Difference between revisions of "WISE-1530 RF Continue Tx Manual"
From ESS-WIKI
Erick.huang (talk | contribs) |
Erick.huang (talk | contribs) |
||
| Line 25: | Line 25: | ||
'''⑥''' RF connector | '''⑥''' RF connector | ||
| − | '''Step02:''' Connect the WISE- | + | '''Step02:''' Connect the WISE-1530 to PC via USB-to-UART cable. |
| − | * Install | + | * Install USB-to-UART driver. |
| − | *The device will be visible in the Device Manager as below, user can use serial tools (putty, tera term ...etc.) | + | *The device will be visible in the Device Manager as below, user can use serial port tools (putty, tera term ...etc.). |
| − | [[File: | + | [[File:WISE-1530 uart2.png|50x50px]] |
[[Category:Editor]] | [[Category:Editor]] | ||
Revision as of 03:01, 19 July 2017
Preparing for Hardware
The user needs to prepare for hardware as following:
- WISE-1530, WISE-1500 and WISE-ED22.
- 802.11b/g/n (2.4 GHz) Wireless Access Point (AP).
- PC running the Microsoft® Windows® 7 operating systems
Please refer to the following steps for setup a WISE-1530 boards.
Step01: Please prepare boards as below.
① WISE-1530
② WISE-1500
③ Power connector
④ Reset button
⑤ UART connector
⑥ RF connector
Step02: Connect the WISE-1530 to PC via USB-to-UART cable.
- Install USB-to-UART driver.
- The device will be visible in the Device Manager as below, user can use serial port tools (putty, tera term ...etc.).
