Difference between revisions of "1. Using AndroidTool."
Xingxing.li (talk | contribs) |
Xingxing.li (talk | contribs) |
||
Line 50: | Line 50: | ||
rkoot # =>rbrom | rkoot # =>rbrom | ||
− | I2C2 speed:100000Hz | + | I2C2 speed: 100000Hz |
</div> | </div> | ||
<span style="background:white">''<span lang="EN-US" style="font-size:10.5pt"><span style="font-family:"><span style="color:#252525">Debian 9.x</span></span></span>''''''<span style="font-size:10.5pt"><span style="color:#252525">:</span></span>'''</span> | <span style="background:white">''<span lang="EN-US" style="font-size:10.5pt"><span style="font-family:"><span style="color:#252525">Debian 9.x</span></span></span>''''''<span style="font-size:10.5pt"><span style="color:#252525">:</span></span>'''</span> |
Revision as of 04:20, 18 May 2023
Step1 请先准备一条mirco USB 线材和Debug Cable
Mirco USB
Debug Cable
插一张Debug cable 图片
Step2 Double click DriverInstal
插一张DriverInstall图片
Step3 Enter into MASKROM mode .
There are two ways to enter MASKROM
1. Hardware way to enter MASKROM
Step1将Mirco USB的OTG端插在板卡的USB0_OTG1端口上,USB端插在PC上,如下图
插一张图片
Step 2 将底板ROM-DB5901的SW1(BOOT SEELECT)拨码如下
插一张SW1拨码开关的图片
Step 3 使用12V 3A的电源上电,并打开瑞芯微开发工具V2.65,如下图
插一张进入MASROM设备模式的图片
Step 4当板卡进入MASKROM模式后,将底板ROM-DB5901 SW1的4、5拨回OFF(1-6均为OFF),再点击“执行”开始进行烧录。
插一张ADB的图片
2. Software way to enter MASKROM
When the device boot up to android or debian, you can use ADB or Debug console, send command "reboot loader" .
Or Press "ctrl + c" key when booting into uboot, until get the following information on debug console :
Android 10:
Hit any key to stop autoboot:0
rkboot # <INTERUPT>
rkoot # =>rbrom
I2C2 speed: 100000Hz
Debian 9.x':
Hit any key to stop autoboot:0
rkboot # <INTERUPT>
rkoot # =>rbrom
插一张loader图片
点击“高级功能”,进行选择,点击“进入Maskrom”,如下图所示:
插两张设置图片