Difference between revisions of "AOM-3841 on AOM-DB3500 Usering RKTool."
Xingxing.li (talk | contribs) (Created page with " === '''For example, the PC used is a laptop. The specifications are as follows：''' === <span style="font-size:14px"><span style="line-height:inherit"><span style="color:#2...") |
Xingxing.li (talk | contribs) |
||
| Line 21: | Line 21: | ||
'''[[File:AOM-341 on AOM-DB3500 OTG Tool.png]]''' | '''[[File:AOM-341 on AOM-DB3500 OTG Tool.png]]''' | ||
| + | |||
=== '''PC Install the driver''' === | === '''PC Install the driver''' === | ||
| Line 26: | Line 27: | ||
1、Extract Driver Assitant_v5.13.zip and follow these steps: Mounting driver. | 1、Extract Driver Assitant_v5.13.zip and follow these steps: Mounting driver. | ||
| − | + | [[File:AOM-3821 Driver Assitant v5.13.png|RTENOTITLE]] | |
2、Run the installer and wait for the installation to succeed. | 2、Run the installer and wait for the installation to succeed. | ||
| − | + | [[File:ASR-A501 OTG RK v5.13.png|RTENOTITLE]][[File:ASR-A501 OTG v5.13.png|RTENOTITLE]] | |
3、Change Tool language in config.ini, please change "Selected: to "2" | 3、Change Tool language in config.ini, please change "Selected: to "2" | ||
| Line 36: | Line 37: | ||
选择工具语言:Selected=1(中文)<--Chinese ;Selected=2(英文)<-- English [Language] Kinds=2 Selected=2 LangPath=Language\ | 选择工具语言:Selected=1(中文)<--Chinese ;Selected=2(英文)<-- English [Language] Kinds=2 Selected=2 LangPath=Language\ | ||
| − | + | [[File:RSB-4810 set language method configini.PNG|RTENOTITLE]] | |
| − | |||
| − | |||
=== '''Enter into MASKROM mode''' === | === '''Enter into MASKROM mode''' === | ||
Revision as of 08:13, 2 March 2026
Contents
For example, the PC used is a laptop. The specifications are as follows：
Decompress the downloaded image on the PC.
List
1、Prepare a TYPE_C to USB cable.
2、Prepare a DC_IN 24V 60W Adapter.（Advantech Part Number：96PSA-A60W24T2-3）
3、Prepare a USB to UART console cable.
4、Prepare an HDMI monitor and plug the HDMI cable into the HDMI port on the base plate.
The setup environment is as follows.
PC Install the driver
1、Extract Driver Assitant_v5.13.zip and follow these steps: Mounting driver.
2、Run the installer and wait for the installation to succeed.
3、Change Tool language in config.ini, please change "Selected: to "2"
选择工具语言:Selected=1(中文)<--Chinese ;Selected=2(英文)<-- English [Language] Kinds=2 Selected=2 LangPath=Language\
Enter into MASKROM mode
When the device boot up to android or debian, you can use ADB or Debug console, send command "reboot loader" .
Or Press "ctrl + c" key when booting into uboot, until get the following information on debug console :
Android ：
Hit any key to stop autoboot: 0 rkboot # <INTERRUPT> rkboot # loader
Debian ：
Hit any key to stop autoboot: 0 rkboot # <INTERRUPT> rkboot # rbrom
Next:
SW1 setting: Switch all positions 1 to 6 to ON to force the device into "MASKROM" mode. After entering the MASKROM mode, switch positions 4 and 5 back to OFF.