Difference between revisions of "EPC-R3430 user guide"

From ESS-WIKI
Jump to: navigation, search
(Create sample for EPC-R3430)
 
Line 1: Line 1:
−
<h2><b>資源特性(Features)</b></h2>
 
  
−
<ul>
+
== '''資源特性(Features)''' ==
−
<li>NXP Arm&reg; Cortex&reg;-A53 i.MX8M Plus Quad/Dual up to 1.8 GHz</li>
 
−
<li>Onboard LPDDR4 4 GB / 6 GB, 4000MT/s memory</li>
 
−
<li>HDMI 1920x1080 at 60Hz, 1 Single or 1 Dual Channel 24 bit LVDS (or 1 4-Lane MIPI-DSI by BOM Option)</li>
 
−
<li>1 4-wire RS-232/422/485, 1 USB3.2 Gen1 By 1, 1 USB2.0, 1 Micro SD, 1 Mic. in / Line out</li>
 
−
<li>1 mini-PCIe for 3G/4G, 1 M.2 2230 Key E Slot</li>
 
−
<li>Supports Yocto Linux and Android</li>
 
−
<li>Support I/O Expansions boards by UIO40-Express</li>
 
−
</ul>
 
  
−
<h2><b>訂購資訊(Ordering Information)</b></h2>
+
*NXP ARM® Cortex®-A9 i.MX6 Dual 1GHz
 +
*On-board 1GB DDR3L and 4GB eMMC
 +
*HDMI
 +
*RS-232/422/485, 2 USB, 1 GbE
 +
*Mini-PCIe w/ Nano SIM socket for 3G/LTE
 +
*M.2 Key E, Type 2230 for Wi-Fi & BT
 +
*Micro SD socket
 +
*UIO40-Express expansion as 1 RS-485, 8 GPIO, 2 RS-232, 2nd LAN, CAN Bus
  
−
<p><img _fck_mw_filename="RSB-3430 orderinfo.PNG" _fck_mw_origimgheight="157" _fck_mw_origimgwidth="1308" alt="RTENOTITLE" src="/wiki/images/8/83/RSB-3430_orderinfo.PNG" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
== '''訂購資訊(Ordering Information)''' ==
  
−
<h2><b>规格（Specifications）</b></h2>
+
<img _fck_mw_filename="RSB-3430 orderinfo.PNG" _fck_mw_origimgheight="157" _fck_mw_origimgwidth="1308" alt="RTENOTITLE" src="/wiki/images/8/83/RSB-3430_orderinfo.PNG" style="vertical-align:middle;" title="RTENOTITLE" />
  
−
<h2><b>接口布局和尺寸(Layout and Sizes)</b></h2>
+
== '''规格（Specifications）''' ==
  
−
<h3><b>接口布局圖&nbsp;Board Dimension Layout&nbsp;</b></h3>
+
== '''接口布局和尺寸(Layout and Sizes)''' ==
  
−
<p><img _fck_mw_filename="RSB-3720 board review2021-10-21 144120.jpg" _fck_mw_origimgheight="347" _fck_mw_origimgwidth="462" alt="RTENOTITLE" src="/wiki/images/5/52/RSB-3720_board_review2021-10-21_144120.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
=== '''接口布局圖&nbsp;Board Dimension Layout&nbsp;''' ===
  
−
<p><img _fck_mw_filename="RSB-3720 connector location 2021-10-21 143853.jpg" _fck_mw_origimgheight="478" _fck_mw_origimgwidth="651" alt="RTENOTITLE" src="/wiki/images/4/41/RSB-3720_connector_location_2021-10-21_143853.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
<img _fck_mw_filename="RSB-3720 board review2021-10-21 144120.jpg" _fck_mw_origimgheight="347" _fck_mw_origimgwidth="462" alt="RTENOTITLE" src="/wiki/images/5/52/RSB-3720_board_review2021-10-21_144120.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
  
−
<p>&nbsp;</p>
+
<img _fck_mw_filename="RSB-3720 connector location 2021-10-21 143853.jpg" _fck_mw_origimgheight="478" _fck_mw_origimgwidth="651" alt="RTENOTITLE" src="/wiki/images/4/41/RSB-3720_connector_location_2021-10-21_143853.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
  
−
<p><img _fck_mw_filename="RSB-3720 connector location back 2021-10-21 144716.jpg" _fck_mw_origimgheight="381" _fck_mw_origimgwidth="492" alt="RTENOTITLE" src="/wiki/images/f/ff/RSB-3720_connector_location_back_2021-10-21_144716.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
&nbsp;
  
−
<p>&nbsp;</p>
+
<img _fck_mw_filename="RSB-3720 connector location back 2021-10-21 144716.jpg" _fck_mw_origimgheight="381" _fck_mw_origimgwidth="492" alt="RTENOTITLE" src="/wiki/images/f/ff/RSB-3720_connector_location_back_2021-10-21_144716.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
  
−
<h2><b>&nbsp;&#39;</b><i>Connector List&#39;</i></h2>
+
&nbsp;
  
−
<table border="1" cellpadding="1" cellspacing="1">
+
== '''&nbsp;''''''Connector List''' ==
−
<tbody>
 
−
<tr>
 
−
<td>BAT</td>
 
−
<td>RTC Battery Connector</td>
 
−
</tr>
 
−
<tr>
 
−
<td>BL1</td>
 
−
<td>LVDS Backlight 1&nbsp;</td>
 
−
</tr>
 
−
<tr>
 
−
<td>BL2</td>
 
−
<td>LVDS Backlight 2&nbsp;</td>
 
−
</tr>
 
−
<tr>
 
−
<td>COM1&nbsp;</td>
 
−
<td>COM + CAN Pin Header (default as debug console)&nbsp;</td>
 
−
</tr>
 
−
<tr>
 
−
<td>CSI1</td>
 
−
<td>MIPI-CSI Camera Input 1</td>
 
−
</tr>
 
−
<tr>
 
−
<td>CSI2</td>
 
−
<td>MIPI-CSI Camera Input 2&nbsp;</td>
 
−
</tr>
 
−
<tr>
 
−
<td>DCIN/DCIN 1</td>
 
−
<td>12V DC Power Inout by DC Jack / by Pin Header&nbsp;</td>
 
−
</tr>
 
−
<tr>
 
−
<td>HDMI&nbsp;</td>
 
−
<td>HDMI CONN</td>
 
−
</tr>
 
−
<tr>
 
−
<td>LAN1</td>
 
−
<td>Ethernet 1&nbsp;</td>
 
−
</tr>
 
−
<tr>
 
−
<td>LAN2&nbsp;</td>
 
−
<td>Ethernet 2</td>
 
−
</tr>
 
−
<tr>
 
−
<td>LOUT</td>
 
−
<td>Line Out Pin Header</td>
 
−
</tr>
 
−
<tr>
 
−
<td>LVDS</td>
 
−
<td>LVDS CONN.</td>
 
−
</tr>
 
−
<tr>
 
−
<td>M2</td>
 
−
<td>M.2 Key E CONN.</td>
 
−
</tr>
 
−
<tr>
 
−
<td>MIC</td>
 
−
<td>MIC In Pin Header</td>
 
−
</tr>
 
−
<tr>
 
−
<td>MPCIE</td>
 
−
<td>Mini-PCIe CONN.</td>
 
−
</tr>
 
−
<tr>
 
−
<td>RST</td>
 
−
<td>Rest Button</td>
 
−
</tr>
 
−
<tr>
 
−
<td>SD</td>
 
−
<td>SD Slot</td>
 
−
</tr>
 
−
<tr>
 
−
<td>UIO1&nbsp;</td>
 
−
<td>UIO40-Express Pin Header 1&nbsp;</td>
 
−
</tr>
 
−
<tr>
 
−
<td>UIO2&nbsp;</td>
 
−
<td>UIO40-Express Pin Header 2&nbsp;</td>
 
−
</tr>
 
−
<tr>
 
−
<td>USB1</td>
 
−
<td>USB CONN. (USB 3.2 Gen 1 on TOP + USB 2.0 on BOT)</td>
 
−
</tr>
 
−
</tbody>
 
−
</table>
 
  
−
<h3><b>接口引脚定義 (Pin definitions)</b></h3>
+
{| border="1" cellpadding="1" cellspacing="1"
 +
|-
 +
| <tbody>
 +
|-
 +
| BAT
 +
| RTC Battery Connector
 +
|-
 +
| BL1
 +
| LVDS Backlight 1&nbsp;
 +
|-
 +
| BL2
 +
| LVDS Backlight 2&nbsp;
 +
|-
 +
| COM1&nbsp;
 +
| COM + CAN Pin Header (default as debug console)&nbsp;
 +
|-
 +
| CSI1
 +
| MIPI-CSI Camera Input 1
 +
|-
 +
| CSI2
 +
| MIPI-CSI Camera Input 2&nbsp;
 +
|-
 +
| DCIN/DCIN 1
 +
| 12V DC Power Inout by DC Jack / by Pin Header&nbsp;
 +
|-
 +
| HDMI&nbsp;
 +
| HDMI CONN
 +
|-
 +
| LAN1
 +
| Ethernet 1&nbsp;
 +
|-
 +
| LAN2&nbsp;
 +
| Ethernet 2
 +
|-
 +
| LOUT
 +
| Line Out Pin Header
 +
|-
 +
| LVDS
 +
| LVDS CONN.
 +
|-
 +
| M2
 +
| M.2 Key E CONN.
 +
|-
 +
| MIC
 +
| MIC In Pin Header
 +
|-
 +
| MPCIE
 +
| Mini-PCIe CONN.
 +
|-
 +
| RST
 +
| Rest Button
 +
|-
 +
| SD
 +
| SD Slot
 +
|-
 +
| UIO1&nbsp;
 +
| UIO40-Express Pin Header 1&nbsp;
 +
|-
 +
| UIO2&nbsp;
 +
| UIO40-Express Pin Header 2&nbsp;
 +
|-
 +
| USB1
 +
| USB CONN. (USB 3.2 Gen 1 on TOP + USB 2.0 on BOT)
 +
|-
 +
| </tbody>
 +
|}
  
−
<ul>
+
=== '''接口引脚定義 (Pin definitions)''' ===
−
<li><a href="BLP1">BLP1&nbsp;</a></li>
 
−
<li><a href="BLP2">BLP2</a></li>
 
−
<li><a href="VDD1">VDD1</a></li>
 
−
<li><a href="SW1">SW1</a></li>
 
−
<li><a href="BAT%20%28RTC%20Battery%20CONN.%29">BAT (RTC Battery CONN.)</a></li>
 
−
<li><a href="BL1%20%28LVDS%20Backlight%201%29">BL1 (LVDS Backlight 1)</a></li>
 
−
<li><a href="BL2%20%28LVDS%20Backlight%202%29">BL2 (LVDS Backlight 2)</a></li>
 
−
<li><a href="COM1%20%28COM%20%2B%20CAN%20Pin%20Header%29%3A%20%28default%20as%20debug%20console%29">COM1 (COM + CAN Pin Header): (default as debug console)</a></li>
 
