Difference between revisions of "WISE-1530 RF Continue Tx Manual"
Erick.huang (talk | contribs) |
Erick.huang (talk | contribs) |
||
| Line 37: | Line 37: | ||
= RF Test Command = | = RF Test Command = | ||
| − | Launch serial port tool, you can see " Console app start, type 'help' " on screen | + | Launch serial port tool, you can see " Console app start, type 'help' " on screen after power on or reset. |
'''Join: '''Connect to AP | '''Join: '''Connect to AP | ||
| Line 60: | Line 60: | ||
<span style="background-color:#D3D3D3;">Ex: iperf -c 192.168.1.1 -u -t 30</span> | <span style="background-color:#D3D3D3;">Ex: iperf -c 192.168.1.1 -u -t 30</span> | ||
| − | |||
Revision as of 04:55, 19 July 2017
Preparing for Hardware
The user needs to prepare for hardware as following:
- WISE-1530 and WISE-1500 board.
- WISE-1500 power cable.
- WISE-1530 antenna.
- USB-to-UART cable.
- 802.11b/g/n (2.4 GHz) Wireless Access Point (AP).
- PC running the Microsoft® Windows® 7 operating systems
Please refer to the following steps for setup a WISE-1530 boards.
Step01: Please prepare boards as below.
① WISE-1530
② WISE-1500
③ Power connector
④ Reset button
⑤ UART connector
⑥ RF connector
Step02: Connect the WISE-1530 to PC via USB-to-UART cable.
- Install USB-to-UART driver.
- The device will be visible in the Device Manager as below, user can use serial port tools (putty, tera term ...etc.).
RF Test Command
Launch serial port tool, you can see " Console app start, type 'help' " on screen after power on or reset.
Join: Connect to AP
join <ssid> <open|wpa_aes|wpa_tkip|wpa2|wpa2_tkip|wpa2_aes|wep> [key] [channel] [ip netmask gateway]
Ex: join join RT66 wpa2_aes 987135238
Ping:
ping <destination> [-i <interval in ms>] [-n <number>] [-l <length>]
Ex: ping 192.168.1.1 -i 10 -n 10
Iperf: Test Tx
iperf [-s|-c host ip] [options]
-u: use UDP mode
-t: time(second)
Ex: iperf -c 192.168.1.1 -u -t 30