Difference between revisions of "MCU/WISE-1570-FirmwareUpdate-For-BC95"
From ESS-WIKI
Line 1: | Line 1: | ||
− | = Introduction = | + | = Introduction = == Running CCS installer ==<div style="margin-left:0.847cm;margin-right:0cm;">'''Step01:''' Prepare boards. Note: If you want to get pin-definition detailed, please get in touch with the contact person from ADVANTECH. [[File:Wise1570_nbiot_firmware_update_01.png|center|500px|Wise1570_nbiot_firmware_update_01.png]]<br/>[[File:Wise1570_nbiot_firmware_update_02.png|center|500px|Wise1570_nbiot_firmware_update_02.png]]<br/>'''Step02:''' Check the number of COM port detected from PC. Note: If you don't setup WISE-ED22 before, please refer to link for it firstly. [[File:Wise1570_nbiot_firmware_update_03.png|center|300px|Wise1570_nbiot_firmware_update_03.png]]<br/>'''Step03:''' Find batch file “Codeloader-Erase.bat”, check the number of com port detected from PC in it and run it to erase for BC95. Note: If you don't have programming tool "Codeloader", please get in touch with the contact person from ADVANTECH. [[File:Wise1570_nbiot_firmware_update_04.png|center|300px|Wise1570_nbiot_firmware_update_04.png]]<br/>[[File:Wise1570_nbiot_firmware_update_05.png|center|600px|Wise1570_nbiot_firmware_update_05.png]]<br/>'''Step04:''' Reset. [[File:Wise1570_nbiot_firmware_update_06.png|center|500px|Wise1570_nbiot_firmware_update_06.png]]<br/>[[File:Wise1570_nbiot_firmware_update_10.png|center|500px|Wise1570_nbiot_firmware_update_10.png]]<br/>[[File:Wise1570_nbiot_firmware_update_11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]]<br/>'''Step05:''' Find batch file “Codeloader-Erase.bat”, check the number of com port detected from PC in it and run it to erase for BC95. [[File:Wise1570_nbiot_firmware_update_07.png|center|300px|Wise1570_nbiot_firmware_update_07.png]]<br/>[[File:Wise1570_nbiot_firmware_update_08.png|center|500px|Wise1570_nbiot_firmware_update_08.png]]<br/>'''Step06:''' Find batch file “CodeLoaderBC95HA.bat”, modify the number of com port detected from PC in it and run it to program for BC95. [[File:Wise1570_nbiot_firmware_update_09.png|center|500px|Wise1570_nbiot_firmware_update_09.png]]<br/>[[File:Wise1570_nbiot_firmware_update_10.png|center|500px|Wise1570_nbiot_firmware_update_10.png]]<br/>[[File:Wise1570_nbiot_firmware_update_11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]]<br/></div> {| style="border-spacing:0;width:15.748cm;" |- | |} |
− | |||
− | == Running CCS installer == | ||
− | <div style="margin-left:0.847cm;margin-right:0cm;"> | ||
− | '''Step01:''' Prepare boards. | ||
− | Note: If you want to get pin-definition detailed, please get in touch with the contact person from ADVANTECH.<br> | ||
− | |||
− | |||
− | |||
− | '''Step02:''' Check the number of COM port detected from PC. | ||
− | Note: If you don't setup WISE-ED22 before, please refer to link for it firstly. | ||
− | |||
− | |||
− | |||
− | '''Step03:''' Find batch file “Codeloader-Erase.bat”, check the number of com port detected from PC in it and run it to erase for BC95. | ||
− | Note: If you don't have programming tool "Codeloader", please get in touch with the contact person from ADVANTECH.<br> | ||
− | |||
− | '''Step04:''' | ||
− | |||
− | ''' | ||
− | |||
− | ''' | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | </div> | ||
− | |||
− | |||
− | {| style="border-spacing:0;width:15.748cm;" | ||
− | |- | ||
− | | | ||
− | |} |
Revision as of 07:33, 7 September 2017
= Introduction = == Running CCS installer ==Step01: Prepare boards. Note: If you want to get pin-definition detailed, please get in touch with the contact person from ADVANTECH. [[File:Wise1570_nbiot_firmware_update_01.png|center|500px|Wise1570_nbiot_firmware_update_01.png]]
