Difference between revisions of "MCU/WISE-1540"
From ESS-WIKI
Line 140: | Line 140: | ||
| style="color:black; background:gold" align="center" | 43 | | style="color:black; background:gold" align="center" | 43 | ||
| style="background:gold" align="center" | N.C. | | style="background:gold" align="center" | N.C. | ||
− | | style="background: | + | | style="background:gold" align="center" | {{abbr|GPIO3|Module: GPIO9(PIN54), Chip: GPIOA1-bit1}} |
| style="color:black; background:gold" align="center" | 44 | | style="color:black; background:gold" align="center" | 44 | ||
|- | |- | ||
Line 223: | Line 223: | ||
| | | | ||
|} | |} | ||
− | |||
− | |||
== SDK == | == SDK == | ||
[[MCU/WISE-1540_SDK|SDK]] | [[MCU/WISE-1540_SDK|SDK]] |
Revision as of 09:39, 9 August 2017
WISE-1540
M2.COM Low Power SmartMesh IP Node- ARM Cortex-M4 processor
- RAM 64 KB SRAM / 256KB Flash
- SmartMesh IP Node 2.4GHz, 802.15.4e Wireless Mote Module
- Support
UART | I2C | SPI | GPIO | PWM | ADC |
1 | 1 | 1 | 8 | 1 | 4 |
- 22 x 30 mm M.2 key E
M2.COM Pinout
1 | GND | VCC | 2 |
3 | USB_DP | VCC | 4 |
5 | USB_DM | N.C. | 6 |
7 | GND | N.C. | 8 |
9 | N.C. | N.C. | 10 |
11 | N.C. | N.C. | 12 |
13 | N.C. | N.C. | 14 |
15 | N.C. | CB_RESET_OUT# | 16 |
17 | N.C. | GND | 18 |
19 | N.C. | CB_PWR_ON | 20 |
21 | N.C. | UART TXD | 22 |
23 | N.C. | Connector Key | |
Connector Key | Connector Key | ||
Connector Key | Connector Key | ||
Connector Key | Connector Key | ||
Connector Key | UART RXD | 32 | |
33 | GND | UART RTS | 34 |
35 | N.C. | UART CTS | 36 |
37 | N.C. | GPIO0 | 38 |
39 | GND | GPIO1 | 40 |
41 | PWM0 | GPIO2 | 42 |
43 | N.C. | GPIO3 | 44 |
45 | GND | GPIO4 | 46 |
47 | ADC0 | GPIO5 | 48 |
49 | N.C. | GPIO6 | 50 |
51 | GND | GPIO7 | 52 |
53 | ADC2 | N.C. | 54 |
55 | ADC3 | W_DISABLE# | 56 |
57 | GND | I2C_DATA | 58 |
59 | ADC4 | I2C_CLK | 60 |
61 | N.C. | SPI0_MOSI | 62 |
63 | GND | SPI0_MISO | 64 |
65 | VDD_RTC | SPI0_CLK | 66 |
67 | Backup# | SPI0_CS0# | 68 |
69 | GND | N.C. | 70 |
71 | RESET_IN# | VCC | 72 |
73 | Wake# | VCC | 74 |
75 | GND |