−
<li><a href="CSI1%20%28MIPI-CSI%20Camera%20Input%201%29">CSI1 (MIPI-CSI Camera Input 1)</a></li>
 
−
<li><a href="CSI2%20%28MIPI-CSI%20Camera%20Input%202%29">CSI2 (MIPI-CSI Camera Input 2)</a></li>
 
−
<li><a href="DCIN%2F%20DCIN1%20%2812V%20DC%20Power%20Input%20by%20DC%20Jack%2F%20by%20Pin%20Header%29">DCIN/ DCIN1 (12V DC Power Input by DC Jack/ by Pin Header)</a></li>
 
−
<li><a href="HDMI%20%28HDMI%20CONN.%29">HDMI (HDMI CONN.)</a></li>
 
−
<li><a href="LAN1%20%28Ethernet%20eth0%29">LAN1 (Ethernet eth0)</a></li>
 
−
<li><a href="LAN2%20%28Ethernet%20eth1%29">LAN2 (Ethernet eth1)</a></li>
 
−
<li><a href="LOUT%20%28Line%20Out%20Pin%20Header%29">LOUT (Line Out Pin Header)</a></li>
 
−
<li><a href="LVDS%20%28LVDS%20CONN.%29">LVDS (LVDS CONN.)</a></li>
 
−
<li><a href="M2%20%28M.2%20Key%20E%20CONN.%29">M2 (M.2 Key E CONN.)</a></li>
 
−
<li><a href="MIC%20%28MIC%20In%20Pin%20Header%29">MIC (MIC In Pin Header)</a></li>
 
−
<li><a href="MPCIE%20%28Mini-PCIe%20CONN.%29">MPCIE (Mini-PCIe CONN.)</a></li>
 
−
<li><a href="RST%20%28Reset%20Button%29">RST (Reset Button)</a></li>
 
−
<li><a href="SD%20%28SD%20Slot%29">SD (SD Slot)</a></li>
 
−
<li><a href="SIM%20%28SIM%20Slot%29">SIM (SIM Slot)</a></li>
 
−
<li><a href="UIO1%20%28UIO40-Express%20Pin%20Header%201%29">UIO1 (UIO40-Express Pin Header 1)</a></li>
 
−
<li><a href="UIO2%20%28UIO40-Express%20Pin%20Header%202%29">UIO2 (UIO40-Express Pin Header 2)</a></li>
 
−
<li><a href="USB%201%20%28USB%203.2%20Gen%201%20on%20TOP%20%2B%20USB%202.0%20on%20BOT%29">USB 1 (USB 3.2 Gen 1 on TOP + USB 2.0 on BOT)</a></li>
 
−
<li><a href="LED">LED</a></li>
 
−
</ul>
 
  
−
<h3><b>&nbsp;机械尺寸&nbsp; (</b>Mechanical Characteristics)</h3>
+
*<a href="BLP1">BLP1&nbsp;</a>
 +
*<a href="BLP2">BLP2</a>
 +
*<a href="VDD1">VDD1</a>
 +
*<a href="SW1">SW1</a>
 +
*<a href="BAT%20%28RTC%20Battery%20CONN.%29">BAT (RTC Battery CONN.)</a>
 +
*<a href="BL1%20%28LVDS%20Backlight%201%29">BL1 (LVDS Backlight 1)</a>
 +
*<a href="BL2%20%28LVDS%20Backlight%202%29">BL2 (LVDS Backlight 2)</a>
 +
*<a href="COM1%20%28COM%20%2B%20CAN%20Pin%20Header%29%3A%20%28default%20as%20debug%20console%29">COM1 (COM + CAN Pin Header): (default as debug console)</a>
 +
*<a href="CSI1%20%28MIPI-CSI%20Camera%20Input%201%29">CSI1 (MIPI-CSI Camera Input 1)</a>
 +
*<a href="CSI2%20%28MIPI-CSI%20Camera%20Input%202%29">CSI2 (MIPI-CSI Camera Input 2)</a>
 +
*<a href="DCIN%2F%20DCIN1%20%2812V%20DC%20Power%20Input%20by%20DC%20Jack%2F%20by%20Pin%20Header%29">DCIN/ DCIN1 (12V DC Power Input by DC Jack/ by Pin Header)</a>
 +
*<a href="HDMI%20%28HDMI%20CONN.%29">HDMI (HDMI CONN.)</a>
 +
*<a href="LAN1%20%28Ethernet%20eth0%29">LAN1 (Ethernet eth0)</a>
 +
*<a href="LAN2%20%28Ethernet%20eth1%29">LAN2 (Ethernet eth1)</a>
 +
*<a href="LOUT%20%28Line%20Out%20Pin%20Header%29">LOUT (Line Out Pin Header)</a>
 +
*<a href="LVDS%20%28LVDS%20CONN.%29">LVDS (LVDS CONN.)</a>
 +
*<a href="M2%20%28M.2%20Key%20E%20CONN.%29">M2 (M.2 Key E CONN.)</a>
 +
*<a href="MIC%20%28MIC%20In%20Pin%20Header%29">MIC (MIC In Pin Header)</a>
 +
*<a href="MPCIE%20%28Mini-PCIe%20CONN.%29">MPCIE (Mini-PCIe CONN.)</a>
 +
*<a href="RST%20%28Reset%20Button%29">RST (Reset Button)</a>
 +
*<a href="SD%20%28SD%20Slot%29">SD (SD Slot)</a>
 +
*<a href="SIM%20%28SIM%20Slot%29">SIM (SIM Slot)</a>
 +
*<a href="UIO1%20%28UIO40-Express%20Pin%20Header%201%29">UIO1 (UIO40-Express Pin Header 1)</a>
 +
*<a href="UIO2%20%28UIO40-Express%20Pin%20Header%202%29">UIO2 (UIO40-Express Pin Header 2)</a>  
 +
*<a href="USB%201%20%28USB%203.2%20Gen%201%20on%20TOP%20%2B%20USB%202.0%20on%20BOT%29">USB 1 (USB 3.2 Gen 1 on TOP + USB 2.0 on BOT)</a>
 +
*<a href="LED">LED</a>  
  
−
<p><img _fck_mw_filename="RSB-3720 board Dimensions 2021-10-21 145827.jpg" _fck_mw_origimgheight="497" _fck_mw_origimgwidth="577" alt="RTENOTITLE" src="/wiki/images/a/af/RSB-3720_board_Dimensions_2021-10-21_145827.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
=== '''&nbsp;机械尺寸&nbsp; ('''Mechanical Characteristics) ===
  
−
<h2><b>快速入门 (Quick Start)</b></h2>
+
<img _fck_mw_filename="RSB-3720 board Dimensions 2021-10-21 145827.jpg" _fck_mw_origimgheight="497" _fck_mw_origimgwidth="577" alt="RTENOTITLE" src="/wiki/images/a/af/RSB-3720_board_Dimensions_2021-10-21_145827.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
  
−
<h3><b>系统下载 (OS Download)</b></h3>
+
== '''快速入门 (Quick Start)''' ==
  
−
<p>&#39;<i>Linux系统 (Linux OS)&#39;</i><b>&nbsp; &nbsp;</b></p>
+
=== '''系统下载 (OS Download)''' ===
  
−
<table border="1" cellpadding="0" cellspacing="0">
+
'''Linux系统 (Linux OS)''''''&nbsp; &nbsp;'''
−
<tbody>
 
−
<tr>
 
−
<td>
 
−
<p><b>Git BSP Tag Version</b></p>
 
−
</td>
 
−
<td>
 
−
<p><b>Product</b></p>
 
−
</td>
 
−
<td>&nbsp;<b>BSP/Image</b></td>
 
−
<td>
 
−
<p><b>Date</b></p>
 
−
</td>
 
−
<td>
 
−
<p><b>Alpha Release</b></p>
 
−
</td>
 
−
<td>
 
−
<p><b>Beta Release</b></p>
 
−
</td>
 
−
<td>
 
−
<p><b>MP Release</b></p>
 
−
</td>
 
−
<td>
 
−
<p><b>Release Note</b></p>
 
−
</td>
 
−
<td>
 
−
<p><b>Comment</b></p>
 
−
</td>
 
−
<td>
 
−
<p><b>Release Owner</b></p>
 
−
</td>
 
−
</tr>
 
−
<tr>
 
−
<td>imx6LBV90146</td>
 
−
<td>RSB-3430A1</td>
 
−
<td>&nbsp;3430A1AIM20LIV90146_DualQuad_2021-08-08.img.gz</td>
 
−
<td>2021-08-08</td>
 
−
<td>V</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
<td>&nbsp;</td>
 
−
</tr>
 
−
</tbody>
 
−
</table>
 
  
−
<p>&nbsp;</p>
+
{| border="1" cellpadding="0" cellspacing="0"
 +
|-
 +
| <tbody>
 +
|-
 +
|
 +
'''Git BSP Tag Version'''
  
−
<ul>
+
|
−
<li><b><a alt="https://pan.baidu.com/s/1fP5BGOOiDv5qV-3oTQmyow" href="https://pan.baidu.com/s/1fP5BGOOiDv5qV-3oTQmyow" title="https://pan.baidu.com/s/1fP5BGOOiDv5qV-3oTQmyow">Baidu link for imx6 Yocto 2.5 BSP and Image</a>&nbsp;Password：ra18</b></li>
+
'''Product'''
−
<li><b><a alt="https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0" href="https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0" title="https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0">Dropbox link for imx6 Yocto 2.5 BSP and Image</a></b></li>
 
−
<li><a alt="https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0&amp;lst=&amp;preview=downloads_imx6-2.5.tgz" href="https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0&amp;lst=&amp;preview=downloads_imx6-2.5.tgz" title="https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0&amp;lst=&amp;preview=downloads_imx6-2.5.tgz"><b>Downloads 2.5</b></a></li>
 
−
</ul>
 
  
−
<p>&nbsp; &nbsp;</p>
+
| &nbsp;'''BSP/Image'''
 +
|
 +
'''Date'''
  
−
<h2><b>&nbsp;Linux&nbsp;燒錄方法 (Linux Flash eMMC Method)</b></h2>
+
|
 +
'''Alpha Release'''
  
−
<p><b>1. 確認SD 在Ubuntu 電腦中的代號</b></p>
+
|
 +
'''Beta Release'''
  
−
<p><b><img _fck_mw_filename="RSB-3430 Check SDCard 2021-10-26 134232.jpg" _fck_mw_origimgheight="22" _fck_mw_origimgwidth="677" alt="RTENOTITLE" src="/wiki/images/2/21/RSB-3430_Check_SDCard_2021-10-26_134232.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></b></p>
+
|
 +
'''MP Release'''
  
−
<p><b><img _fck_mw_filename="RSB-3430 SDCardInfo 2021-10-26 134323.jpg" _fck_mw_origimgheight="191" _fck_mw_origimgwidth="583" alt="RTENOTITLE" src="/wiki/images/5/55/RSB-3430_SDCardInfo_2021-10-26_134323.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></b></p>
+
|
 +
'''Release Note'''
  
