Difference between revisions of "Using RKTool for ASR-A501."
From ESS-WIKI
Xingxing.li (talk | contribs) |
Xingxing.li (talk | contribs) |
||
| Line 1: | Line 1: | ||
| − | === ''' | + | === '''For example, the PC used is a laptop. The specifications are as follows：''' === |
<span style="background:white"><span style="color:#002060">[[File:PC specification.png|RTENOTITLE]]</span></span> | <span style="background:white"><span style="color:#002060">[[File:PC specification.png|RTENOTITLE]]</span></span> | ||
| Line 6: | Line 6: | ||
<font color="#002060">Decompress the downloaded image on the PC.</font> | <font color="#002060">Decompress the downloaded image on the PC.</font> | ||
| − | === ''' | + | === '''Open the following file, follow the steps and double-click to install the DriverInstall program, as shown in the figure below:''' === |
[[File:ASR-A501 OTG 1.png|RTENOTITLE]] | [[File:ASR-A501 OTG 1.png|RTENOTITLE]] | ||
| Line 13: | Line 13: | ||
[[File:ASR-A501 OTG v5.13.png|RTENOTITLE]] | [[File:ASR-A501 OTG v5.13.png|RTENOTITLE]] | ||
| − | + | <div>Change Tool language in config.ini, please change "Selected: to "2"</div> | |
| − | |||
| − | |||
选择工具语言:Selected=1(中文)<--Chinese ;Selected=2(英文)<-- English [Language] Kinds=2 Selected=2 LangPath=Language\ | 选择工具语言:Selected=1(中文)<--Chinese ;Selected=2(英文)<-- English [Language] Kinds=2 Selected=2 LangPath=Language\ | ||
[[File:RSB-4810 set language method configini.PNG|RTENOTITLE]] | [[File:RSB-4810 set language method configini.PNG|RTENOTITLE]] | ||
| + | === '''Go to the RKDevTool_Release folder and run the RKDevTool.exe program.''' === | ||
| − | + | [[File:ASR-A501 OTG Step2 RKDevTool.png|RTENOTITLE]] | |
| − | |||
| − | [[File:ASR-A501 OTG Step2 RKDevTool.png]] | ||
'''Note: Please ensure that the path for burning the file is correct.''' | '''Note: Please ensure that the path for burning the file is correct.''' | ||
| − | [[File:ASR-A501 OTG Step2.1.png]] | + | [[File:ASR-A501 OTG Step2.1.png|RTENOTITLE]] |
| − | [[File:ASR-A501 OTG Step 2.png]] | + | [[File:ASR-A501 OTG Step 2.png|RTENOTITLE]] |
| + | === '''The test environment is set up as follows:''' === | ||
| + | [[File:ASR-A501 OTG Step3.png|RTENOTITLE]] | ||
| + | [[File:ASR-A501 OTG Step3.1.png|RTENOTITLE]] | ||
| − | + | [[File:ASR-A501 OTG Step3.2.png|RTENOTITLE]][[File:ASR-A501 OTG J1.png|RTENOTITLE]] | |
| − | + | === '''Open the putty tool, enter the MASKROM mode through the debug port, then click "Execute" to start burning the OS.''' === | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | === ''' | ||
'''Method 1:''' After powering on and starting up, press "Ctrl+C" to enter "u-boot", input the "rbrom" command, and enter the MASKROM mode. | '''Method 1:''' After powering on and starting up, press "Ctrl+C" to enter "u-boot", input the "rbrom" command, and enter the MASKROM mode. | ||
| Line 52: | Line 45: | ||
rkboot # rbrom</pre> | rkboot # rbrom</pre> | ||
| − | [[File:ASR-A501 OTG Step4.png]] | + | [[File:ASR-A501 OTG Step4.png|RTENOTITLE]] |
'''Method Two: '''Press the "MASKROM" button, then power on and turn on the device, and it will directly enter the MASKROM mode. | '''Method Two: '''Press the "MASKROM" button, then power on and turn on the device, and it will directly enter the MASKROM mode. | ||
| − | [[File:ASR-A501 OTG Step4.1.png | + | [[File:ASR-A501 OTG Step4.1.png|RTENOTITLE]] |
| − | |||
| − | |||
| − | |||
| − | |||
| − | [[File:ASR-A501 | + | [[File:ASR-A501 MASKrom Button.png|RTENOTITLE]] |
| + | [[File:ASR-A501 OTG Step4.2.png|RTENOTITLE]] | ||
| − | === ''' | + | === [[File:ASR-A501 OTG Step4.3.png|RTENOTITLE]]'''After burning, open putty to check the image version.''' === |
| − | [[File:ASR-A501 OTG Step5.png]] | + | [[File:ASR-A501 OTG Step5.png|RTENOTITLE]] |
| − | [[File:ASR-A501 OTG Step5.1.png]] | + | [[File:ASR-A501 OTG Step5.1.png|RTENOTITLE]] |
Revision as of 04:20, 19 May 2025
Contents
- 1 For example, the PC used is a laptop. The specifications are as follows：
- 2 Open the following file, follow the steps and double-click to install the DriverInstall program, as shown in the figure below:
- 3 Go to the RKDevTool_Release folder and run the RKDevTool.exe program.
- 4 The test environment is set up as follows:
- 5 Open the putty tool, enter the MASKROM mode through the debug port, then click "Execute" to start burning the OS.
- 6 After burning, open putty to check the image version.
For example, the PC used is a laptop. The specifications are as follows：
Decompress the downloaded image on the PC.
Open the following file, follow the steps and double-click to install the DriverInstall program, as shown in the figure below:
Change Tool language in config.ini, please change "Selected: to "2"
选择工具语言:Selected=1(中文)<--Chinese ;Selected=2(英文)<-- English [Language] Kinds=2 Selected=2 LangPath=Language\
Go to the RKDevTool_Release folder and run the RKDevTool.exe program.
Note: Please ensure that the path for burning the file is correct.
The test environment is set up as follows:
Open the putty tool, enter the MASKROM mode through the debug port, then click "Execute" to start burning the OS.
Method 1: After powering on and starting up, press "Ctrl+C" to enter "u-boot", input the "rbrom" command, and enter the MASKROM mode.
Debian ：
Hit any key to stop autoboot: 0 rkboot # <INTERRUPT> rkboot # rbrom
Method Two: Press the "MASKROM" button, then power on and turn on the device, and it will directly enter the MASKROM mode.
After burning, open putty to check the image version.
