Difference between revisions of "EPC-R2860 windowsonarm user guide"

Revision as of 06:39, 12 December 2024

產品介紹(Product introduction )

產品特性(Product Features)

• Qualcomm 8 Kryo cores up to 2.7GHz
• Onboard LPDDR5 8GB, 8533MT/s memory
• Onboard 128GB UFS and 128GB eMMC
• 1x 2ch. LVDS, 1x DP and 1x HDMI for displays
• 2x USB3.2 Gen1, 2x USB2.0, 2x PCIe Gen3.0 x1, 2x 4wire UART, 1x SPI,16x GPIO, 1x I2C, 2x MIPI-CSI x4
• 1x Micro SD and 1x Nano SIM
• Support Windows 11 IoT Enterprise

產品官網連結(Product official website link)

 ROM-2860

硬件接口說明(Hardware interface introduction)

接口布局和尺寸(Layout and Sizes)

EPC-R2860 接口布局圖 Board Dimension Layout

快速入門 (Quick Start)

SW1

• SW1(1-off,2-on) : eMMC boot
• SW1(1-on,2-on) : UFS boot

SW2

• SW2(1-on): Forced Recovery
• SW2(1-off): Normal Boot
• SW2(2-on): AT mode
• SW2(2-off):ATx mode

系统下载 (OS Download)

   TBD

燒錄方法 (Flash eMMC Method)

 ROM-2860 Windows installation method

1. Prepare a windows PC, Installed 7zip.
2. Use 7z decompress rom2860_image_ADV0.5.5.7z (Password is 12345678)
3. Install QUD.WIN.1.1 Installer_10065.1 1.zip
4. Use micro USB cable downing image to ROM-2860.

5.Turn off the power, Change ROM-2860 SW2 to 1 on and 2 on for download mode, then turn on the power.

6.Then Press SW4 button.

7.You can see QDloader (COMXX) in Device manager(In your laptop or PC)

8. Execute burnimage.bat COMXX

Note: When you execute the bat file . need to “press any key” by three time (you can ignore the message

9. Need to wait 1 or 2 hours (depend on your pc )

10. If the process fails, it will display the error screen (red screen).

11.If the process successes , it will show “ the operation completed successfully” , then turn off the power 

12. Disconnect with ROM-2860

13. Change Switch(SW2)  to 1 off 2 on , then turn on the power

14. Re-plug the power.
 

15. After turn the power , press SW4 

16. Connect with HDMI or DP , Its start to boot up from windows OS.