−
<p><b>2. 先將鏡像燒錄到SD Card 中( Create a bootable SD card )&nbsp;</b></p>
+
|
 +
'''Comment'''
  
−
<p>&#39;<i><img _fck_mw_filename="RSB-3430 dd SDcard 2021-10-26 134535.jpg" _fck_mw_origimgheight="46" _fck_mw_origimgwidth="1267" alt="RTENOTITLE" src="/wiki/images/1/15/RSB-3430_dd_SDcard_2021-10-26_134535.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></i></p>
+
|
 +
'''Release Owner'''
  
−
<p>&nbsp;</p>
+
|-
 +
| imx6LBV90146
 +
| RSB-3430A1
 +
| &nbsp;3430A1AIM20LIV90146_DualQuad_2021-08-08.img.gz
 +
| 2021-08-08
 +
| V
 +
| &nbsp;
 +
| &nbsp;
 +
| &nbsp;
 +
| &nbsp;
 +
| &nbsp;
 +
|-
 +
| </tbody>
 +
|}
  
−
<p>&nbsp;</p>
+
&nbsp;
  
−
<p><b><img _fck_mw_filename="RSB-3430 SDCard info 2 2021-10-26 134939.jpg" _fck_mw_origimgheight="87" _fck_mw_origimgwidth="1243" alt="RTENOTITLE" src="/wiki/images/5/54/RSB-3430_SDCard_info_2_2021-10-26_134939.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></b></p>
+
*'''<a alt="[https://pan.baidu.com/s/1fP5BGOOiDv5qV-3oTQmyow https://pan.baidu.com/s/1fP5BGOOiDv5qV-3oTQmyow]" href="[https://pan.baidu.com/s/1fP5BGOOiDv5qV-3oTQmyow https://pan.baidu.com/s/1fP5BGOOiDv5qV-3oTQmyow]" title="[https://pan.baidu.com/s/1fP5BGOOiDv5qV-3oTQmyow https://pan.baidu.com/s/1fP5BGOOiDv5qV-3oTQmyow]">Baidu link for imx6 Yocto 2.5 BSP and Image</a>&nbsp;Password：ra18'''
 +
*'''<a alt="[https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0 https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0]" href="[https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0 https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0]" title="[https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0 https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0]">Dropbox link for imx6 Yocto 2.5 BSP and Image</a>'''
 +
*<a alt="[https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0&lst=&preview=downloads_imx6-2.5.tgz https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0&lst=&preview=downloads_imx6-2.5.tgz]" href="[https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0&lst=&preview=downloads_imx6-2.5.tgz https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0&lst=&preview=downloads_imx6-2.5.tgz]" title="[https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0&lst=&preview=downloads_imx6-2.5.tgz https://www.dropbox.com/sh/910ji9j8p2u1s52/AACSUfK4JFXRT5gDi1Od8V07a?dl=0&lst=&preview=downloads_imx6-2.5.tgz]">'''Downloads 2.5'''</a>  
  
−
<p><b>3.設定終端機(Set Debug Terminal)&nbsp;</b></p>
+
&nbsp; &nbsp;
  
−
<p>Debug 串口調試 (Debug port Setting)</p>
+
== '''&nbsp;Linux&nbsp;燒錄方法 (Linux Flash eMMC Method)''' ==
  
−
<p>以 Tera Term&nbsp;&nbsp;为例介绍如何使用串口调试功能</p>
+
'''1. 確認SD 在Ubuntu 電腦中的代號'''
  
−
<pre>
+
'''<img _fck_mw_filename="RSB-3430 Check SDCard 2021-10-26 134232.jpg" _fck_mw_origimgheight="22" _fck_mw_origimgwidth="677" alt="RTENOTITLE" src="/wiki/images/2/21/RSB-3430_Check_SDCard_2021-10-26_134232.jpg" style="vertical-align:middle;" title="RTENOTITLE" />'''
−
  Baud Rate波特率：115200
+
 
 +
'''<img _fck_mw_filename="RSB-3430 SDCardInfo 2021-10-26 134323.jpg" _fck_mw_origimgheight="191" _fck_mw_origimgwidth="583" alt="RTENOTITLE" src="/wiki/images/5/55/RSB-3430_SDCardInfo_2021-10-26_134323.jpg" style="vertical-align:middle;" title="RTENOTITLE" />'''
 +
 
 +
'''2. 先將鏡像燒錄到SD Card 中( Create a bootable SD card )&nbsp;'''
 +
 
 +
'''<img _fck_mw_filename="RSB-3430 dd SDcard 2021-10-26 134535.jpg" _fck_mw_origimgheight="46" _fck_mw_origimgwidth="1267" alt="RTENOTITLE" src="/wiki/images/1/15/RSB-3430_dd_SDcard_2021-10-26_134535.jpg" style="vertical-align:middle;" title="RTENOTITLE" />''
 +
 
 +
&nbsp;
 +
 
 +
&nbsp;
 +
 
 +
'''<img _fck_mw_filename="RSB-3430 SDCard info 2 2021-10-26 134939.jpg" _fck_mw_origimgheight="87" _fck_mw_origimgwidth="1243" alt="RTENOTITLE" src="/wiki/images/5/54/RSB-3430_SDCard_info_2_2021-10-26_134939.jpg" style="vertical-align:middle;" title="RTENOTITLE" />'''
 +
 
 +
'''3.設定終端機(Set Debug Terminal)&nbsp;'''
 +
 
 +
Debug 串口調試 (Debug port Setting)
 +
 
 +
以 Tera Term&nbsp;&nbsp;为例介绍如何使用串口调试功能
 +
<pre>   Baud Rate波特率：115200
 
   Data 数据位：8
 
   Data 数据位：8
 
   Parity 奇偶校验：无
 
   Parity 奇偶校验：无
Line 247: Line 223:
 
   Flow Control流控：无</pre>
 
   Flow Control流控：无</pre>
  
−
<dl>
+
:&nbsp;  
−
<dd>&nbsp;</dd>
 
−
</dl>
 
−
 
 
−
<p>Tera Term Tool&nbsp;</p>
 
  
−
<p><img _fck_mw_filename="TeraTerm 2021-09-10 140930n.jpg" _fck_mw_origimgheight="428" _fck_mw_origimgwidth="700" alt="RTENOTITLE" src="/wiki/images/2/25/TeraTerm_2021-09-10_140930n.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
Tera Term Tool&nbsp;
  
−
<p><img _fck_mw_filename="TeraTerm12021-09-10 141114n.jpg" _fck_mw_origimgheight="391" _fck_mw_origimgwidth="609" alt="RTENOTITLE" src="/wiki/images/6/6d/TeraTerm12021-09-10_141114n.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
<img _fck_mw_filename="TeraTerm 2021-09-10 140930n.jpg" _fck_mw_origimgheight="428" _fck_mw_origimgwidth="700" alt="RTENOTITLE" src="/wiki/images/2/25/TeraTerm_2021-09-10_140930n.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
  
−
<p>Check the Sriel port in Device Manager (查看PC端的串口号)：</p>
+
<img _fck_mw_filename="TeraTerm12021-09-10 141114n.jpg" _fck_mw_origimgheight="391" _fck_mw_origimgwidth="609" alt="RTENOTITLE" src="/wiki/images/6/6d/TeraTerm12021-09-10_141114n.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
  
−
<p>if you can not identify the Serial device , please check your serial driver.&nbsp;</p>
+
Check the Sriel port in Device Manager (查看PC端的串口号)：
  
−
<p><img _fck_mw_filename="COMportinx862021-09-10 141610.jpg" _fck_mw_origimgheight="640" _fck_mw_origimgwidth="588" alt="RTENOTITLE" src="/wiki/images/9/99/COMportinx862021-09-10_141610.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
if you can not identify the Serial device , please check your serial driver.&nbsp;
  
−
<p><b>4. 將SD card 插入機器&nbsp;</b></p>
+
<img _fck_mw_filename="COMportinx862021-09-10 141610.jpg" _fck_mw_origimgheight="640" _fck_mw_origimgwidth="588" alt="RTENOTITLE" src="/wiki/images/9/99/COMportinx862021-09-10_141610.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
  
−
<p>&nbsp;&nbsp;<img _fck_mw_filename="RSB-3430 plugSD Card3 24240133.jpg" _fck_mw_origimgheight="739" _fck_mw_origimgwidth="554" alt="RTENOTITLE" src="/wiki/images/9/9a/RSB-3430_plugSD_Card3_24240133.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
'''4. 將SD card 插入機器&nbsp;'''
  
−
<p><b>5. 檢查撥碼開關&nbsp; ( 1 ON , 2 OFF)&nbsp;</b></p>
+
&nbsp;&nbsp;<img _fck_mw_filename="RSB-3430 plugSD Card3 24240133.jpg" _fck_mw_origimgheight="739" _fck_mw_origimgwidth="554" alt="RTENOTITLE" src="/wiki/images/9/9a/RSB-3430_plugSD_Card3_24240133.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
  
−
<p><b><img _fck_mw_filename="RSB-3430 Switch 24240134.jpg" _fck_mw_origimgheight="554" _fck_mw_origimgwidth="739" alt="RTENOTITLE" src="/wiki/images/3/32/RSB-3430_Switch_24240134.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></b></p>
+
'''5. 檢查撥碼開關&nbsp; ( 1 ON , 2 OFF)&nbsp;'''
  
−
<p><b>6. 接上Debug Cable&nbsp;</b></p>
+
'''<img _fck_mw_filename="RSB-3430 Switch 24240134.jpg" _fck_mw_origimgheight="554" _fck_mw_origimgwidth="739" alt="RTENOTITLE" src="/wiki/images/3/32/RSB-3430_Switch_24240134.jpg" style="vertical-align:middle;" title="RTENOTITLE" />'''
  
−
<p><img _fck_mw_filename="RSB-3430 Debug port 24240136.jpg" _fck_mw_origimgheight="554" _fck_mw_origimgwidth="739" alt="RTENOTITLE" src="/wiki/images/4/46/RSB-3430_Debug_port_24240136.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
'''6. 接上Debug Cable&nbsp;'''
  
−
<p><b>7. 打開電源&nbsp;</b></p>
+
<img _fck_mw_filename="RSB-3430 Debug port 24240136.jpg" _fck_mw_origimgheight="554" _fck_mw_origimgwidth="739" alt="RTENOTITLE" src="/wiki/images/4/46/RSB-3430_Debug_port_24240136.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
  
−
<p><img _fck_mw_filename="RSB-3430 turnonpower 24240137.jpg" _fck_mw_origimgheight="554" _fck_mw_origimgwidth="739" alt="RTENOTITLE" src="/wiki/images/1/19/RSB-3430_turnonpower_24240137.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
'''7. 打開電源&nbsp;'''
  
