0.8mm/(M)/LCP/VA/G15u/
S/BK/W
ESPI_CN1 ESPI
 PIN HEADER 6x2P 2.0mm180D(M) SMD
21N22050-12M00B
I2C_GP_1 I2C Pin Header
 WAFER BOX 4P 2.00mm 180D(M) DIP
721-81-04TW00
I2C_CN3 Audio Codec Board
 PIN HEADER 2x10P 2.54mm 180D(M)
DIP 21N22564
LVDS0 LVDS0
 Wafer 2x20P/1.25mm/(M)/NY9T/VA/GFL/
S/WH/W
LVDS_BK_PWR LVDS0 Back Light
 WAFER BOX 5P 2.0mm 180D(M) DIP
A2001WV2-5P
LVDS1 LVDS1
 Wafer 2x20P/1.25mm/(M)/NY9T/VA/GFL/
S/WH/W
LVDS1_BK_PWR LVDS1 Back Light
 WAFER BOX 5P 2.0mm 180D(M) DIP
A2001WV2-5P
SD1 SD Card Slot
 SD CARD 9P 90D(F) SMD WK2192CS3D-
7H
SPI_CN1 SPI Pin Header
 PIN HEADER 4x2P 2.54mm 180D(M)
SMD 21N22564
SW2 Reset Button
 TACT SW STS-091 SMD 4P H=3.8mm
SW4 SLP Button
 TACT SW STS-091 SMD 4P H=3.8mm
SW5 Power Button
 TACT SW STS-091 SMD 4P H=3.8mm
USB0_OTG1 USB OTG
 Micro USB 5P/0.65mm/(F)/NY9T/GFL/
RA/S/BK/B
USB-4-5 USB Port 4, Port 5
 PIN HEADER 2x5P 2.0mm 180D(M)
SMD 21N22050


Rear I/O 

RTENOTITLE

Position Description Name
DCIN DC Jack A
CN15A UART Port 0 B
CN15B UART Port 2 C
CN1A DP Port D
CN1B HDMI Port E
CN33 Type C Controller Programming Header (Reserved Only)
 F
CN34 USB Type C
 G
CN8
 GbE Ethernet Connector Port
 H
CN3 USB Port 1/ 2
 I
Audio1
 MIC Input/ Audio Output
 J

接口引脚定義 (Pin definitions)

机械尺寸  (Mechanical Characteristics)

ROM-5620 

RTENOTITLE

RTENOTITLE




快速入门 (Quick Start)

系统下载 (OS Download)

  • 'Linux系统 (Linux OS)'   
Version Date Product CPU Yocto3.0/Ubuntu18.04/Debian9 SDK Components Features Modules Test Report Release Release notes Comment
VA0271 2021-06-19 ROM-5620 
 8X Yocto3.0 SDK Components Features Modules Test Report 5.4.70 Alpha Release_Note QE test

Linux 燒錄方法 (Linux Flash eMMC Method)

使用Flash tool 燒錄鏡像到eMMC (Flash image into eMMC by Flash Tools) 

Step0: 檢查SD卡在Linux 環境的代號 (check SD card symbol in Linux system) 

RTENOTITLE

RTENOTITLE

Step1: 創造一張可開機的SD 卡 (Create a bootable SD card)

RTENOTITLE

Step2: 將可開機的SD 卡插入底板SD卡卡槽(Plug the SD card into Carrier board 's SD card slot)

 RTENOTITLE

Step 3: 確認開機選擇指撥開關 

           SD 卡開機模式:

           RTENOTITLE


Step 4:打開電源 和 終端機 (Turn on the Power & Terminal)

     RTENOTITLE


Step 5: 解壓縮flash tools 檔案,並複製到U盤中(Unzip the flash tools file , then copy to USB Disk) 

    解壓縮(Unzip the file ) 

         RTENOTITLE

 複製檔案到U盤中 (Copy the flash file to USB Disk) 

  1. 插入U盤到你的Ubuntu 電腦上 (Plug the USB Disk into you Linux PC

  2. 檢視U盤在Ubuntu 系統代號 (Check the USB Disk's symbol in Ubuntu System) 

