Difference between revisions of "WISE-1530 RF Continue Tx Manual"
From ESS-WIKI
Eric.liang (talk | contribs) |
Erick.huang (talk | contribs) |
||
| Line 7: | Line 7: | ||
*PC running the Microsoft® Windows® 7 operating systems | *PC running the Microsoft® Windows® 7 operating systems | ||
| − | Please refer to the following steps for setup a WISE | + | Please refer to the following steps for setup a WISE-1530 boards. |
'''Step01:''' Please prepare boards as below. | '''Step01:''' Please prepare boards as below. | ||
| − | [[File:WISE-1530 | + | [[File:WISE-1530 RF HW setup.png]] |
'''①''' WISE-1530 | '''①''' WISE-1530 | ||
| Line 17: | Line 17: | ||
'''②''' WISE-1500 | '''②''' WISE-1500 | ||
| − | '''③''' | + | '''③''' Power connector |
| − | '''④''' | + | '''④''' Reset button |
'''⑤''' CN2 on WISE-1500 | '''⑤''' CN2 on WISE-1500 | ||
| Line 44: | Line 44: | ||
[[File:Mbed uart.png|649x466px|Mbed uart.png]] | [[File:Mbed uart.png|649x466px|Mbed uart.png]] | ||
| − | |||
[[Category:Editor]] | [[Category:Editor]] | ||
Revision as of 02:42, 19 July 2017
Preparing for Hardware
The user needs to prepare for hardware as following:
- WISE-1530, WISE-1500 and WISE-ED22.
- 802.11b/g/n (2.4 GHz) Wireless Access Point (AP).
- PC running the Microsoft® Windows® 7 operating systems
Please refer to the following steps for setup a WISE-1530 boards.
Step01: Please prepare boards as below.
① WISE-1530
② WISE-1500
③ Power connector
④ Reset button
⑤ CN2 on WISE-1500
⑥ SW3 on WISE-1500
- Please check pin1 and pin2 to “OFF” as default.
- Switch pin2 to decide whether running “backup to default” while device booting. “ON”: enabled, “OFF”: disable
⑦ One reset button on WISE-1500 and the other on WISE-ED22
⑧ Micro USB connector
- Drag-n-drop programming
- Serial port and debugging
- Power supplies for UART1 debug port
⑨ RF connector
Step02: Connect the WISE-ED22 to PC using micro-USB cable.
- Install Driver ( Download latest driver )
- The device will be visible in the Device Manager as below, user can use serial tools (putty, tera term ...etc.) to key in command.
