Difference between revisions of "Advantech Robotic Suite/Advantech ROS2 Data Format"
From ESS-WIKI
(→Setup) |
|||
Line 68: | Line 68: | ||
This section will introduct you how to setup node in your environmant. | This section will introduct you how to setup node in your environmant. | ||
− | 1. Setup ROS2 environmant variables | + | 1. Setup ROS2 environmant variables: |
<pre>$ source /opt/ros/${ROS_DISTRO}/setup.bash | <pre>$ source /opt/ros/${ROS_DISTRO}/setup.bash | ||
</pre> | </pre> |
Revision as of 09:27, 26 May 2023
Introduction
The message definition of Advantech ROS node are located in include/adv_msgs folder, message file (.msg) is defined for node data publish/subscribe and action file (.action) is defined for setting sensor data.
Message definition
AdvSensor.msg
The file AdvSensor.msg is a message definition that holds a detail hardware sensor data that Advantech device/board provided.
# This is a message that holds a detail hardware sensor data that Advantech device/board provided. # string sensor # Sensor name string type # Sensor type: "v", "bv" or "sv" bool bv # Boolean type of sensor value float64 v # Number type of sensor value string sv # String type of sensor value uint64 ts # Timestamp od sensor value
Action definition
AdvSensorSet.action
The file AdvSensorSet.action' is a request/response/feedback that holds a detail hardware sensor data that Advantech device/board provided.
Action Type | Action name | Action File |
adv_msgs/action/AdvSensorSet | adv_sensor_set | AdvSensorSet.action |
# This is a request/response/feedback that holds a detail hardware sensor data that Advantech device/board provided. # string cmd # Request command of set sensor value string sensor # Sensor name of set request string type # Sensor type: "v", "bv" or "sv" bool bv # Boolean type of sensor value float64 v # Number type of sensor value string sv # String type of sensor value --- int16 code # Result code, request accept: 100, unaccept: code > 100 --- int16 status # Status feedback of set sensor request string sensor # Sensor name feedback of set request string info # Information feedback of set request uint64 ts # Timestamp of sensor value
Setup
This section will introduct you how to setup node in your environmant.
1. Setup ROS2 environmant variables:
$ source /opt/ros/${ROS_DISTRO}/setup.bash
2. Setup Advantech ROS2 message definition:
$ source /usr/local/Advantech/ros/${ROS_DISTRO}/include/edge-converter-ros2/adv_msgs/install/local_setup.bash