       RTENOTITLE

       RTENOTITLE

 3. 掛載U盤在Ubuntu 系統中 

      RTENOTITLE


4. 複製檔案到 USBDISK 中

RTENOTITLE

5. 解除掛載 

      RTENOTITLE

Step 6  U盤 插入底板的 USB port 

RTENOTITLE

Step 7 .  複製 檔案到 根目錄 

             command : cp - a  5620A1AIM20LIV90185_iMX8X_flash_tool  /  

Step 8  使用腳本燒錄image 到 eMMC 

             command: ./mksd-linux.sh /dev/mmcblk0 

RTENOTITLE

Step 9 . 燒錄完畢後,移除SD Card , 

             請重新開機  ,Switch 1 請調整成  1 on , 其他 off  由 eMMC 開機

RTENOTITLE

 RTENOTITLE

Debug 串口調試 (Debug port Setting)

以 Tera Term  为例介绍如何使用串口调试功能 

   Baud Rate波特率：115200
   Data 数据位：8
   Parity 奇偶校验：无
   Stop 停止位：1
   Flow Control流控：无

Tera Term Tool 

RTENOTITLE

RTENOTITLE

Check the Sriel port in Device Manager (查看PC端的串口号)：

if you can not identify the Serial device , please check your serial driver. 

RTENOTITLE

Debug port connection (串口連接) 

RTENOTITLE


Log into Terminal  Tool (进入串口调试终端)：

RTENOTITLE

Linux系统的基本使用(Linux System Basic Operating Method)

      UUU 使用方法(USB Connection (OTG port))

      Display Setting (ROM-5620)

      U-boot Command :

                          setenv fdt_file xxxx.dtb
                          env save
                          boot 

  • Display: Default support g070vw01 LVDS panel on LVDS1
    • LVDS
      • g070vw01(LVDS1)
        • adv-imx8mxp-rom5620-a1.dtb  
      • g150xgel05
        • adv-imx8qxp-rom5620-a1-lvds-chimei.dtb
      • g215hvn01
        • adv-imx8qxp-rom5620-a1-lvds-dual.dtb
    • LVDS to HDMI(LVDS1)
      • adv-imx8qxp-rom5620-a1-hdmi-bridge.dtb
    • DSI to HDMI(LVDS1)
      • adv-imx8qxp-rom5620-a1-hdmi-bridge.dtb
    • DSI
      • auog101uan02
        • adv-imx8qxp-rom5620-a1-auog101uan02.dtb

乙太網路使用方法(Ethernent Testing Method)

Command : ifconfig 

RTENOTITLE

Command: Ping - I eth1 8.8.8.8  or Ping - I eth0 8.8.8.8  

RTENOTITLE

WiFi使用方法(WIFI Testing Method)

Command : 

# killall wpa_supplicant
# ifconfig wlan0 up
# wpa_passphrase "SSID" "PASSWORD" > /tmp/wpa.conf
# wpa_supplicant -BDwext -iwlan0 -c/tmp/wpa.conf
# udhcpc -b -i wlan0'''

ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=54 time=2.10 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=54 time=2.10 ms

RTENOTITLE

4G使用方法(4G Testing Method)

Command:
Test 4G: (EWM-C117FL06E - USB)
Step 1: Connect EWM-C117FL06E to Mini PCIE slot on 9680015491 and connect
the card to CN6 PCIe_D slot on ROM-DB5901.
Step 2: Connect the antenna 1750007990-01 to the SMA (F) connector on
9680015491
and connect the IPEX connector to MT1 on EWM-C117FL06E module.
Step 3: Connect the Mini USB cable from 9680015491 to USB 2.0 Type A port on
ROM-DB5901.
Step 4: Power on and execute the pppd command to connect to the network.

RTENOTITLE

RTENOTITLE

GPIO使用方法(GPIO Operating Method)

RTENOTITLE 


Loop-back Test (Take GPIO4 and GPIO5 as examples)  

Step 1: Connect GPIO4 and GPIO5
Step 2: Export GPIO interface

root@imx8qxprom5620a1 : ~# echo 456 > /sys/class/gpio/export
root@imx8qxprom5620a1 : ~# echo 452 > /sys/class/gpio/export

Step 3: Set direction

root@imx8qxprom5620a1 : ~# echo out > /sys/class/gpio/gpio1/direction
root@imx8qxprom5620a1 : ~# echo in > /sys/class/gpio/gpio2/direction

Step 4: Read value and set output value then check

root@imx8qxprom5620a1 : ~# cat /sys/class/gpio/gpio2/value
0r
oot@imx8qxprom5620a1 : ~# echo 1 > /sys/class/gpio/gpio1/value
root@imx8qxprom5620a1 : ~# cat /sys/class/gpio/gpio2/value
1

串口使用方法(Serial Port Operating Method)

RS-232 Test

SER1_UART2: /dev/ttyLP2: COM1

SER3_UART0: /dev/ttyLP0: COM3

SW6/7 Setting (SW6/7設置) 

