Revision as of 11:53, 9 March 2016

Prerequisites

Installing cross toolchain

Please use bitbake command to build one toolchain installer or get a pre-built one.

Qt4 SDK

Please perform following command to make toolchain installer.

$ bitbake fsl-image-x11 -c populate-sdk

Please change working directory to where installer located and perform the following command.

$ sudo ./poky-eglibc-x86_64-fsl-image-x11-cortexa9hf-vfp-neon-toolchain-qt4-1.5.3.sh

Qt5 SDK

Please perform following command to make toolchain installer.

$ bitbake fsl-image-x11-qt5 -c populate-sdk

Please change working directory to where installer located and perform the following command.

$ sudo ./poky-eglibc-x86_64-fsl-image-x11-qt5-cortexa9hf-vfp-neon-toolchain-1.5.3.sh

Working with Eclipse

Installing the Eclipse IDE

Please download "eclipse-standard-kepler-R-linux-gtk-x86_64.tar.gz" manually, put it to directory ~/FILES/ and perform the following commands:

$ cd ~/
$ tar xvf ~/FILES/eclipse-standard-kepler-R-linux-gtk-x86_64.tar.gz

Starting the Eclipse IDE

$ source /opt/poky/1.5.3/environment-setup-cortexa9hf-vfp-neon-poky-linux-gnueabi
$ ~/eclipse/eclipse

1. select your workspace location

   

2. Make sure you are in your Workbench and select "Install New Software" from the "Help" pull-down menu.

   

3. Select "Kepler - http://download.eclipse.org/releases/kepler" from the "Work with:" pull-down menu.

   

4. Expand the box next to "Linux Tools" and select the LTTng - Linux Tracing Toolkit boxes.

   

5. Expand the box next to "Mobile and Device Development" and select the following boxes:

   

   

6. Expand the box next to "Programming Languages" and select the following boxes:

   

7. Complete the installation and restart the Eclipse IDE.

   

Installing the Plug-in

Configuring the Options

Creating the Project

Building the Project

Running the Application

Debugging the Application

References