|
|
Line 101: |
Line 101: |
| | | |
| | | |
− |
| |
− | = RSB-3730 =
| |
− |
| |
− | <!--== '''接口布局和尺寸(Layout and Sizes)''' == --><!--'''[[File:UIO-4032 photo1 2021-10-27 143242.jpg|RTENOTITLE]]''' --><!-- 
| |
− |
| |
− | <!--'''[[File:UIO-4032 photo2 2021-10-27 143326.jpg|RTENOTITLE]]''' --><!-- --><!--'''[[File:UIO-4032 photo3 2021-10-27 143358.jpg|RTENOTITLE]]'''-->
| |
− |
| |
− | '''<headertabs></headertabs>Rear IO – RS-232 x2 (ttymxc1 & ttymxc3)<br/> RS-232(4032_COM3):'''
| |
− | <pre># stty -F /dev/ttymxc0 -echo -onlcr 115200
| |
− | # cat /dev/ttymxc1 &
| |
− | # echo "Serial Port Test" > /dev/ttymxc0</pre>
| |
− |
| |
− | [[File:UIO-4032 rearIO 232 com3.png|RTENOTITLE]]
| |
− |
| |
− | RS-232(4032_COM4)
| |
− | <pre># stty -F /dev/ttymxc3 -echo -onlcr 115200
| |
− | # cat /dev/ttymxc3 &
| |
− | # echo "Serial Port Test" > /dev/ttymxc3
| |
− | </pre>
| |
− |
| |
− | [[File:UIO-4032 rearIO 232 com4.png|RTENOTITLE]]
| |
− |
| |
− | USB x2<br/> USB3.0 HUB+USB Keyeboard&Mouse<br/> USB3.0 driver data copy compare
| |
− |
| |
− | Ethernet x1
| |
− |
| |
− | [[File:UIO-4032 rearIO ethernet.png|RTENOTITLE]]
| |
− |
| |
− |
| |
− |
| |
− | == <headertabs></headertabs> ==
| |
− | = RSB-3710 =
| |
− |
| |
− | ''' Note: RS-232: /dev/ttyS0 <br/> GPIO : need to connect loopback.<br/> RS-485: pin1 data- & pin2 data+ (ttyUSB0)'''
| |
− |
| |
− | '''RS-232'''
| |
− | <pre>$ stty -F /dev/ttyS0 -echo -onlcr 115200 crtscts
| |
− | $ cat /dev/ttyS0 &
| |
− | $ echo "Serial Port Test" > /dev/ttyS0</pre>
| |
− |
| |
− | '''RS485 <br/> <br/> Test RS-485 with Adam-4520.'''
| |
− | <pre>$ stty -F /dev/ttyUSB0 115200
| |
− | $ echo "Serial Test" > /dev/ttyUSB0</pre>
| |
− |
| |
− | '''GPIO '''
| |
− |
| |
− | '''[[File:RSB-3710 GPIO define 2022-01-20 142613.jpg|RTENOTITLE]]'''
| |
− |
| |
− | [[File:RSB-3710 gpio1 2022-01-20 142757.jpg|RTENOTITLE]]
| |
− |
| |
− | [[File:RSB-3710 gpio2 2022-01-20 142824.jpg|RTENOTITLE]]
| |
Revision as of 03:04, 25 March 2024
|
General Specificationn
- 2 x USB 2.0
- 2 x 2 wires RS-232
- 1 x GbE
- Dimension: 146 x 31 x 22mm
|
Environment Specification
- Weight: 200g
- Operating Humidity: 5 ~ 95% relative humidity, non-condensing
- Operating Temperature: -40 ~ 85 C
- Storage Temperature: -40 ~ 85 ㆍC and 60 C @ 95% RH Non-Condensing
|
Ordering Information
|
P/N
|
Description
|
UIO-4032
|
UIO-4032, 1 GbE, 2 USB, 2 RS-232
|
Find Other Products
|
|
RSB-3430
RS-232 x2 :
Note:ttymxc2 –COM_3 ttymxc3-COM_4
'''$ stty -F /dev/ttymxc2 -echo -onlcr 115200 crtscts
$ cat /dev/ttymxc2 &
$ echo "Serial Port Test" > /dev/ttymxc2
USB
Insert a USB disk
usb 1-1.2: new high-speed USB device number 4 using ci_hdrc
usb-storage 1-1.2:1.0: USB Mass Storage device detected
scsi2 : usb-storage 1-1.2:1.0
scsi 2:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: [sda] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] Attached SCSI removable disk
LAN
ifconfig eth1 8.8.8.8
RSB-3720
COM Port
Rear IO – RS-232 x 2
USB x 2
Ethernet x 1
Note:
ttymxc1 – COM3
ttymxc3 – COM4
RS-232(COM3):
# stty -F /dev/ttymxc1 -echo -onlcr 115200
# cat /dev/ttymxc1 &
# echo "Serial Port Test" > /dev/ttymxc1
RS-232(COM3):
# stty -F /dev/ttymxc3 -echo -onlcr 115200
# cat /dev/ttymxc3 &
# echo "Serial Port Test" > /dev/ttymxc3
USB
USB3.0 HUB+USB Keyeboard&Mouse
USB3.0 driver data copy compare
Ethernet