RS232: 1:on  2:off

RS422: 1:on  2:on

RS485: 1:off  2:on

RTENOTITLE

COM0 (CN15A): UART1 test

Loopback Test (eg. ttyLP1)
UART 1: Change SW7 jumper to switch modes. (1ON 2OFF: RS-232)

UART 1: Change CN27~CN30 jumper to (1-2 short) 

# stty -F /dev/ttyLP1 -echo -onlcr 115200
# cat /dev/ttyLP1 &
# echo test > /dev/ttyLP1

蓝牙使用方法(BlueTooth Operating Method)

Command : 

$ hciconfig hci0 up
$ bluetoothctl
$ discoverable on
$ pairable on
$ scan on
[NEW] FC:18:3C:8D:75:F4 myphone
$ scan off
$ pair FC:18:3C:8D:75:F4
$ connect FC:18:3C:8D:75:F4

RTENOTITLE

  遠程訪問及文件傳輸(Remote Access and File Transimmion)

              查看主板IP位址 ( Chech IP Address )：​ 

        Command : ifconfig

RTENOTITLE

Windows下SSH访问及文件传输

SSH Remote Log into Device 

  • SSH远程登录,以putty选择putty.exe(或者使用Xshell、SecureCRT等类似软件)
  • 需要设置远程设备的IP、通讯端口(默认22)、通讯方式，登录后验证用户名密码


RTENOTITLE

RTENOTITLE


RTENOTITLE

RTENOTITLE

通用方法(General Method)

      查看CPU温度(Check CPU Temperature)

    root@imx8qxprom5620a1:/# cat /sys/devices/virtual/thermal/thermal_zone0/temp 44600

    # 或者直接以度爲單位顯示 echo $[$(cat /sys/class/thermal/thermal_zone0/temp)/1000]° >>> 45°

      查看CPU频率(Check CPU Frequency)

           cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq 
           >> 900000
           cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq    
           >> 1200000

      查看内存容量(Check Memory Capacity)

root@imx8qxprom5620a1:/# busybox free -m
             total       used       free     shared    buffers     cached
Mem:       1794920     516080    1278840      17252      9852        80292
-/+ buffers/cache:     425936    1368984
Swap:            0          0          0

      查看存储容量(Check Storage Capacity)

root@imx8qxprom5620a1:/# busybox df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/root                13.4G      1.7G     11.1G  13% /
devtmpfs                395.8M      4.0K    395.8M   0% /dev
tmpfs                   876.4M         0    876.4M   0% /dev/shm
tmpfs                   876.4M     16.5M    859.9M   2% /run
tmpfs                   876.4M         0    876.4M   0% /sys/fs/cgroup
tmpfs                   876.4M      4.0K    876.4M   0% /tmp
tmpfs                   876.4M    280.0K    876.2M   0% /var/volatile
/dev/mmcblk0p2           13.6G      1.7G     11.3G  13% /run/media/mmcblk0p2
/dev/mmcblk0p1           63.9M     23.4M     40.5M  37% /run/media/mmcblk0p1
/dev/mmcblk1p1           63.9M     23.4M     40.5M  37% /run/media/mmcblk1p1
tmpfs                   175.3M     88.0K    175.2M   0% /run/user/0
root@imx8qxprom5620a1:/#

      網路Ping測試(Ping Network Testing)

     ping 8.8.8.8
     PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
     64 bytes from 8.8.8.8: icmp_seq=1 ttl=54 time=2.10 ms
     64 bytes from 8.8.8.8: icmp_seq=2 ttl=54 time=2.10 ms

      設置RTC (RTC Setting) 

     root@imx8qxprom5620a1:/# systemctl stop ntpdate.service
     root@imx8qxprom5620a1:/# date 090816072021 && hwclock -w && date
             Wed Sep  8 16:07:00 UTC 2021
             Wed Sep  8 16:07:00 UTC 2021
     root@imx8qxprom5620a1:/# date
             Wed Sep  8 16:07:06 UTC 2021
     root@imx8qxprom5620a1:/#'''

         

Linux BSP編譯方法(Linux BSP Compile Method)

Yocto 3.0

如果有驗證上的錯誤 請使用以下的方法

### repo sync failed with Server certificate verification failed. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none
============================================================
export GIT_SSL_NO_VERIFY=1
#or
git config --global http.sslverify false
============================================================

Retrieved from "https://ess-wiki.advantech.com.tw/wiki/index.php?title=ROM-5780_user_guide&oldid=22828"