Difference between revisions of "RSB-3730 user guide"
Xingxing.li (talk | contribs) (→Linux基本使用方法（Linux Basic usage method）) |
Xingxing.li (talk | contribs) |
||
| Line 228: | Line 228: | ||
QSPI: /dev/mtd0 | QSPI: /dev/mtd0 | ||
| + | |||
== '''Linux基本使用方法（Linux Basic usage method）''' == | == '''Linux基本使用方法（Linux Basic usage method）''' == | ||
| − | === [[RSB-3730_Display_Setting|Display Setting]] === | + | === '''[[RSB-3730_Display_Setting|Display Setting]]''' === |
| − | === [[RSB-3730_UART（RS-232/RS-485）|UART（RS-232/RS-485）]] === | + | === '''[[RSB-3730_UART（RS-232/RS-485）|UART（RS-232/RS-485）]]''' === |
| − | === [[RSB-3730_USB|USB]] === | + | === '''[[RSB-3730_USB|USB]]''' === |
| − | === [[RSB-3730_Ethernet|Ethernet]] === | + | === '''[[RSB-3730_Ethernet|Ethernet]]''' === |
| − | === [[RSB-3730_WiFi_Setup|WiFi Setup]] === | + | === '''[[RSB-3730_WiFi_Setup|WiFi Setup]]''' === |
| − | === [[RSB-3730_BT|BT]] === | + | === '''[[RSB-3730_BT|BT]]''' === |
| − | === [[RSB-3730_4/5G|4/5G]] === | + | === '''[[RSB-3730_4/5G|4/5G]]''' === |
| − | === [[RSB-3730_Audio|Audio]] === | + | === '''[[RSB-3730_Audio|Audio]]''' === |
| − | === [[RSB-3730_GPIO|GPIO]] === | + | === '''[[RSB-3730_GPIO|GPIO]]''' === |
| − | === [[RSB-3730_I2C_Test|I2C Test]] === | + | === '''[[RSB-3730_I2C_Test|I2C Test]]''' === |
| − | === [[RSB-3730_RTC|RTC]] === | + | === '''[[RSB-3730_RTC|RTC]]''' === |
| − | === [[RSB-3730_Watchdog|Watchdog]] === | + | === '''[[RSB-3730_Watchdog|Watchdog]]''' === |
== '''BSP/Linux编译''' == | == '''BSP/Linux编译''' == | ||
Revision as of 07:23, 10 November 2023
Contents
产品介绍（Product Presentation）
产品特性(Product Features)
- NXP i.MX 8M PLUS 4xA53@1.8GHz
- Integrate 2.3 TOPS NPU and extend 8-26 TOPS AI card
- 4kP30,1080p60 HEVC, H.264, VP9, VP8 decoding
- 1080p60 H.265, H.264 encoding
- 1xHDMI2.0
- 5xGbE LAN, 1xGbE Fiber
- USB3.0,USB2.0,RS232,RS485,CAN FD,SATA,SD
- 8 Channels Mic Array
- Support AI card/5G/4G/GPS/ Wi-Fi 5/Wi-Fi6/BT
- Support TPM,TCM
- Linux and, Andriod
- Embeded DeviceOn, DeviceOn.CommBridge
产品官网链接（Product official website link）
RSB-3730 - NXP i.MX 8M Mini Cortex-A53 2.5" SBC with UIO40-Express - Advantech
硬件接口说明（Hardware interface description）
接口布局图 Board Layout
接口尺寸 Board Dimension
Jumper List
| Jumper list | |
| VDD | VDD 3.3V &5V LVDS VDD & Backlight power level select |
| BLP1 | LVDS Backlight power 12V select |
| SW1 | AT &ATX Mode select and boot mode select |
| BTN | Power Button |
Connector List
| COM1/DEBUG2 | Debug CONN |
| BAT | RTC CONN |
| M.2 | M.2 CONN |
| LINE OUT | LINE OUT CONN |
| MIC IN | MIC IN CONN |
| UIO1 | UIO1 |
| UIO2 | UIO2 |
| LVDS | LVDS CONN |
| SD | SD slot |
| SIM | SIM slot |
| OTG | OTG |
| DCIN | DC-IN JACK |
| USB1 | USB CONN |
| HDMI | HDMI CONN |
| COM | COM CONN |
| RST | RST CONN |
| LED | LED |
| Mini PCIE | Mini PCIE CONN |
| LAN1 | RJ45 LAN |
快速入门（Quick Start）
系统下载（OS Dowload）
Note： LIV= Yocto Linux, UIV=Ubuntu, DIV = Debian, AIV=Android
LBV=BSP, LIV= Image
LIV9=Yocto2.5, LIVA=Yocto3.0, LIVB=Yocto 3.3……
See more details :
Introduction of Released Image
| Product | Image Version | Release Date | Release Version | Release notes | Image Download | BSP Download Tag | Comment | SDK | Module | Test Report |
| RSB-3730 | VA1041 | 2023/04/23 | RTM | Release_Note |
Baidu Password：a887 |
imx8LBVA1041.xml |
2G RTM 4G N.A |
SDK | Modules | Test Report |
| RSB-3730 | VA1045 | 2023/05/06 | Alpha | Release_Note |
Baidu Password：a887 |
imx8LBVA1045.xml | 2G Alpha | SDK | Modules | Test Report |
| RSB-3730 | VA1045 | 2023/05/06 | RTM | Release_Note |
Baidu Password：a887 |
imx8LBVA1045.xml | 4G RTM | SDK | Modules | Test Report |
系统更新方法（System update method）
Install the System from SD Card
1. Copy imx-image-full-imx8mmrsb3730a2-xxxxxx.rootfs.sdcard package to your desk- top. use ubuntu OS.
2. Insert SD card to PC.
3. Make a bootable SD card. For example, the node of an SD card is /dev/sdv.
# umount /dev/sdv* # dd if=./imx-image-full-imx8mmrsb3730a2-xxxx.rootfs.sdcard \ of=/dev/sdv bs=1M # sync
4. Insert SD card and copy imx-image-full-imx8mmrsb3730a1-xxxxxx.rootfs.sdcard to USB disk.
5. Insert USB disk and SD card then boot the whole system from SD card by changing SW1 to 1-2 ON.
6. Enter usb disk folder, make a bootable emmc.
# cd /run/media/sda1/ # umount /dev/mmcblk2* # dd if=./imx-image-full-imx8mmrsb3730a2-xxxx.rootfs.sdcard \ of=/dev/mmcblk2 bs=1M # sync
Note:
eMMC：/dev/mmcblk2
SD: /dev/mmcblk1
QSPI: /dev/mtd0