Revision as of 05:39, 7 May 2018

Installation

1. Double click Agent_Modbus_Handler_2.0.0.exe to start installation.

2. Click "Next" on the Welcome screen.

3. Select Installation Folder and then click "Next" to continue.

4. Click "Install" on the Ready to Install screen to continue.

5. Installation completed, click "Finish" button to exit the Setup Wizard.

Configuration

1. Open File Explorer and change target folder to the Modbus Service installation folder.

2. Open and edit the file Mobus_Handler.ini

    2.1 Give a Name for the platform.

    2.2 Set the Protocol.

           For the modbus TCP devices:

           Protocol=Modbus_TCP

           ClientIP=(IP address of Modbus TCP devices)

           ClientPort=(Port of Modbus TCP devices)

           Modbus_Handler.ini Example:

[Platform]
Name=WISE-4012E
Protocol=Modbus_TCP
ClientIP=127.0.0.1
ClientPort=502
UnitID=1
Interval=3
#Interval: The time delay between two modbus access round in second. 
Delay=0
#Delay: The time delay between two modbus access in millisecond.
#Delay=0 means no delay.
Log=0

           For the modbus RTU devices:

           Protocol=Modbus_RTU

           SlavePort=(The serial port's device node of the gateway which connect to Modbus RTU devices)

           Baud=(The baud rate of the serial port)

           Parity=(The parity of the serial port)

            DataBits=(The data bits of the serial port)              

            StopBits=(The stop bits of the serial port)              

           Example:

    2.3 Set the number of modbus devices and device detail information file.

           Example:

    2.4 Set the content of device detail information.

           Example:

EdgeSense Linux Docker version

How to config Modbus Service and Restart Service

$cd ${Installed path}/Installer/packages/Plugins/docker-edgesense-image-x86/EdgeSense/EService-Modbus/config
$sudo vim Modbus_Handler.ini
$sudo docker restart service-modbus

JSON Format for upload data

{
   "Modbus_Handler":{
      "Platform":{
         "bn":"Platform",
         "e":[{"n":"Version","sv":"2.0.0"},
              {"n":"Description","sv":"This service is Modbus Service"},
              {"n":"Protocol","sv":"Modbus_TCP"},
              {"n":"Name","sv":"WISE-4012E"},
              {"n":"ClientIP","sv":"127.0.0.1"},
              {"n":"ClientPort","sv":"502"},
              {"n":"Connection","bv":true}]
      },
      "Modbus_Device0":{
         "bn":"Modbus_Device0",
         "e":[{"n":"UnitID","sv":"1"}],
         "Coils":{
            "bn":"Coils",
            "e":[{"n":"LED0","bv":true},
                 {"n":"LED1","bv":true},
                 {"n":"LED2","bv":false}]
         }
      },
      "Modbus_Device1":{
         "bn":"Modbus_Device1",
         "e":[{"n":"UnitID","sv":"2"}],
         "Discrete Inputs":{
            "bn":"Discrete Inputs",
            "e":[{"n":"Switch0","bv":false},
                 {"n":"Switch1","bv":true},
                 {"n":"Switch2","bv":false}]
         }
      }
   }
}

Modbus Configuration Template

Modbus_Handler.ini

[Platform]
Name=WISE-4012E
Protocol=Modbus_TCP
ClientIP=127.0.0.1
ClientPort=502
UnitID=1
Interval=3
#Interval: The time delay between two modbus access round in second. 
Delay=0
#Delay: The time delay between two modbus access in millisecond.
#Delay=0 means no delay.
Log=0

#Name=EKI-XXXX
#Protocol=Modbus_RTU
#SlavePort=COM1
#Baud=19200
#Parity=None
#DataBits=8
#StopBits=1

[Devices]
numberOfDevices=2
Device0=Modbus_Device0
Device1=Modbus_Device1

Modbus_Device0.ini

[DeviceInfo]
Name=Modbus_Device0

# For Modbus_TCP
UnitID=1

[Coils]
numberOfB=3
B0=0,LED0
B1=1,LED1
B2=2,LED2

Modbus_Device1.ini

[DeviceInfo]
Name=Modbus_Device1

# For Modbus_TCP
UnitID=2

[Discrete Inputs]
numberOfIB=3
IB0=0,Switch0
IB1=1,Switch1
IB2=2,Switch2