−
<p><b>8. 由終端機進入系統&nbsp;</b></p>
+
<img _fck_mw_filename="RSB-3430 turnonpower 24240137.jpg" _fck_mw_origimgheight="554" _fck_mw_origimgwidth="739" alt="RTENOTITLE" src="/wiki/images/1/19/RSB-3430_turnonpower_24240137.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
  
−
<p><b><img _fck_mw_filename="RSB-3430 Debug terminal 2021-10-26 141124.jpg" _fck_mw_origimgheight="461" _fck_mw_origimgwidth="800" alt="RTENOTITLE" src="/wiki/images/6/60/RSB-3430_Debug_terminal_2021-10-26_141124.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></b></p>
+
'''8. 由終端機進入系統&nbsp;'''
  
−
<p><b>9. 燒錄鏡像到 eMMC flash&nbsp;</b></p>
+
'''<img _fck_mw_filename="RSB-3430 Debug terminal 2021-10-26 141124.jpg" _fck_mw_origimgheight="461" _fck_mw_origimgwidth="800" alt="RTENOTITLE" src="/wiki/images/6/60/RSB-3430_Debug_terminal_2021-10-26_141124.jpg" style="vertical-align:middle;" title="RTENOTITLE" />'''
  
−
<p><b>將3430A1AIM20LIV90146_DualQuad_flash_tool.tgz 複製到U盤中,插入機器的USB Port&nbsp;</b></p>
+
'''9. 燒錄鏡像到 eMMC flash&nbsp;'''
  
−
<p><b><img _fck_mw_filename="RSB-3430 Cpfile toUsb 2021-10-26 141813.jpg" _fck_mw_origimgheight="158" _fck_mw_origimgwidth="503" alt="RTENOTITLE" src="/wiki/images/d/d0/RSB-3430_Cpfile_toUsb_2021-10-26_141813.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></b></p>
+
'''將3430A1AIM20LIV90146_DualQuad_flash_tool.tgz 複製到U盤中,插入機器的USB Port&nbsp;'''
  
−
<p><b>在系統中 ,確認USB中燒錄資料&nbsp;</b></p>
+
'''<img _fck_mw_filename="RSB-3430 Cpfile toUsb 2021-10-26 141813.jpg" _fck_mw_origimgheight="158" _fck_mw_origimgwidth="503" alt="RTENOTITLE" src="/wiki/images/d/d0/RSB-3430_Cpfile_toUsb_2021-10-26_141813.jpg" style="vertical-align:middle;" title="RTENOTITLE" />'''
  
−
<p><b><img _fck_mw_filename="RSB-3430 USB IN Device 2021-10-26 142038.jpg" _fck_mw_origimgheight="96" _fck_mw_origimgwidth="727" alt="RTENOTITLE" src="/wiki/images/0/0c/RSB-3430_USB_IN_Device_2021-10-26_142038.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></b></p>
+
'''在系統中 ,確認USB中燒錄資料&nbsp;'''
  
−
<p><img _fck_mw_filename="RSB-3430 CP file into root 2021-10-26 143316.jpg" _fck_mw_origimgheight="46" _fck_mw_origimgwidth="806" alt="RTENOTITLE" src="/wiki/images/d/d9/RSB-3430_CP_file_into_root_2021-10-26_143316.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
'''<img _fck_mw_filename="RSB-3430 USB IN Device 2021-10-26 142038.jpg" _fck_mw_origimgheight="96" _fck_mw_origimgwidth="727" alt="RTENOTITLE" src="/wiki/images/0/0c/RSB-3430_USB_IN_Device_2021-10-26_142038.jpg" style="vertical-align:middle;" title="RTENOTITLE" />'''
  
−
<p><b>在根目錄下 ,解壓縮&nbsp;</b></p>
+
<img _fck_mw_filename="RSB-3430 CP file into root 2021-10-26 143316.jpg" _fck_mw_origimgheight="46" _fck_mw_origimgwidth="806" alt="RTENOTITLE" src="/wiki/images/d/d9/RSB-3430_CP_file_into_root_2021-10-26_143316.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
  
−
<p><img _fck_mw_filename="RSB-3430 Unzip file in root 2021-10-26 143506.jpg" _fck_mw_origimgheight="231" _fck_mw_origimgwidth="810" alt="RTENOTITLE" src="/wiki/images/c/c5/RSB-3430_Unzip_file_in_root_2021-10-26_143506.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
'''在根目錄下 ,解壓縮&nbsp;'''
  
−
<p><b>在mk_Inand 資料夾中執行 ./mksd-linux.sh&nbsp;</b></p>
+
<img _fck_mw_filename="RSB-3430 Unzip file in root 2021-10-26 143506.jpg" _fck_mw_origimgheight="231" _fck_mw_origimgwidth="810" alt="RTENOTITLE" src="/wiki/images/c/c5/RSB-3430_Unzip_file_in_root_2021-10-26_143506.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
  
−
<p><img _fck_mw_filename="RSB-3430 check file 2021-10-26 143952.jpg" _fck_mw_origimgheight="140" _fck_mw_origimgwidth="807" alt="RTENOTITLE" src="/wiki/images/8/87/RSB-3430_check_file_2021-10-26_143952.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
'''在mk_Inand 資料夾中執行 ./mksd-linux.sh&nbsp;'''
  
−
<p><img _fck_mw_filename="RSB-3430 mksd linuxsh 2021-10-26 143855.jpg" _fck_mw_origimgheight="241" _fck_mw_origimgwidth="815" alt="RTENOTITLE" src="/wiki/images/d/d0/RSB-3430_mksd_linuxsh_2021-10-26_143855.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
<img _fck_mw_filename="RSB-3430 check file 2021-10-26 143952.jpg" _fck_mw_origimgheight="140" _fck_mw_origimgwidth="807" alt="RTENOTITLE" src="/wiki/images/8/87/RSB-3430_check_file_2021-10-26_143952.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
  
−
<p><img _fck_mw_filename="RSB-3430 flash image done 2021-10-26 144801.jpg" _fck_mw_origimgheight="290" _fck_mw_origimgwidth="801" alt="RTENOTITLE" src="/wiki/images/2/29/RSB-3430_flash_image_done_2021-10-26_144801.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
<img _fck_mw_filename="RSB-3430 mksd linuxsh 2021-10-26 143855.jpg" _fck_mw_origimgheight="241" _fck_mw_origimgwidth="815" alt="RTENOTITLE" src="/wiki/images/d/d0/RSB-3430_mksd_linuxsh_2021-10-26_143855.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
  
−
<p><b>10. 移除SD 卡,從eMMC 開機.&nbsp;</b></p>
+
<img _fck_mw_filename="RSB-3430 flash image done 2021-10-26 144801.jpg" _fck_mw_origimgheight="290" _fck_mw_origimgwidth="801" alt="RTENOTITLE" src="/wiki/images/2/29/RSB-3430_flash_image_done_2021-10-26_144801.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
  
−
<p><img _fck_mw_filename="RSB-3430 boot from eMMC 2021-10-27 091349.jpg" _fck_mw_origimgheight="477" _fck_mw_origimgwidth="1018" alt="RTENOTITLE" src="/wiki/images/d/d9/RSB-3430_boot_from_eMMC_2021-10-27_091349.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
'''10. 移除SD 卡,從eMMC 開機.&nbsp;'''
  
−
<h2><b>&nbsp;</b></h2>
+
<img _fck_mw_filename="RSB-3430 boot from eMMC 2021-10-27 091349.jpg" _fck_mw_origimgheight="477" _fck_mw_origimgwidth="1018" alt="RTENOTITLE" src="/wiki/images/d/d9/RSB-3430_boot_from_eMMC_2021-10-27_091349.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
  
−
<h2><b>Linux系统的基本使用(Linux&nbsp;System Basic Operating Method)</b></h2>
+
== '''&nbsp;''' ==
  
−
<h3><b>載入預設值由uboot 設定(Load Default Setting in Uboot )</b></h3>
+
== '''Linux系统的基本使用(Linux&nbsp;System Basic Operating Method)''' ==
  
−
<p><b>1. 開機時 在五秒內按下空白鍵 ,進入Uboot&nbsp;</b></p>
+
=== '''載入預設值由uboot 設定(Load Default Setting in Uboot )''' ===
  
−
<p><b>2. Command&nbsp;:&nbsp;</b></p>
+
'''1. 開機時 在五秒內按下空白鍵 ,進入Uboot&nbsp;'''
  
−
<p><b>&nbsp; &nbsp; env default -a&nbsp;</b></p>
+
'''2. Command&nbsp;:&nbsp;'''
  
−
<p><b>&nbsp; &nbsp; saveenv&nbsp;</b></p>
+
'''&nbsp; &nbsp; env default -a&nbsp;'''
  
−
<p><b>&nbsp; &nbsp; reset&nbsp; &nbsp;</b></p>
+
'''&nbsp; &nbsp; saveenv&nbsp;'''
  
−
<p><b><img _fck_mw_filename="RSB-3430 Load default 2021-10-27 091752.jpg" _fck_mw_origimgheight="487" _fck_mw_origimgwidth="1025" alt="RTENOTITLE" src="/wiki/images/2/22/RSB-3430_Load_default_2021-10-27_091752.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></b></p>
+
'''&nbsp; &nbsp; reset&nbsp; &nbsp;'''
  
−
<h3><b>顯示設定 (Display&nbsp; Setting )&nbsp;</b></h3>
+
'''<img _fck_mw_filename="RSB-3430 Load default 2021-10-27 091752.jpg" _fck_mw_origimgheight="487" _fck_mw_origimgwidth="1025" alt="RTENOTITLE" src="/wiki/images/2/22/RSB-3430_Load_default_2021-10-27_091752.jpg" style="vertical-align:middle;" title="RTENOTITLE" />'''
  
−
<p><b>&nbsp;預設值為: HDMI 輸出</b></p>
+
=== '''顯示設定 (Display&nbsp; Setting )&nbsp;''' ===
  
−
<p><b><img _fck_mw_filename="RSB-3420 uboot default 2021-10-27 135059.jpg" _fck_mw_origimgheight="625" _fck_mw_origimgwidth="1332" alt="RTENOTITLE" src="/wiki/images/2/2a/RSB-3420_uboot_default_2021-10-27_135059.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></b></p>
+
'''&nbsp;預設值為: HDMI 輸出'''
  
−
<p>&nbsp;</p>
+
'''<img _fck_mw_filename="RSB-3420 uboot default 2021-10-27 135059.jpg" _fck_mw_origimgheight="625" _fck_mw_origimgwidth="1332" alt="RTENOTITLE" src="/wiki/images/2/2a/RSB-3420_uboot_default_2021-10-27_135059.jpg" style="vertical-align:middle;" title="RTENOTITLE" />'''
  
−
<h3><img _fck_mw_filename="RSB-3430 uboot default 2 2021-10-27 135218.jpg" _fck_mw_origimgheight="605" _fck_mw_origimgwidth="1328" alt="RTENOTITLE" src="/wiki/images/a/a5/RSB-3430_uboot_default_2_2021-10-27_135218.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></h3>
+
&nbsp;
  
