Difference between revisions of "UIO-4032"
From ESS-WIKI
| Line 1: | Line 1: | ||
| − | == '''Specifications''' == | + | == '''Specifications (產品規格)''' == |
[[File:UIO-4032 info 2021-10-27 143428.jpg|RTENOTITLE]] | [[File:UIO-4032 info 2021-10-27 143428.jpg|RTENOTITLE]] | ||
| Line 5: | Line 5: | ||
[[File:UIO-4032 spec 2021-10-27 143451.jpg|RTENOTITLE]] | [[File:UIO-4032 spec 2021-10-27 143451.jpg|RTENOTITLE]] | ||
| − | == '''RSB-3430 測試方法''' == | + | == '''RSB-3430 Testing method (RSB-3430 測試方法)''' == |
'''RS-232 x2 : <br/> Note:ttymxc2 –COM_3 ttymxc3-COM_4''' | '''RS-232 x2 : <br/> Note:ttymxc2 –COM_3 ttymxc3-COM_4''' | ||
| Line 33: | Line 33: | ||
<pre>ifconfig eth1 8.8.8.8 </pre> | <pre>ifconfig eth1 8.8.8.8 </pre> | ||
| − | == '''RSB-3720 測試方法''' == | + | == '''RSB-3720 Testing method (RSB-3720 測試方法)''' == |
COM Port <br/> Rear IO – RS-232 x 2<br/> USB x 2<br/> Ethernet x 1<br/> Note:<br/> ttymxc1 – COM3<br/> ttymxc3 – COM4 | COM Port <br/> Rear IO – RS-232 x 2<br/> USB x 2<br/> Ethernet x 1<br/> Note:<br/> ttymxc1 – COM3<br/> ttymxc3 – COM4 | ||
Revision as of 04:35, 4 August 2022
Specifications (產品規格)
RSB-3430 Testing method (RSB-3430 測試方法)
RS-232 x2 :
Note:ttymxc2 –COM_3 ttymxc3-COM_4
'''$ stty -F /dev/ttymxc2 -echo -onlcr 115200 crtscts $ cat /dev/ttymxc2 & $ echo "Serial Port Test" > /dev/ttymxc2
USB
Insert a USB disk usb 1-1.2: new high-speed USB device number 4 using ci_hdrc usb-storage 1-1.2:1.0: USB Mass Storage device detected scsi2 : usb-storage 1-1.2:1.0 scsi 2:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS sd 2:0:0:0: [sda] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] No Caching mode page found sd 2:0:0:0: [sda] Assuming drive cache: write through sd 2:0:0:0: [sda] No Caching mode page found sd 2:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sd 2:0:0:0: [sda] No Caching mode page found sd 2:0:0:0: [sda] Assuming drive cache: write through sd 2:0:0:0: [sda] Attached SCSI removable disk
LAN
ifconfig eth1 8.8.8.8
RSB-3720 Testing method (RSB-3720 測試方法)
COM Port
Rear IO – RS-232 x 2
USB x 2
Ethernet x 1
Note:
ttymxc1 – COM3
ttymxc3 – COM4
RS-232(COM3):
# stty -F /dev/ttymxc1 -echo -onlcr 115200 # cat /dev/ttymxc1 & # echo "Serial Port Test" > /dev/ttymxc1
RS-232(COM3):
# stty -F /dev/ttymxc3 -echo -onlcr 115200 # cat /dev/ttymxc3 & # echo "Serial Port Test" > /dev/ttymxc3
USB
USB3.0 HUB+USB Keyeboard&Mouse USB3.0 driver data copy compare
Ethernet
