Difference between revisions of "WISE-1530 RF Continue Tx Manual"
From ESS-WIKI
Erick.huang (talk | contribs) |
Erick.huang (talk | contribs) |
||
| Line 11: | Line 11: | ||
'''Step01:''' Please prepare boards as below. | '''Step01:''' Please prepare boards as below. | ||
| − | [[File:WISE-1530 RF HW setup.png]] | + | [[File:WISE-1530 RF HW setup.png|RTENOTITLE]] |
'''①''' WISE-1530 | '''①''' WISE-1530 | ||
| Line 21: | Line 21: | ||
'''④''' Reset button | '''④''' Reset button | ||
| − | '''⑤''' | + | '''⑤''' UART connector |
| − | '''⑥''' | + | '''⑥''' RF connector |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
'''Step02:''' Connect the WISE-ED22 to PC using micro-USB cable. | '''Step02:''' Connect the WISE-ED22 to PC using micro-USB cable. | ||
Revision as of 02:49, 19 July 2017
Preparing for Hardware
The user needs to prepare for hardware as following:
- WISE-1530, WISE-1500 and WISE-ED22.
- 802.11b/g/n (2.4 GHz) Wireless Access Point (AP).
- PC running the Microsoft® Windows® 7 operating systems
Please refer to the following steps for setup a WISE-1530 boards.
Step01: Please prepare boards as below.
① WISE-1530
② WISE-1500
③ Power connector
④ Reset button
⑤ UART connector
⑥ RF connector
Step02: Connect the WISE-ED22 to PC using micro-USB cable.
- Install Driver ( Download latest driver )
- The device will be visible in the Device Manager as below, user can use serial tools (putty, tera term ...etc.) to key in command.