−
<h3><b>乙太網路使用方法(Ethernent Testing Method)</b></h3>
+
=== <img _fck_mw_filename="RSB-3430 uboot default 2 2021-10-27 135218.jpg" _fck_mw_origimgheight="605" _fck_mw_origimgwidth="1328" alt="RTENOTITLE" src="/wiki/images/a/a5/RSB-3430_uboot_default_2_2021-10-27_135218.jpg" style="vertical-align:middle;" title="RTENOTITLE" /> ===
  
−
<p><b>Command&nbsp;: ifconfig&nbsp;</b></p>
+
=== '''乙太網路使用方法(Ethernent Testing Method)''' ===
  
−
<p><img _fck_mw_filename="RSB-3430 ifconfig info 2021-10-27 092342.jpg" _fck_mw_origimgheight="320" _fck_mw_origimgwidth="517" alt="RTENOTITLE" src="/wiki/images/5/52/RSB-3430_ifconfig_info_2021-10-27_092342.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
'''Command&nbsp;: ifconfig&nbsp;'''
  
−
<p><b>Command: Ping 8.8.8.8&nbsp;</b></p>
+
<img _fck_mw_filename="RSB-3430 ifconfig info 2021-10-27 092342.jpg" _fck_mw_origimgheight="320" _fck_mw_origimgwidth="517" alt="RTENOTITLE" src="/wiki/images/5/52/RSB-3430_ifconfig_info_2021-10-27_092342.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
  
−
<p><b><img _fck_mw_filename="RSB-3430 ping 8888 2021-10-27 092542.jpg" _fck_mw_origimgheight="287" _fck_mw_origimgwidth="671" alt="RTENOTITLE" src="/wiki/images/d/d8/RSB-3430_ping_8888_2021-10-27_092542.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></b></p>
+
'''Command: Ping 8.8.8.8&nbsp;'''
  
−
<p>&nbsp;</p>
+
'''<img _fck_mw_filename="RSB-3430 ping 8888 2021-10-27 092542.jpg" _fck_mw_origimgheight="287" _fck_mw_origimgwidth="671" alt="RTENOTITLE" src="/wiki/images/d/d8/RSB-3430_ping_8888_2021-10-27_092542.jpg" style="vertical-align:middle;" title="RTENOTITLE" />'''
  
−
<h3><b>WiFi &amp; BT 使用方法(WIFI &amp; Bluetooth&nbsp;Testing Method)</b></h3>
+
&nbsp;
  
−
<pre>
+
=== '''WiFi & BT 使用方法(WIFI & Bluetooth&nbsp;Testing Method)''' ===
−
M.2 module (EWM-W162M201E) - WIFI / BT Function&amp;nbsp;
+
<pre>M.2 module (EWM-W162M201E) - WIFI / BT Function&amp;nbsp;
 
WIFI&amp;nbsp;
 
WIFI&amp;nbsp;
  
Line 376: Line 348:
 
</pre>
 
</pre>
  
−
<p>&nbsp;</p>
+
&nbsp;
−
 
 
−
<h3><b>3G使用方法(3G Testing Method)</b></h3>
 
  
−
<pre>
+
=== '''3G使用方法(3G Testing Method)''' ===
−
Command:
+
<pre>Command:
 
3G (Telit HE910D)&amp;nbsp;
 
3G (Telit HE910D)&amp;nbsp;
 
pppd connect &#39;chat -v -s -t 10 &quot;&quot; &quot;AT&quot; &quot;&quot; &quot;ATDT*99#&quot; &quot;CONNECT&quot; &quot;&quot;&#39; user username password password /dev/ttyACM3 460800 nodetach crtscts debug usepeerdns defaultroute &amp;&amp;nbsp;
 
pppd connect &#39;chat -v -s -t 10 &quot;&quot; &quot;AT&quot; &quot;&quot; &quot;ATDT*99#&quot; &quot;CONNECT&quot; &quot;&quot;&#39; user username password password /dev/ttyACM3 460800 nodetach crtscts debug usepeerdns defaultroute &amp;&amp;nbsp;
 
</pre>
 
</pre>
  
−
<h3><b>USB 測試方式(USB Test metod )</b></h3>
+
=== '''USB 測試方式(USB Test metod )''' ===
  
−
<p>USB&nbsp;</p>
+
USB&nbsp;
  
−
<p>Insert a USB disk</p>
+
Insert a USB disk
  
−
<p>usb 1-1.2: new high-speed USB device number 4 using ci_hdrc<br />
+
usb 1-1.2: new high-speed USB device number 4 using ci_hdrc<br/> usb-storage 1-1.2:1.0: USB Mass Storage device detected<br/> scsi2&nbsp;: usb-storage 1-1.2:1.0<br/> scsi 2:0:0:0: Direct-Access &nbsp; &nbsp; Generic- SD/MMC &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 1.00 PQ: 0 ANSI: 0 CCS<br/> sd 2:0:0:0: [sda] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB)<br/> sd 2:0:0:0: [sda] Write Protect is off<br/> sd 2:0:0:0: [sda] No Caching mode page found<br/> sd 2:0:0:0: [sda] Assuming drive cache: write through<br/> sd 2:0:0:0: [sda] No Caching mode page found<br/> sd 2:0:0:0: [sda] Assuming drive cache: write through<br/> sda: sda1<br/> sd 2:0:0:0: [sda] No Caching mode page found<br/> sd 2:0:0:0: [sda] Assuming drive cache: write through<br/> sd 2:0:0:0: [sda] Attached SCSI removable disk
−
usb-storage 1-1.2:1.0: USB Mass Storage device detected<br />
 
−
scsi2&nbsp;: usb-storage 1-1.2:1.0<br />
 
−
scsi 2:0:0:0: Direct-Access &nbsp; &nbsp; Generic- SD/MMC &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 1.00 PQ: 0 ANSI: 0 CCS<br />
 
−
sd 2:0:0:0: [sda] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB)<br />
 
−
sd 2:0:0:0: [sda] Write Protect is off<br />
 
−
sd 2:0:0:0: [sda] No Caching mode page found<br />
 
−
sd 2:0:0:0: [sda] Assuming drive cache: write through<br />
 
−
sd 2:0:0:0: [sda] No Caching mode page found<br />
 
−
sd 2:0:0:0: [sda] Assuming drive cache: write through<br />
 
−
sda: sda1<br />
 
−
sd 2:0:0:0: [sda] No Caching mode page found<br />
 
−
sd 2:0:0:0: [sda] Assuming drive cache: write through<br />
 
−
sd 2:0:0:0: [sda] Attached SCSI removable disk</p>
 
  
−
<h3><b>串口使用方法(Serial Port Operating&nbsp;Method)</b></h3>
+
=== '''串口使用方法(Serial Port Operating&nbsp;Method)''' ===
  
−
<p><b>RS-232 Test&nbsp;</b></p>
+
'''RS-232 Test&nbsp;'''
−
 
+
<pre>Command&amp;nbsp;: stty -F /dev/ttymxc1 115200
−
<pre>
 
−
Command&amp;nbsp;: stty -F /dev/ttymxc1 115200
 
 
           echo Serial Port Test &gt; /dev/ttymxc1</pre>
 
           echo Serial Port Test &gt; /dev/ttymxc1</pre>
  
−
<p><br />
+
<br/> '''RS-422 setting'''
−
<b>RS-422 setting</b></p>
+
<pre>echo 134 &gt; /sys/class/gpio/export
−
 
 
−
<pre>
 
−
echo 134 &gt; /sys/class/gpio/export
 
 
echo 135 &gt; /sys/class/gpio/export
 
echo 135 &gt; /sys/class/gpio/export
 
echo out &gt; /sys/class/gpio/gpio1/direction
 
echo out &gt; /sys/class/gpio/gpio1/direction
Line 426: Line 378:
 
echo 1 &gt; /sys/class/gpio/gpio2/value </pre>
 
echo 1 &gt; /sys/class/gpio/gpio2/value </pre>
  
−
<p><b>RS-422 test&nbsp;</b></p>
+
'''RS-422 test&nbsp;'''
−
 
+
<pre>Command&amp;nbsp;: stty -F /dev/ttymxc1 115200
−
<pre>
 
−
Command&amp;nbsp;: stty -F /dev/ttymxc1 115200
 
 
           echo Serial Port Test &gt; /dev/ttymxc1</pre>
 
           echo Serial Port Test &gt; /dev/ttymxc1</pre>
  
−
<p><b>RS-485 setting&nbsp;</b></p>
+
'''RS-485 setting&nbsp;'''
−
 
+
<pre>echo 134 &gt; /sys/class/gpio/export
−
<pre>
 
−
echo 134 &gt; /sys/class/gpio/export
 
 
echo 135 &gt; /sys/class/gpio/export
 
echo 135 &gt; /sys/class/gpio/export
 
echo out &gt; /sys/class/gpio/gpio1/direction
 
echo out &gt; /sys/class/gpio/gpio1/direction
Line 442: Line 390:
 
echo 1 &gt; /sys/class/gpio/gpio2/value </pre>
 
echo 1 &gt; /sys/class/gpio/gpio2/value </pre>
  
−
<p><br />
+
<br/> '''RS-485 test&nbsp;'''
−
<b>RS-485 test&nbsp;</b></p>
+
<pre>Command&amp;nbsp;: stty -F /dev/ttymxc1 115200
−
 
 
−
<pre>
 
−
Command&amp;nbsp;: stty -F /dev/ttymxc1 115200
 
 
           echo Serial Port Test &gt; /dev/ttymxc1</pre>
 
           echo Serial Port Test &gt; /dev/ttymxc1</pre>
  
−
<h3>&nbsp;</h3>
+
=== &nbsp; ===
−
 
 
−
<h3><b>遠程訪問及文件傳輸(Remote Access and File Transimmion)</b></h3>
 
  
−
<p><b>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 查看主板IP位址&nbsp;(&nbsp;Chech IP Address )：</b>​</p>
+
=== '''遠程訪問及文件傳輸(Remote Access and File Transimmion)''' ===
  
−
<pre>
+
'''&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 查看主板IP位址&nbsp;(&nbsp;Chech IP Address )：'''​
−
        Command&amp;nbsp;: ifconfig</pre>
+
<pre>       Command&amp;nbsp;: ifconfig</pre>
  
−
<p><img _fck_mw_filename="Eth0ssh 2021-09-10 143210.jpg" _fck_mw_origimgheight="395" _fck_mw_origimgwidth="1002" alt="RTENOTITLE" src="/wiki/images/5/52/Eth0ssh_2021-09-10_143210.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
<img _fck_mw_filename="Eth0ssh 2021-09-10 143210.jpg" _fck_mw_origimgheight="395" _fck_mw_origimgwidth="1002" alt="RTENOTITLE" src="/wiki/images/5/52/Eth0ssh_2021-09-10_143210.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
  
−
<h4>Windows下SSH访问及文件传输</h4>
+
==== Windows下SSH访问及文件传输 ====
  
−
<p>SSH Remote Log into Device&nbsp;</p>
+
SSH Remote Log into Device&nbsp;
  