[[File:Wise1570_nbiot_firmware_update_02.png|center|500px|Wise1570_nbiot_firmware_update_02.png]]
Step02: Check the number of COM port detected from PC. Note: If you don't setup WISE-ED22 before, please refer to link for it firstly. [[File:Wise1570_nbiot_firmware_update_03.png|center|300px|Wise1570_nbiot_firmware_update_03.png]]
Step03: Find batch file “Codeloader-Erase.bat”, check the number of com port detected from PC in it and run it to erase for BC95. Note: If you don't have programming tool "Codeloader", please get in touch with the contact person from ADVANTECH. [[File:Wise1570_nbiot_firmware_update_04.png|center|300px|Wise1570_nbiot_firmware_update_04.png]]
[[File:Wise1570_nbiot_firmware_update_05.png|center|600px|Wise1570_nbiot_firmware_update_05.png]]
Step04: Reset. [[File:Wise1570_nbiot_firmware_update_06.png|center|500px|Wise1570_nbiot_firmware_update_06.png]]
[[File:Wise1570_nbiot_firmware_update_10.png|center|500px|Wise1570_nbiot_firmware_update_10.png]]
[[File:Wise1570_nbiot_firmware_update_11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]]
Step05: Find batch file “Codeloader-Erase.bat”, check the number of com port detected from PC in it and run it to erase for BC95. [[File:Wise1570_nbiot_firmware_update_07.png|center|300px|Wise1570_nbiot_firmware_update_07.png]]
[[File:Wise1570_nbiot_firmware_update_08.png|center|500px|Wise1570_nbiot_firmware_update_08.png]]
Step06: Find batch file “CodeLoaderBC95HA.bat”, modify the number of com port detected from PC in it and run it to program for BC95. [[File:Wise1570_nbiot_firmware_update_09.png|center|500px|Wise1570_nbiot_firmware_update_09.png]]
[[File:Wise1570_nbiot_firmware_update_10.png|center|500px|Wise1570_nbiot_firmware_update_10.png]]
[[File:Wise1570_nbiot_firmware_update_11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]]
{| style="border-spacing:0;width:15.748cm;" |- | |}
[[File:Wise1570_nbiot_firmware_update_02.png|center|500px|Wise1570_nbiot_firmware_update_02.png]]
Step02: Check the number of COM port detected from PC. Note: If you don't setup WISE-ED22 before, please refer to link for it firstly. [[File:Wise1570_nbiot_firmware_update_03.png|center|300px|Wise1570_nbiot_firmware_update_03.png]]
Step03: Find batch file “Codeloader-Erase.bat”, check the number of com port detected from PC in it and run it to erase for BC95. Note: If you don't have programming tool "Codeloader", please get in touch with the contact person from ADVANTECH. [[File:Wise1570_nbiot_firmware_update_04.png|center|300px|Wise1570_nbiot_firmware_update_04.png]]
[[File:Wise1570_nbiot_firmware_update_05.png|center|600px|Wise1570_nbiot_firmware_update_05.png]]
Step04: Reset. [[File:Wise1570_nbiot_firmware_update_06.png|center|500px|Wise1570_nbiot_firmware_update_06.png]]
[[File:Wise1570_nbiot_firmware_update_10.png|center|500px|Wise1570_nbiot_firmware_update_10.png]]
[[File:Wise1570_nbiot_firmware_update_11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]]
Step05: Find batch file “Codeloader-Erase.bat”, check the number of com port detected from PC in it and run it to erase for BC95. [[File:Wise1570_nbiot_firmware_update_07.png|center|300px|Wise1570_nbiot_firmware_update_07.png]]
[[File:Wise1570_nbiot_firmware_update_08.png|center|500px|Wise1570_nbiot_firmware_update_08.png]]
Step06: Find batch file “CodeLoaderBC95HA.bat”, modify the number of com port detected from PC in it and run it to program for BC95. [[File:Wise1570_nbiot_firmware_update_09.png|center|500px|Wise1570_nbiot_firmware_update_09.png]]
[[File:Wise1570_nbiot_firmware_update_10.png|center|500px|Wise1570_nbiot_firmware_update_10.png]]
[[File:Wise1570_nbiot_firmware_update_11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]]