Revision as of 07:12, 3 February 2017

Android Image Downloads

Download Android Image (list below):

FTP:

user name:

password:

${BOARD} : target board name (list below)

rsb_4410 / rom_3420 / rom_5420 / rom_7420 / ubc_ds31 / ubc_200 / rsb_6410

${BSPHOME} : the directory that BSP tarball extacted to

${SD_DEVICE} : device name of SD card in Ubuntu (e.g. /dev/sdf)

${MMC_DEVICE} : device name of on-board eMMC in Android (e.g. /dev/block/mmcblk0)

debug console / serial console

serial terminal program (e.g. minicom, putty, teraterm ...) that serial port is configured to 115200 8N1

terminal console

terminal program (e.g. gnome-terminal, xfce4-terminal ...)

Perform the following command in terminal console

$ cd ${BSPHOME}/scripts

$ ./mksd-android.sh ${SD_DEVICE}

Boot up from SD card

Perform the following commands in debug console

# cd /data/mkimage/scripts

# sh ./mksd-android.sh ${MMC_DEVICE}

Remove SD card, then target board can boot up from onboard eMMC.

@@ Line 44: / Line 44: @@
 ::<code># sh ./mksd-android.sh <span style="color: rgb(128, 0, 128);">'''${MMC_DEVICE}'''</span></code>
 :Remove SD card, then target board can boot up from onboard eMMC.
+:<span style="font-size: small;">The </span><font face="courier new">mksd-android.sh </font><span style="font-size: small;">script reference:&nbsp;[https://github.com/ADVANTECH-Corp/android_mk_sd_emmc_script <span style="color: rgb(0, 0, 255);">https://github.com/ADVANTECH-Corp/android_mk_sd_emmc_script</span>]</span>
 = <font size="3" color="#00aff0">Release Note</font> =