Difference between revisions of "IoTGateway/Features/Linux/Module"
From ESS-WIKI
(→AMM561KT) |
(→AM Telecom AMM561KT) |
||
Line 67: | Line 67: | ||
==4G== | ==4G== | ||
===AM Telecom AMM561KT=== | ===AM Telecom AMM561KT=== | ||
+ | The following operations are performed with UBC-222(U222LBV2011). | ||
+ | * linux kernel config | ||
+ | <tt><small> | ||
+ | ::Device Drivers ---> | ||
+ | :::[*] USB support ---> | ||
+ | ::::<span style="color:red">'''<M> Support for Host-side USB'''</span> | ||
+ | :::[*] Network device support ---> | ||
+ | ::::USB Network Adapters ---> | ||
+ | :::::<M> Multi-purpose USB Networking Framework | ||
+ | :::::<M> Host for RNDIS and ActiveSync devices (EXPERIMENTAL) | ||
+ | </small> | ||
+ | </tt> | ||
==Bluetooth== | ==Bluetooth== |
Revision as of 08:04, 20 September 2016
Contents
3G
EWM-C106FT01E
Sierra AirPrime MC8090
The following operations are performed with UBC-221 using U221LBV1050.
- linux kernel config
- set the following lines to meta-advantech/recipes-kernel/linux/linux-yocto-clanton/advantech.cfg
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
- add the following line to meta-advantech/recipes-kernel/advantech-init/files/advantech.conf
sierra
- execute the following command
$ bitbake advantech-init
- rebuild the kernel
$ bitbake linux-yocto-clanton
- rebuild the full image
$ bitbake image-full
- practical test on target board
# pppd connect 'chat -v -s -t 10 "" "AT" "" "ATDT*99#" "CONNECT" ""' \
user username password password /dev/ttyUSB3 460800 nodetach crtscts debug usepeerdns defaultroute &
# ifconfig
# pinc -c5 8.8.8.8
Telit HE910-D
The following operations are performed with UBC-221 using U221LBV1050.
- practical test on target board
# modprobe cdc-acm
# dmesg | grep ttyACM
# pppd connect 'chat -v -s -t 10 "" "AT" "" "ATDT*99#" "CONNECT" ""' \
user username password password /dev/ttyACM0 460800 nodetach crtscts debug usepeerdns defaultroute &
# pinc -c5 8.8.8.8
4G
AM Telecom AMM561KT
The following operations are performed with UBC-222(U222LBV2011).
- linux kernel config
- Device Drivers --->
- [*] USB support --->
- <M> Support for Host-side USB
- [*] Network device support --->
- USB Network Adapters --->
- <M> Multi-purpose USB Networking Framework
- <M> Host for RNDIS and ActiveSync devices (EXPERIMENTAL)
- USB Network Adapters --->
- [*] USB support --->
- Device Drivers --->
Bluetooth
EWM-W155H01E
Please refer to Bluetooth Testing Guide for Quark Platform for all operations performed using UBC-222 with U222LBV2011.
WiFi
EWM-W142F01E
EWM-W151H01E
EWM-W155H01E
USB
EMIO-200U3
Set CONFIG_USB_XHCI_HCD=y in kernel config