Difference between revisions of "UIO-4034"
From ESS-WIKI
Jems.cheng (talk | contribs) |
Jems.cheng (talk | contribs) |
||
| Line 139: | Line 139: | ||
= RSB-3810 = | = RSB-3810 = | ||
| + | |||
| + | {| border="1" cellpadding="1" cellspacing="1" | ||
| + | |- | ||
| + | | colspan="1" rowspan="2" | 1 | ||
| + | | colspan="1" rowspan="2" | | ||
| + | UART | ||
| + | |||
| + | COM_3:ttyS3 | ||
| + | |||
| + | COM_4:ttyS1 | ||
| + | |||
| + | | $ stty -F /dev/ttyS3 -echo -onlcr 921600 raw<br/> $ cat /dev/ttyS3 &<br/> $ echo "Serial Port Test" > /dev/ttyS3<br/> or<br/> $ microcom -s 921600 -X /dev/ttyS3 | ||
| + | |- | ||
| + | | $ stty -F /dev/ttyS1 -echo -onlcr 921600 raw<br/> $ cat /dev/ttyS1 &<br/> $ echo "Serial Port Test" > /dev/ttyS1<br/> or<br/> $ microcom -s 921600 -X /dev/ttyS1 | ||
| + | |- | ||
| + | | 2 | ||
| + | | CAN Bus | ||
| + | | | ||
| + | NA | ||
| + | |||
| + | |- | ||
| + | | 3 | ||
| + | | EEPROM | ||
| + | | # echo -n $'\x06\x05\x04\x03\x02\x01' > /data/test1<br/> # dd if=/data/test1 of=/sys/bus/i2c/devices/3-0050/eeprom<br/> # dd if=/sys/bus/i2c/devices/3-0050/eeprom of=/data/test2 conv=fsync | ||
| + | |} | ||
<headertabs></headertabs> | <headertabs></headertabs> | ||
Revision as of 06:30, 1 August 2024
|
|
[edit]
Note: RS-232: /dev/ttymxc2
RS-485: pin1 data- & pin2 data+ (ttyUSB0)
RS-232
$ stty -F /dev/ttymxc2 -echo -onlcr 115200 crtscts $ cat /dev/ttymxc2 & $ echo "Serial Port Test" > /dev/ttymxc2
CAN Bus
$ ip link set can0 up type can bitrate 125000 $ ifconfig can0 up $ ip link set can1 up type can bitrate 125000 $ ifconfig can1 up $ candump can0 & $ cansend can1 1F334455#1122334455667788
RS-232(COM3):
RS-232 x2 (ttymxc1 & ttymxc3) # stty -F /dev/ttymxc1 -echo -onlcr 115200 # cat /dev/ttymxc1 & # echo "Serial Port Test" > /dev/ttymxc1
RS-232(COM4)
# stty -F /dev/ttymxc3 -echo -onlcr 115200 # cat /dev/ttymxc3 & # echo "Serial Port Test" > /dev/ttymxc3
CAN
# ip link set can0 up type can bitrate 125000 # ifconfig can0 up # ip link set can1 up type can bitrate 125000 # ifconfig can1 up # candump can0 & # cansend can1 1F334455#1122334455667788
Rear IO – RS-232 x2 (ttymxc1 & ttymxc3)
RS-232(4034_COM3):
# stty -F /dev/ttymxc0 -echo -onlcr 115200 # cat /dev/ttymxc0 & # echo "Serial Port Test" > /dev/ttymxc0
RS-232(4034_COM4)
# stty -F /dev/ttymxc3 -echo -onlcr 115200 # cat /dev/ttymxc3 & # echo "Serial Port Test" > /dev/ttymxc3
CAN x1
N/A (RSB-3730 not support CAN Bus)
COM Port
Rear IO – RS-232 x 2
USB x 2
Ethernet x 1
Note:
ttyS0– COM3
ttyS4– COM4
RS-232(COM3):
# stty -F /dev/ttyS0 -echo -onlcr 115200 # cat /dev/ttyS0 & # echo "Serial Port Test" > /dev/ttyS0
RS-232(COM3):
# stty -F /dev/ttyS4 -echo -onlcr 115200 # cat /dev/ttyS4 & # echo "Serial Port Test" > /dev/ttyS4
USB3.0 HUB+USB Keyeboard&Mouse USB3.0 driver data copy compare
CAN
$ ip link set can0 up type can bitrate 125000 $ ifconfig can0 up $ ip link set can1 up type can bitrate 125000 $ ifconfig can1 up $ candump can0 & $ cansend can1 1F334455#1122334455667788
| 1 |
UART COM_3:ttyS3 COM_4:ttyS1 |
$ stty -F /dev/ttyS3 -echo -onlcr 921600 raw $ cat /dev/ttyS3 & $ echo "Serial Port Test" > /dev/ttyS3 or $ microcom -s 921600 -X /dev/ttyS3 |
| $ stty -F /dev/ttyS1 -echo -onlcr 921600 raw $ cat /dev/ttyS1 & $ echo "Serial Port Test" > /dev/ttyS1 or $ microcom -s 921600 -X /dev/ttyS1 | ||
| 2 | CAN Bus |
NA |
| 3 | EEPROM | # echo -n $'\x06\x05\x04\x03\x02\x01' > /data/test1 # dd if=/data/test1 of=/sys/bus/i2c/devices/3-0050/eeprom # dd if=/sys/bus/i2c/devices/3-0050/eeprom of=/data/test2 conv=fsync |