Difference between revisions of "IoTGateway/BSP/Linux/iMX6/FAQ"

Revision as of 07:32, 3 August 2016

i.MX6 Linux - Frequently Asked Questions

Please refer to the following sections for details

Please refer to the following sections for details

Getting Started / Build Instructions / To build linux kernel _{(LBV3) ( LBV5) (LBV6)}
Customization / Building & updating kernel/modules/dtb manually _{(LBV3) (LBV5) (LBV6)}

In Yocto Project, it is named boot splashscreen, please refer to the following sections for details

To build from prebuilt image, please refer to the following sections for details.

To build from BSP, please refer to the following sections for details.

Getting Started / Build Instructions / To build sdcard image _{(LBV3) (LBV5) (LBV6)}

@@ Line 27: / Line 27: @@
 In Yocto Project, it is named boot splashscreen, please refer to the following sections for details
 * Yocto Project Reference Manual / Other Tips. <sub>([https://www.yoctoproject.org/docs/1.5.1/ref-manual/ref-manual.html#usingpoky-debugging-others LBV3]) ([https://www.yoctoproject.org/docs/1.7/ref-manual/ref-manual.html#usingpoky-debugging-others LBV5]) ([https://www.yoctoproject.org/docs/1.8.1/ref-manual/ref-manual.html#usingpoky-debugging-others LBV6])</sub>
-===Get kernel configs from running OS===
-You can get the .config file in running Linux OS by the following command.
- # zcat /proc/config.gz > current.config
-Furthermore, this feature is enabled by ''CONFIG_IKCONFIG_PROC''.
 ==SDcard image==