−
<ul>
+
*SSH远程登录,以putty选择putty.exe(或者使用Xshell、SecureCRT等类似软件)  
−
<li>SSH远程登录,以putty选择putty.exe(或者使用Xshell、SecureCRT等类似软件)</li>
+
*需要设置远程设备的IP、通讯端口(默认22)、通讯方式，登录后验证用户名密码  
−
<li>需要设置远程设备的IP、通讯端口(默认22)、通讯方式，登录后验证用户名密码</li>
 
−
</ul>
 
  
−
<p>&nbsp;</p>
+
&nbsp;
  
−
<p><img _fck_mw_filename="SSHsettingdetail.png" _fck_mw_origimgheight="600" _fck_mw_origimgwidth="748" alt="RTENOTITLE" src="/wiki/images/3/35/SSHsettingdetail.png" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
<img _fck_mw_filename="SSHsettingdetail.png" _fck_mw_origimgheight="600" _fck_mw_origimgwidth="748" alt="RTENOTITLE" src="/wiki/images/3/35/SSHsettingdetail.png" style="vertical-align:middle;" title="RTENOTITLE" />
  
−
<p><img _fck_mw_filename="SSHSetting2021-09-10 143631.jpg" _fck_mw_origimgheight="437" _fck_mw_origimgwidth="477" alt="RTENOTITLE" src="/wiki/images/b/b6/SSHSetting2021-09-10_143631.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
<img _fck_mw_filename="SSHSetting2021-09-10 143631.jpg" _fck_mw_origimgheight="437" _fck_mw_origimgwidth="477" alt="RTENOTITLE" src="/wiki/images/b/b6/SSHSetting2021-09-10_143631.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
  
−
<p>&nbsp;</p>
+
&nbsp;
  
−
<p><img _fck_mw_filename="Sshsetting12021-09-10 143743n.jpg" _fck_mw_origimgheight="363" _fck_mw_origimgwidth="576" alt="RTENOTITLE" src="/wiki/images/b/b0/Sshsetting12021-09-10_143743n.jpg" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
<img _fck_mw_filename="Sshsetting12021-09-10 143743n.jpg" _fck_mw_origimgheight="363" _fck_mw_origimgwidth="576" alt="RTENOTITLE" src="/wiki/images/b/b0/Sshsetting12021-09-10_143743n.jpg" style="vertical-align:middle;" title="RTENOTITLE" />
  
−
<p><img _fck_mw_filename="RSB-3430 ssh connection.png" _fck_mw_origimgheight="449" _fck_mw_origimgwidth="821" alt="RTENOTITLE" src="/wiki/images/c/cf/RSB-3430_ssh_connection.png" style="vertical-align:middle;" title="RTENOTITLE" /></p>
+
<img _fck_mw_filename="RSB-3430 ssh connection.png" _fck_mw_origimgheight="449" _fck_mw_origimgwidth="821" alt="RTENOTITLE" src="/wiki/images/c/cf/RSB-3430_ssh_connection.png" style="vertical-align:middle;" title="RTENOTITLE" />
  
−
<h2><b>通用方法(General Method)</b></h2>
+
== '''通用方法(General Method)''' ==
  
−
<h3><b>查看CPU温度(Check CPU Temperature)</b></h3>
+
=== '''查看CPU温度(Check CPU Temperature)''' ===
−
 
+
<pre>   root@imx8qxprom5620a1:/# cat /sys/devices/virtual/thermal/thermal_zone0/temp 44600
−
<pre>
 
−
    root@imx8qxprom5620a1:/# cat /sys/devices/virtual/thermal/thermal_zone0/temp 44600
 
  
 
     # 或者直接以度爲單位顯示 echo $[$(cat /sys/class/thermal/thermal_zone0/temp)/1000]&deg; &gt;&gt;&gt; 45&deg;</pre>
 
     # 或者直接以度爲單位顯示 echo $[$(cat /sys/class/thermal/thermal_zone0/temp)/1000]&deg; &gt;&gt;&gt; 45&deg;</pre>
  
−
<h3><b>查看CPU频率(Check CPU Frequency)</b></h3>
+
=== '''查看CPU频率(Check CPU Frequency)''' ===
−
 
+
<pre>           cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq  
−
<pre>
 
−
          cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq  
 
 
           &gt;&gt; 900000
 
           &gt;&gt; 900000
 
           cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq     
 
           cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq     
 
           &gt;&gt; 1200000</pre>
 
           &gt;&gt; 1200000</pre>
  
−
<h3><b>查看内存容量(Check Memory&nbsp;Capacity)</b></h3>
+
=== '''查看内存容量(Check Memory&nbsp;Capacity)''' ===
−
 
+
<pre>root@imx8qxprom5620a1:/# busybox free -m
−
<pre>
 
−
root@imx8qxprom5620a1:/# busybox free -m
 
 
             total      used      free    shared    buffers    cached
 
             total      used      free    shared    buffers    cached
 
Mem:      1794920    516080    1278840      17252      9852        80292
 
Mem:      1794920    516080    1278840      17252      9852        80292
Line 508: Line 443:
 
</pre>
 
</pre>
  
−
<h3><b>查看存储容量(Check Storage Capacity)</b></h3>
+
=== '''查看存储容量(Check Storage Capacity)''' ===
−
 
+
<pre>root@imx8qxprom5620a1:/# busybox df -h
−
<pre>
 
−
root@imx8qxprom5620a1:/# busybox df -h
 
 
Filesystem                Size      Used Available Use% Mounted on
 
Filesystem                Size      Used Available Use% Mounted on
 
/dev/root                13.4G      1.7G    11.1G  13% /
 
/dev/root                13.4G      1.7G    11.1G  13% /
Line 526: Line 459:
 
root@imx8qxprom5620a1:/#</pre>
 
root@imx8qxprom5620a1:/#</pre>
  
−
<h3><b>&nbsp;網路Ping測試(Ping Network Testing)</b></h3>
+
=== '''&nbsp;網路Ping測試(Ping Network Testing)''' ===
−
 
+
<pre>     ping 8.8.8.8
−
<pre>
 
−
    ping 8.8.8.8
 
 
     PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
 
     PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
 
     64 bytes from 8.8.8.8: icmp_seq=1 ttl=54 time=2.10 ms
 
     64 bytes from 8.8.8.8: icmp_seq=1 ttl=54 time=2.10 ms
 
     64 bytes from 8.8.8.8: icmp_seq=2 ttl=54 time=2.10 ms</pre>
 
     64 bytes from 8.8.8.8: icmp_seq=2 ttl=54 time=2.10 ms</pre>
  
−
<h3><b>設置RTC (RTC Setting)&nbsp;</b></h3>
+
=== '''設置RTC (RTC Setting)&nbsp;''' ===
−
 
+
<pre>RTC&amp;nbsp;:&amp;nbsp;
−
<pre>
 
−
RTC&amp;nbsp;:&amp;nbsp;
 
 
$ date MMDDhhmm[[CC]YY][.ss]
 
$ date MMDDhhmm[[CC]YY][.ss]
 
$ hwclock -w
 
$ hwclock -w
 
$ ntpdate tw.pool.ntp.org</pre>
 
$ ntpdate tw.pool.ntp.org</pre>
  
−
<h3><b>Audio 測試</b></h3>
+
=== '''Audio 測試''' ===
−
 
+
<pre>Line out&amp;nbsp;:  
−
<pre>
 
−
Line out&amp;nbsp;:  
 
 
$ aplay -D plughw:0,0 Advantech.wav
 
$ aplay -D plughw:0,0 Advantech.wav
 
MIC in&amp;nbsp;:  
 
MIC in&amp;nbsp;:  
Line 551: Line 478:
 
</pre>
 
</pre>
  
−
<h3><b>&nbsp;Display (LVDS:800x480)設置&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</b></h3>
+
=== '''&nbsp;Display (LVDS:800x480)設置&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;''' ===
−
 
+
<pre>U-boot command&amp;nbsp;:  
−
<pre>
 
−
U-boot command&amp;nbsp;:  
 
 
setenv mmcargs setenv bootargs console=${console},${baudrate} ${smp} root=${mmcroot} ${bootargs} video=mxcfb0:dev=ldb,800x480M@60,if=RGB24
 
setenv mmcargs setenv bootargs console=${console},${baudrate} ${smp} root=${mmcroot} ${bootargs} video=mxcfb0:dev=ldb,800x480M@60,if=RGB24
 
</pre>
 
</pre>
  
−
<h2><b>Linux&nbsp;BSP編譯方法(Linux&nbsp;BSP Compile Method)</b></h2>
+
== '''Linux&nbsp;BSP編譯方法(Linux&nbsp;BSP Compile Method)''' ==
  
−
<h3><a alt="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX8/Yocto_LBVA_User_Guide" href="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX8/Yocto_LBVA_User_Guide" title="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX8/Yocto_LBVA_User_Guide"><b>Yocto 3.0</b></a></h3>
+
=== <a alt="[http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX8/Yocto_LBVA_User_Guide http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX8/Yocto_LBVA_User_Guide]" href="[http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX8/Yocto_LBVA_User_Guide http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX8/Yocto_LBVA_User_Guide]" title="[http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX8/Yocto_LBVA_User_Guide http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX8/Yocto_LBVA_User_Guide]">'''Yocto 3.0'''</a> ===

Revision as of 10:04, 17 May 2022

Contents

資源特性(Features)

  • NXP ARM® Cortex®-A9 i.MX6 Dual 1GHz
  • On-board 1GB DDR3L and 4GB eMMC
  • HDMI
  • RS-232/422/485, 2 USB, 1 GbE
  • Mini-PCIe w/ Nano SIM socket for 3G/LTE
  • M.2 Key E, Type 2230 for Wi-Fi & BT
  • Micro SD socket
  • UIO40-Express expansion as 1 RS-485, 8 GPIO, 2 RS-232, 2nd LAN, CAN Bus

訂購資訊(Ordering Information)

<img _fck_mw_filename="RSB-3430 orderinfo.PNG" _fck_mw_origimgheight="157" _fck_mw_origimgwidth="1308" alt="RTENOTITLE" src="/wiki/images/8/83/RSB-3430_orderinfo.PNG" style="vertical-align:middle;" title="RTENOTITLE" />

规格（Specifications）

接口布局和尺寸(Layout and Sizes)

接口布局圖 Board Dimension Layout 

<img _fck_mw_filename="RSB-3720 board review2021-10-21 144120.jpg" _fck_mw_origimgheight="347" _fck_mw_origimgwidth="462" alt="RTENOTITLE" src="/wiki/images/5/52/RSB-3720_board_review2021-10-21_144120.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

<img _fck_mw_filename="RSB-3720 connector location 2021-10-21 143853.jpg" _fck_mw_origimgheight="478" _fck_mw_origimgwidth="651" alt="RTENOTITLE" src="/wiki/images/4/41/RSB-3720_connector_location_2021-10-21_143853.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

 

