Difference between revisions of "Using AndroidTool."
From ESS-WIKI
Xingxing.li (talk | contribs) |
Xingxing.li (talk | contribs) |
||
| Line 20: | Line 20: | ||
[[File:ROM-5880 for SOM-DB2510.png|800x600px|ROM-5880 for SOM-DB2510.png]] | [[File:ROM-5880 for SOM-DB2510.png|800x600px|ROM-5880 for SOM-DB2510.png]] | ||
| − | === '''Step 3 | + | |
| + | === '''Step 3 电脑鼠标双击瑞芯微开发工具V2.92应用程序''' === | ||
[[File:ROM-5880 RKDevTool.v2.92.png|RTENOTITLE]] | [[File:ROM-5880 RKDevTool.v2.92.png|RTENOTITLE]] | ||
Revision as of 02:23, 28 August 2023
Contents
Step 1 List
a) 一根Type_C to USB的cable（USB3.0）
b) 一个12V，3A的电源，给底板SOM-DB2510供电使能
c) 一个debug 小板&cable -ROM-ED20（研华料号：19A2ED2000-01）
Step 2 架设环境如下：
Step 3 电脑鼠标双击瑞芯微开发工具V2.92应用程序
Step 4 Enter into MASKROM mode
When the device boot up to android or debian, you can use ADB or Debug console, send command "reboot loader" .
Or Press "ctrl + c" key when booting into uboot, until get the following information on debug console :
Android 7.1：
Hit any key to stop autoboot: 0 rkboot # <INTERRUPT> rkboot # loader
Debian 9.x：
Hit any key to stop autoboot: 0 rkboot # <INTERRUPT> rkboot # rbrom
Step 5 当核心板进入MASKROM模式后，再点击“执行”开始进行烧录
Step 6 烧录完成后，如下图
