Difference between revisions of "MCU/WISE-1570-FirmwareUpdate-For-BC95"
Line 1: | Line 1: | ||
− | = Introduction = == Running CCS installer == | + | = Introduction = |
− | Step01: Prepare boards. Note: If you want to get pin-definition detailed, please get in touch with the contact person from ADVANTECH. [[File: | + | |
− | [[File: | + | == Running CCS installer == |
− | Step02: Check the number of COM port detected from PC. Note: If you don't setup WISE-ED22 before, please refer to link for it firstly. [[File: | + | '''Step01:''' Prepare boards. |
− | Step03: Find batch file “Codeloader-Erase.bat”, check the number of com port detected from PC in it and run it to erase for BC95. Note: If you don't have programming tool "Codeloader", please get in touch with the contact person from ADVANTECH. [[File: | + | Note: If you want to get pin-definition detailed, please get in touch with the contact person from ADVANTECH. <br> |
− | [[File: | + | |
− | Step04: Reset. [[File: | + | [[File:Wise1570 nbiot firmware update 01.png|center|500px|Wise1570_nbiot_firmware_update_01.png]] <br> |
− | [[File: | + | [[File:Wise1570 nbiot firmware update 02.png|center|500px|Wise1570_nbiot_firmware_update_02.png]] <br> |
− | [[File: | + | |
− | Step05: Find batch file “Codeloader-Erase.bat”, check the number of com port detected from PC in it and run it to erase for BC95. [[File: | + | '''Step02:''' Check the number of COM port detected from PC. Note: If you don't setup WISE-ED22 before, please refer to link for it firstly. |
− | [[File: | + | |
− | Step06: Find batch file “CodeLoaderBC95HA.bat”, modify the number of com port detected from PC in it and run it to program for BC95. [[File: | + | [[File:Wise1570 nbiot firmware update 03.png|center|300px|Wise1570_nbiot_firmware_update_03.png]] <br> |
− | [[File: | + | |
− | [[File: | + | '''Step03:''' Find batch file “Codeloader-Erase.bat”, check the number of com port detected from PC in it and run it to erase for BC95. |
− | {| style="border-spacing:0;width:15.748cm;" |- | |} | + | Note: If you don't have programming tool "Codeloader", please get in touch with the contact person from ADVANTECH. |
+ | |||
+ | [[File:Wise1570 nbiot firmware update 04.png|center|300px|Wise1570_nbiot_firmware_update_04.png]] <br> | ||
+ | |||
+ | [[File:Wise1570 nbiot firmware update 05.png|center|600px|Wise1570_nbiot_firmware_update_05.png]] <br> | ||
+ | |||
+ | '''Step04:''' Reset. | ||
+ | |||
+ | [[File:Wise1570 nbiot firmware update 06.png|center|500px|Wise1570_nbiot_firmware_update_06.png]] <br> | ||
+ | |||
+ | [[File:Wise1570 nbiot firmware update 10.png|center|500px|Wise1570_nbiot_firmware_update_10.png]] <br> | ||
+ | |||
+ | [[File:Wise1570 nbiot firmware update 11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]] <br> | ||
+ | |||
+ | '''Step05:''' Find batch file “Codeloader-Erase.bat”, check the number of com port detected from PC in it and run it to erase for BC95. | ||
+ | |||
+ | [[File:Wise1570 nbiot firmware update 07.png|center|300px|Wise1570_nbiot_firmware_update_07.png]] <br> | ||
+ | |||
+ | [[File:Wise1570 nbiot firmware update 08.png|center|500px|Wise1570_nbiot_firmware_update_08.png]] <br> | ||
+ | |||
+ | '''Step06:''' Find batch file “CodeLoaderBC95HA.bat”, modify the number of com port detected from PC in it and run it to program for BC95. | ||
+ | |||
+ | [[File:Wise1570 nbiot firmware update 09.png|center|500px|Wise1570_nbiot_firmware_update_09.png]] <br> | ||
+ | |||
+ | [[File:Wise1570 nbiot firmware update 10.png|center|500px|Wise1570_nbiot_firmware_update_10.png]] <br> | ||
+ | |||
+ | [[File:Wise1570 nbiot firmware update 11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]] <br> | ||
+ | |||
+ | {| style="border-spacing:0;width:15.748cm;" | ||
+ | |- | ||
+ | | | ||
+ | |} |
Revision as of 07:39, 7 September 2017
Introduction
Running CCS installer
Step01: Prepare boards.
Note: If you want to get pin-definition detailed, please get in touch with the contact person from ADVANTECH.
Step02: Check the number of COM port detected from PC. Note: If you don't setup WISE-ED22 before, please refer to link for it firstly.
Step03: Find batch file “Codeloader-Erase.bat”, check the number of com port detected from PC in it and run it to erase for BC95. Note: If you don't have programming tool "Codeloader", please get in touch with the contact person from ADVANTECH.
Step04: Reset.
Step05: Find batch file “Codeloader-Erase.bat”, check the number of com port detected from PC in it and run it to erase for BC95.
Step06: Find batch file “CodeLoaderBC95HA.bat”, modify the number of com port detected from PC in it and run it to program for BC95.