<img _fck_mw_filename="RSB-3720 connector location back 2021-10-21 144716.jpg" _fck_mw_origimgheight="381" _fck_mw_origimgwidth="492" alt="RTENOTITLE" src="/wiki/images/f/ff/RSB-3720_connector_location_back_2021-10-21_144716.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

 

 'Connector List'

<tbody>
BAT RTC Battery Connector
BL1 LVDS Backlight 1 
BL2 LVDS Backlight 2 
COM1  COM + CAN Pin Header (default as debug console) 
CSI1 MIPI-CSI Camera Input 1
CSI2 MIPI-CSI Camera Input 2 
DCIN/DCIN 1 12V DC Power Inout by DC Jack / by Pin Header 
HDMI  HDMI CONN
LAN1 Ethernet 1 
LAN2  Ethernet 2
LOUT Line Out Pin Header
LVDS LVDS CONN.
M2 M.2 Key E CONN.
MIC MIC In Pin Header
MPCIE Mini-PCIe CONN.
RST Rest Button
SD SD Slot
UIO1  UIO40-Express Pin Header 1 
UIO2  UIO40-Express Pin Header 2 
USB1 USB CONN. (USB 3.2 Gen 1 on TOP + USB 2.0 on BOT)
</tbody>

接口引脚定義 (Pin definitions)

  • <a href="BLP1">BLP1 </a>
  • <a href="BLP2">BLP2</a>
  • <a href="VDD1">VDD1</a>
  • <a href="SW1">SW1</a>
  • <a href="BAT%20%28RTC%20Battery%20CONN.%29">BAT (RTC Battery CONN.)</a>
  • <a href="BL1%20%28LVDS%20Backlight%201%29">BL1 (LVDS Backlight 1)</a>
  • <a href="BL2%20%28LVDS%20Backlight%202%29">BL2 (LVDS Backlight 2)</a>
  • <a href="COM1%20%28COM%20%2B%20CAN%20Pin%20Header%29%3A%20%28default%20as%20debug%20console%29">COM1 (COM + CAN Pin Header): (default as debug console)</a>
  • <a href="CSI1%20%28MIPI-CSI%20Camera%20Input%201%29">CSI1 (MIPI-CSI Camera Input 1)</a>
  • <a href="CSI2%20%28MIPI-CSI%20Camera%20Input%202%29">CSI2 (MIPI-CSI Camera Input 2)</a>
  • <a href="DCIN%2F%20DCIN1%20%2812V%20DC%20Power%20Input%20by%20DC%20Jack%2F%20by%20Pin%20Header%29">DCIN/ DCIN1 (12V DC Power Input by DC Jack/ by Pin Header)</a>
  • <a href="HDMI%20%28HDMI%20CONN.%29">HDMI (HDMI CONN.)</a>
  • <a href="LAN1%20%28Ethernet%20eth0%29">LAN1 (Ethernet eth0)</a>
  • <a href="LAN2%20%28Ethernet%20eth1%29">LAN2 (Ethernet eth1)</a>
  • <a href="LOUT%20%28Line%20Out%20Pin%20Header%29">LOUT (Line Out Pin Header)</a>
  • <a href="LVDS%20%28LVDS%20CONN.%29">LVDS (LVDS CONN.)</a>
  • <a href="M2%20%28M.2%20Key%20E%20CONN.%29">M2 (M.2 Key E CONN.)</a>
  • <a href="MIC%20%28MIC%20In%20Pin%20Header%29">MIC (MIC In Pin Header)</a>
  • <a href="MPCIE%20%28Mini-PCIe%20CONN.%29">MPCIE (Mini-PCIe CONN.)</a>
  • <a href="RST%20%28Reset%20Button%29">RST (Reset Button)</a>
  • <a href="SD%20%28SD%20Slot%29">SD (SD Slot)</a>
  • <a href="SIM%20%28SIM%20Slot%29">SIM (SIM Slot)</a>
  • <a href="UIO1%20%28UIO40-Express%20Pin%20Header%201%29">UIO1 (UIO40-Express Pin Header 1)</a>
  • <a href="UIO2%20%28UIO40-Express%20Pin%20Header%202%29">UIO2 (UIO40-Express Pin Header 2)</a>
  • <a href="USB%201%20%28USB%203.2%20Gen%201%20on%20TOP%20%2B%20USB%202.0%20on%20BOT%29">USB 1 (USB 3.2 Gen 1 on TOP + USB 2.0 on BOT)</a>
  • <a href="LED">LED</a>

 机械尺寸  (Mechanical Characteristics)

<img _fck_mw_filename="RSB-3720 board Dimensions 2021-10-21 145827.jpg" _fck_mw_origimgheight="497" _fck_mw_origimgwidth="577" alt="RTENOTITLE" src="/wiki/images/a/af/RSB-3720_board_Dimensions_2021-10-21_145827.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

快速入门 (Quick Start)

系统下载 (OS Download)

'Linux系统 (Linux OS)'   

<tbody>

Git BSP Tag Version

Product

 BSP/Image

Date

Alpha Release

Beta Release

MP Release

Release Note

Comment

Release Owner

imx6LBV90146 RSB-3430A1  3430A1AIM20LIV90146_DualQuad_2021-08-08.img.gz 2021-08-08 V          
</tbody>

 

   

 Linux 燒錄方法 (Linux Flash eMMC Method)

1. 確認SD 在Ubuntu 電腦中的代號

<img _fck_mw_filename="RSB-3430 Check SDCard 2021-10-26 134232.jpg" _fck_mw_origimgheight="22" _fck_mw_origimgwidth="677" alt="RTENOTITLE" src="/wiki/images/2/21/RSB-3430_Check_SDCard_2021-10-26_134232.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

<img _fck_mw_filename="RSB-3430 SDCardInfo 2021-10-26 134323.jpg" _fck_mw_origimgheight="191" _fck_mw_origimgwidth="583" alt="RTENOTITLE" src="/wiki/images/5/55/RSB-3430_SDCardInfo_2021-10-26_134323.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

2. 先將鏡像燒錄到SD Card 中( Create a bootable SD card ) 

'<img _fck_mw_filename="RSB-3430 dd SDcard 2021-10-26 134535.jpg" _fck_mw_origimgheight="46" _fck_mw_origimgwidth="1267" alt="RTENOTITLE" src="/wiki/images/1/15/RSB-3430_dd_SDcard_2021-10-26_134535.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

 

 

<img _fck_mw_filename="RSB-3430 SDCard info 2 2021-10-26 134939.jpg" _fck_mw_origimgheight="87" _fck_mw_origimgwidth="1243" alt="RTENOTITLE" src="/wiki/images/5/54/RSB-3430_SDCard_info_2_2021-10-26_134939.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

3.設定終端機(Set Debug Terminal) 

Debug 串口調試 (Debug port Setting)

以 Tera Term  为例介绍如何使用串口调试功能 

   Baud Rate波特率：115200
   Data 数据位：8
   Parity 奇偶校验：无
&nbsp;  Stop 停止位：1
   Flow Control流控：无
 

Tera Term Tool 

<img _fck_mw_filename="TeraTerm 2021-09-10 140930n.jpg" _fck_mw_origimgheight="428" _fck_mw_origimgwidth="700" alt="RTENOTITLE" src="/wiki/images/2/25/TeraTerm_2021-09-10_140930n.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

<img _fck_mw_filename="TeraTerm12021-09-10 141114n.jpg" _fck_mw_origimgheight="391" _fck_mw_origimgwidth="609" alt="RTENOTITLE" src="/wiki/images/6/6d/TeraTerm12021-09-10_141114n.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

Check the Sriel port in Device Manager (查看PC端的串口号)：

if you can not identify the Serial device , please check your serial driver. 

<img _fck_mw_filename="COMportinx862021-09-10 141610.jpg" _fck_mw_origimgheight="640" _fck_mw_origimgwidth="588" alt="RTENOTITLE" src="/wiki/images/9/99/COMportinx862021-09-10_141610.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

4. 將SD card 插入機器 

  <img _fck_mw_filename="RSB-3430 plugSD Card3 24240133.jpg" _fck_mw_origimgheight="739" _fck_mw_origimgwidth="554" alt="RTENOTITLE" src="/wiki/images/9/9a/RSB-3430_plugSD_Card3_24240133.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

5. 檢查撥碼開關  ( 1 ON , 2 OFF) 

<img _fck_mw_filename="RSB-3430 Switch 24240134.jpg" _fck_mw_origimgheight="554" _fck_mw_origimgwidth="739" alt="RTENOTITLE" src="/wiki/images/3/32/RSB-3430_Switch_24240134.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

6. 接上Debug Cable 

<img _fck_mw_filename="RSB-3430 Debug port 24240136.jpg" _fck_mw_origimgheight="554" _fck_mw_origimgwidth="739" alt="RTENOTITLE" src="/wiki/images/4/46/RSB-3430_Debug_port_24240136.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

7. 打開電源 

<img _fck_mw_filename="RSB-3430 turnonpower 24240137.jpg" _fck_mw_origimgheight="554" _fck_mw_origimgwidth="739" alt="RTENOTITLE" src="/wiki/images/1/19/RSB-3430_turnonpower_24240137.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

8. 由終端機進入系統 

<img _fck_mw_filename="RSB-3430 Debug terminal 2021-10-26 141124.jpg" _fck_mw_origimgheight="461" _fck_mw_origimgwidth="800" alt="RTENOTITLE" src="/wiki/images/6/60/RSB-3430_Debug_terminal_2021-10-26_141124.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

9. 燒錄鏡像到 eMMC flash 

將3430A1AIM20LIV90146_DualQuad_flash_tool.tgz 複製到U盤中,插入機器的USB Port 

<img _fck_mw_filename="RSB-3430 Cpfile toUsb 2021-10-26 141813.jpg" _fck_mw_origimgheight="158" _fck_mw_origimgwidth="503" alt="RTENOTITLE" src="/wiki/images/d/d0/RSB-3430_Cpfile_toUsb_2021-10-26_141813.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

在系統中 ,確認USB中燒錄資料 

<img _fck_mw_filename="RSB-3430 USB IN Device 2021-10-26 142038.jpg" _fck_mw_origimgheight="96" _fck_mw_origimgwidth="727" alt="RTENOTITLE" src="/wiki/images/0/0c/RSB-3430_USB_IN_Device_2021-10-26_142038.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

<img _fck_mw_filename="RSB-3430 CP file into root 2021-10-26 143316.jpg" _fck_mw_origimgheight="46" _fck_mw_origimgwidth="806" alt="RTENOTITLE" src="/wiki/images/d/d9/RSB-3430_CP_file_into_root_2021-10-26_143316.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

在根目錄下 ,解壓縮 

<img _fck_mw_filename="RSB-3430 Unzip file in root 2021-10-26 143506.jpg" _fck_mw_origimgheight="231" _fck_mw_origimgwidth="810" alt="RTENOTITLE" src="/wiki/images/c/c5/RSB-3430_Unzip_file_in_root_2021-10-26_143506.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

在mk_Inand 資料夾中執行 ./mksd-linux.sh 

<img _fck_mw_filename="RSB-3430 check file 2021-10-26 143952.jpg" _fck_mw_origimgheight="140" _fck_mw_origimgwidth="807" alt="RTENOTITLE" src="/wiki/images/8/87/RSB-3430_check_file_2021-10-26_143952.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

<img _fck_mw_filename="RSB-3430 mksd linuxsh 2021-10-26 143855.jpg" _fck_mw_origimgheight="241" _fck_mw_origimgwidth="815" alt="RTENOTITLE" src="/wiki/images/d/d0/RSB-3430_mksd_linuxsh_2021-10-26_143855.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

<img _fck_mw_filename="RSB-3430 flash image done 2021-10-26 144801.jpg" _fck_mw_origimgheight="290" _fck_mw_origimgwidth="801" alt="RTENOTITLE" src="/wiki/images/2/29/RSB-3430_flash_image_done_2021-10-26_144801.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

10. 移除SD 卡,從eMMC 開機. 

<img _fck_mw_filename="RSB-3430 boot from eMMC 2021-10-27 091349.jpg" _fck_mw_origimgheight="477" _fck_mw_origimgwidth="1018" alt="RTENOTITLE" src="/wiki/images/d/d9/RSB-3430_boot_from_eMMC_2021-10-27_091349.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

 

Linux系统的基本使用(Linux System Basic Operating Method)

載入預設值由uboot 設定(Load Default Setting in Uboot )

1. 開機時 在五秒內按下空白鍵 ,進入Uboot 

2. Command : 

    env default -a 

    saveenv 

    reset   

<img _fck_mw_filename="RSB-3430 Load default 2021-10-27 091752.jpg" _fck_mw_origimgheight="487" _fck_mw_origimgwidth="1025" alt="RTENOTITLE" src="/wiki/images/2/22/RSB-3430_Load_default_2021-10-27_091752.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

顯示設定 (Display  Setting ) 

 預設值為: HDMI 輸出

<img _fck_mw_filename="RSB-3420 uboot default 2021-10-27 135059.jpg" _fck_mw_origimgheight="625" _fck_mw_origimgwidth="1332" alt="RTENOTITLE" src="/wiki/images/2/2a/RSB-3420_uboot_default_2021-10-27_135059.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

 

<img _fck_mw_filename="RSB-3430 uboot default 2 2021-10-27 135218.jpg" _fck_mw_origimgheight="605" _fck_mw_origimgwidth="1328" alt="RTENOTITLE" src="/wiki/images/a/a5/RSB-3430_uboot_default_2_2021-10-27_135218.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

乙太網路使用方法(Ethernent Testing Method)

Command : ifconfig 

<img _fck_mw_filename="RSB-3430 ifconfig info 2021-10-27 092342.jpg" _fck_mw_origimgheight="320" _fck_mw_origimgwidth="517" alt="RTENOTITLE" src="/wiki/images/5/52/RSB-3430_ifconfig_info_2021-10-27_092342.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

Command: Ping 8.8.8.8 

<img _fck_mw_filename="RSB-3430 ping 8888 2021-10-27 092542.jpg" _fck_mw_origimgheight="287" _fck_mw_origimgwidth="671" alt="RTENOTITLE" src="/wiki/images/d/d8/RSB-3430_ping_8888_2021-10-27_092542.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

 

WiFi & BT 使用方法(WIFI & Bluetooth Testing Method)

M.2 module (EWM-W162M201E) - WIFI / BT Function&nbsp;
WIFI&nbsp;

$ ifconfig mlan0 up
$ wpa_passphrase ${SSID} ${WPA_KEY} > /tmp/wpa.conf
$ wpa_supplicant -BDwext -imlan0 -c/tmp/wpa.conf
$ udhcpc -b -i mlan0

BlueTooth&nbsp;

$ /usr/libexec/bluetooth/bluetoothd -C &
$ hciconfig hci0 up
$ bluetoothctl
$ discoverable on
$ pairable on
$ scan on
[NEW] FC:18:3C:8D:75:F4 Device ID&nbsp;
$ scan off
$ pair FC:18:3C:8D:75:F4
$ connect FC:18:3C:8D:75:F4

 

3G使用方法(3G Testing Method)

Command:
3G (Telit HE910D)&nbsp;
pppd connect 'chat -v -s -t 10 "" "AT" "" "ATDT*99#" "CONNECT" ""' user username password password /dev/ttyACM3 460800 nodetach crtscts debug usepeerdns defaultroute &&nbsp;

USB 測試方式(USB Test metod )

USB 

Insert a USB disk

usb 1-1.2: new high-speed USB device number 4 using ci_hdrc
usb-storage 1-1.2:1.0: USB Mass Storage device detected
scsi2 : usb-storage 1-1.2:1.0
scsi 2:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: [sda] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] Attached SCSI removable disk

串口使用方法(Serial Port Operating Method)

RS-232 Test  

Command&nbsp;: stty -F /dev/ttymxc1 115200
          echo Serial Port Test > /dev/ttymxc1


RS-422 setting 

echo 134 > /sys/class/gpio/export
echo 135 > /sys/class/gpio/export
echo out > /sys/class/gpio/gpio1/direction
echo out > /sys/class/gpio/gpio2/direction
echo 1 > /sys/class/gpio/gpio1/value
echo 1 > /sys/class/gpio/gpio2/value

RS-422 test  

Command&nbsp;: stty -F /dev/ttymxc1 115200
          echo Serial Port Test > /dev/ttymxc1

RS-485 setting  

echo 134 > /sys/class/gpio/export
echo 135 > /sys/class/gpio/export
echo out > /sys/class/gpio/gpio1/direction
echo out > /sys/class/gpio/gpio2/direction
echo 0 > /sys/class/gpio/gpio1/value
echo 1 > /sys/class/gpio/gpio2/value


RS-485 test  

Command&nbsp;: stty -F /dev/ttymxc1 115200
          echo Serial Port Test > /dev/ttymxc1

 

遠程訪問及文件傳輸(Remote Access and File Transimmion)

              查看主板IP位址 ( Chech IP Address )：​ 

        Command&nbsp;: ifconfig

<img _fck_mw_filename="Eth0ssh 2021-09-10 143210.jpg" _fck_mw_origimgheight="395" _fck_mw_origimgwidth="1002" alt="RTENOTITLE" src="/wiki/images/5/52/Eth0ssh_2021-09-10_143210.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

Windows下SSH访问及文件传输

SSH Remote Log into Device 

  • SSH远程登录,以putty选择putty.exe(或者使用Xshell、SecureCRT等类似软件)
  • 需要设置远程设备的IP、通讯端口(默认22)、通讯方式，登录后验证用户名密码

 

<img _fck_mw_filename="SSHsettingdetail.png" _fck_mw_origimgheight="600" _fck_mw_origimgwidth="748" alt="RTENOTITLE" src="/wiki/images/3/35/SSHsettingdetail.png" style="vertical-align:middle;" title="RTENOTITLE" />

<img _fck_mw_filename="SSHSetting2021-09-10 143631.jpg" _fck_mw_origimgheight="437" _fck_mw_origimgwidth="477" alt="RTENOTITLE" src="/wiki/images/b/b6/SSHSetting2021-09-10_143631.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

 

<img _fck_mw_filename="Sshsetting12021-09-10 143743n.jpg" _fck_mw_origimgheight="363" _fck_mw_origimgwidth="576" alt="RTENOTITLE" src="/wiki/images/b/b0/Sshsetting12021-09-10_143743n.jpg" style="vertical-align:middle;" title="RTENOTITLE" />

<img _fck_mw_filename="RSB-3430 ssh connection.png" _fck_mw_origimgheight="449" _fck_mw_origimgwidth="821" alt="RTENOTITLE" src="/wiki/images/c/cf/RSB-3430_ssh_connection.png" style="vertical-align:middle;" title="RTENOTITLE" />

通用方法(General Method)

查看CPU温度(Check CPU Temperature)

    root@imx8qxprom5620a1:/# cat /sys/devices/virtual/thermal/thermal_zone0/temp 44600

    # 或者直接以度爲單位顯示 echo $[$(cat /sys/class/thermal/thermal_zone0/temp)/1000]° >>> 45°

查看CPU频率(Check CPU Frequency)

           cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq 
           >> 900000
           cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq    
           >> 1200000

查看内存容量(Check Memory Capacity)

root@imx8qxprom5620a1:/# busybox free -m
             total       used       free     shared    buffers     cached
Mem:       1794920     516080    1278840      17252      9852        80292
-/+ buffers/cache:     425936    1368984
Swap:            0          0          0

查看存储容量(Check Storage Capacity)

root@imx8qxprom5620a1:/# busybox df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/root                13.4G      1.7G     11.1G  13% /
devtmpfs                395.8M      4.0K    395.8M   0% /dev
tmpfs                   876.4M         0    876.4M   0% /dev/shm
tmpfs                   876.4M     16.5M    859.9M   2% /run
tmpfs                   876.4M         0    876.4M   0% /sys/fs/cgroup
tmpfs                   876.4M      4.0K    876.4M   0% /tmp
tmpfs                   876.4M    280.0K    876.2M   0% /var/volatile
/dev/mmcblk0p2           13.6G      1.7G     11.3G  13% /run/media/mmcblk0p2
/dev/mmcblk0p1           63.9M     23.4M     40.5M  37% /run/media/mmcblk0p1
/dev/mmcblk1p1           63.9M     23.4M     40.5M  37% /run/media/mmcblk1p1
tmpfs                   175.3M     88.0K    175.2M   0% /run/user/0
root@imx8qxprom5620a1:/#

 網路Ping測試(Ping Network Testing)

     ping 8.8.8.8
     PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
     64 bytes from 8.8.8.8: icmp_seq=1 ttl=54 time=2.10 ms
     64 bytes from 8.8.8.8: icmp_seq=2 ttl=54 time=2.10 ms

設置RTC (RTC Setting) 

RTC&nbsp;:&nbsp;
$ date MMDDhhmm[[CC]YY][.ss]
$ hwclock -w
$ ntpdate tw.pool.ntp.org

Audio 測試

Line out&nbsp;: 
$ aplay -D plughw:0,0 Advantech.wav
MIC in&nbsp;: 
$ arecord -t wav -c 1 -r 44100 -d 10 test.wav

 Display (LVDS:800x480)設置         

U-boot command&nbsp;: 
setenv mmcargs setenv bootargs console=${console},${baudrate} ${smp} root=${mmcroot} ${bootargs} video=mxcfb0:dev=ldb,800x480M@60,if=RGB24

Linux BSP編譯方法(Linux BSP Compile Method)

<a alt="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX8/Yocto_LBVA_User_Guide" href="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX8/Yocto_LBVA_User_Guide" title="http://ess-wiki.advantech.com.tw/view/IoTGateway/BSP/Linux/iMX8/Yocto_LBVA_User_Guide">Yocto 3.0</a>

Retrieved from "https://ess-wiki.advantech.com.tw/wiki/index.php?title=EPC-R3430_user_guide&oldid=23897"